PDA

View Full Version : HKS SSQV Adjusment


silviaz
05-29-2009, 10:18 PM
Ok I have no boost gauge and my setup is freshly installed.

I have a HKS SSQV bov and i'm running the stock boost.
Right now, the adjustment screw in the back is opened at the maximum. Does it affect any performance that way ?

jr_ss
05-30-2009, 04:48 PM
The adjustment screw in the back is for adjusting the tension on the spring inside. The more tension the higher the PSI will be that it opens and so on. If it's not open right now at idle, you should be fine, but you could tighten it down a few turns if you'd like.