KA injector connector malfuntion

[jdm2191]

on my ka my injector connector wire for my #2 injector was getting torn so i replace the connector and the wires and when i was changing it, it touch the fuel rail and it made a spark now my car doesnt start it clicks over like it wants to start but now it seems like there is no fuel goin into my motor....so is there a fuse or something that might of got blown that is not letting fuel go through??

[projectRDM]

You blew the EGI fuse. Next time turn the key off before hacking up your wiring harness.

[jdm2191]

so i didnt blow my ecu just my egi fuse?

[projectRDM]

More than likely. I wasn't there. Go check ALL fuses, then report back.

[jdm2191]

besides the egi fuse what other fuse should i check?

[jdm2191]

wasnt the EGI fuse....what should i check next the ecu??

[jdm2191]

What else could it be?

[projectRDM]

check all fuses

[jdm2191]

checked these fuses: egi, egi pump, fuel pump & installed another ecu and still the same and all the other fuses are fine so what other advise can you give me to solve this issue??

[projectRDM]

So EVERY SINGLE fuse in the car is good, and you've swapped a known working ECU in, and there's still nothing? Does the pump turn on at all?