throwing 2 engine codes

[keiglo]

Hey guys. so my 89 hatch is throwing 2 codes. 11 (camshaft position sensor?) and 32 (EGR system?) i just wanted to quadruple check to make sure those were right, and then ask any possible suggestions as to what could be making that happen. i hear there could be a vac leak or something with the EGR and as for code 11.. well i really have no idea, i couldnt find much information! also would either of these cause misfires? because my car (http://zilvia.net/f/#) misfires, and bogs sometimes.. any help would be GREATLY appreciated! im a newb and dont wanna destroy my car!
http://zilvia.net/f/images/zilvia/statusicon/user_online.gif http://zilvia.net/f/images/zilvia/buttons/report.gif (http://zilvia.net/f/report.php?p=3065342) http://zilvia.net/f/images/zilvia/misc/progress.gif http://zilvia.net/f/images/zilvia/buttons/edit.gif (http://zilvia.net/f/editpost.php?do=editpost&p=3065342)

[keiglo]

so i did some more research and i figured out that its the Crank Angle Sensor. and that is in the distributor. so apparently it could just be dirty and all i have to do is clean it, hopefully its not broken because i bought a new distributor last week when i did a tune up. is it possible it was put in wrong and is not sitting right? (note i only bought cap and rotor, is it in there, or further down?) ill open it up when i get home from work and see whats wrong, any tips on how to clean or what to look for? thanks!