s14 sr idles bad/runs super rich

[jivetoast]

i have a 95 240sx with a s14 sr with a NA ecu, i thought my MAF was bad but changed it out and still runs bad/wont go over 3k rpms~ when i unplug it it runs and idles perfectly, any ideas, im completely lost and super frustrated. lol.

[jorgezee1]

if your using a kouki ecu make sure the Maf is also for a kouki. i had a similar problem but i was using a s13sr maf when i should of been using a s14 sr maf. after I switched it the car ran fine. do you get any error codes on the ecu?

[jivetoast]

when i got my harness back from wiring specialties they said to use a 94-96 MAF but i used a 96 then tried a 95 didnt know there was a 94? lol

would i get a cel for codes? and how would i check on the ecu >.>

[warauto]

mine does the same runs rich as shit and idles bad but runs still....dont know wat to do

[warauto]

have stock ecu.....dont know how to fix mine

[waynehead05]

Wait... is the motor na, or turbo? Na uses a distributor doesn't it?

[jivetoast]

its a NA ecu. i think i found my problem. im using a stock KA MAF i need a stock SR20 MAF

[0wn3r]

its a NA ecu. i think i found my problem. im using a stock KA MAF i need a stock SR20 MAF

lol yea...that'd be it.

like someone already mentioned, make sure you get the right MAF. On my NA ecu I'm running 22680-69F01. If you try to run the F00, you'll run super super rich.

Part Numbers! (http://www.240sxmotoring.com/partnumbers.html)

As we speak I am pulling out my MAF. If you need one and want to take dibs on it before I put it up for sale let me know.

[jivetoast]

tthanks for the heads up PM'd you and thanks for the help on my dumb mistake.

[waynehead05]

I have a sohc one if you need it?

[jivetoast]

its gotta be 22680-69F01

[warauto]

someone did my swap, how will i know if i have my ka24de maf still on my car ?

[jivetoast]

look at the part numbers... and check if its metal or plastic.

[0wn3r]

Shipped

Included plug, and o-ring as well.