Removing RB25DET starter, on R32.

[Feint Movement]

Does anyone have any tricks on getting the top starter bolt off a RB25? Motor is in a R32 and we're trying to do a clutch change, but the top starter bolt is no co-operating. We can get a ratchet+extension+socket on it, but barely any way of getting leverage from overhead. Can't get at it from underneath due to steering linkage and hard lines.

[HYPNOTIK]

Drop the tranny mount, loosen the motor mounts and let it tip back. Then use a stubby wrench from underneath, it takes awhile but that's the easiest way I've found to do it.

[Sileighty_85]

ahhhh yes i remember those days....

If you have, use a 1/2in drive setup of exten, socket and U-Joints and use a breaker bar instead of a rachet (to help eliminate flex) and if you need to use a cheater bar.