turbo lines need help

[vladimir240]

i got the curcuit sport lines, and have installed all of the except for the coolant lines that goes from the motor to the turbo. the lines supplied is too short to reach all the way around to the intake manifold. so how does everyone make it work??. any help is welcome. thanks.

[vladimir240]

Seriously people, no one has hooked up all of their CS steel lines? i'll try calling CS tomorrow and see. i need this car running-only means of tranpo.

[Sileighty_85]

intake manifold WTF why are you hooking it up to the Intake manifold?

[RacerX1]

Hook it up to the back of the motor, there should be a coolant hard line there.

[vladimir240]

from looking at it, i was under the impression that the line comes around the back of the motor and hooks up somewhere under the intake manifold. or does it go to the block behind the motor?

[RacerX1]

The line wont go all the way to the intake manifold, its not designed for that. There are hoses and another line that go to the back of the head and thats where the SS line should hook up.

[Sileighty_85]

See that little bitty line that "Y's" off the big one behind the head? thats where it goes
http://i73.photobucket.com/albums/i235/Neil_85/VFSH0158.jpg

[RacerX1]

The line on the right goin towards the rear of the head
http://i41.photobucket.com/albums/e283/sweetguyy7/SR20/SSLines.jpg
To here
http://i41.photobucket.com/albums/e283/sweetguyy7/SR20/RearWaterLine.jpg

[vladimir240]

Thanks for the input, and great pics guys. ill try putting the line in tomorrow and see

[vladimir240]

oh, i also just realized that i was sent s14 lines from phase2 instead of s13. but i called them up and they were cool with figuring it out. but still thanks alot guys, though this might make me not seen as ignorant as before

[fliprayzin240sx]

If you have S14 lines...KEEP IT and get an S14 upper water neck so you wont have to ever mess with that line in the back of the block.