sr problem

[Trevor87]

so i just finished my sr swap i followed the wiring guide from frsport...any way the car has no power to anything no wipers no clock nothing.. the harness did have three wires that were cut right bu the plug that goes into the ecu they are the red/white stripe, green/white stripe and green/black stripe...anybody know if these three wires could cause my problem? i dont really know anything about electrical stuff so any help would be great

edit: i used the sr lower harness could this be the reason why? i read that you need to use the ka lower harness but ive only head of that once

[Otherworldview]

I don't believe those are your issue as I have the same ones cut near the plug on my harness and my dash works fine.
http://i21.photobucket.com/albums/b285/Otherworldview/Cars/1991%20Nissan%20240sx/engine%20temp/ECU-Rightside.jpg

I could go out tomorrow morning and take a snapshot of the secondary harness so you can see if you want.

[Trevor87]

ya that would be great if you could thanks

[slider2828]

Did you hook up the other plug? the white plug that is up near the glove box? That is the plugs that deal with the dash.

[Trevor87]

ya the dash plug is connected...going to try replacing the 75a fuse tomorrow as well maybe somehow that blew or something as

[Otherworldview]

Previous owner made a mess of things, but here's my plug:
http://i21.photobucket.com/albums/b285/Otherworldview/Cars/1991%20Nissan%20240sx/engine%20temp/ECU-Dashwires.jpg
http://i21.photobucket.com/albums/b285/Otherworldview/Cars/1991%20Nissan%20240sx/engine%20temp/ECU-DashPlug.jpg

[Quack]

Did you do a battery relocation?

oh god i need to learn to read