Are these stock s13 SR cams? I got pics and model #'s!!!

[redsx13]

So i searched and searched but i need someone to verify what cams these are, or at least if they are stock or aftermarket. the # on them says 2515lb, other says 2515lx

I also listed this post in the "identify this" thread but that thread is more for rims and body kits, and this is a more technical question, so pleez no haten. :D

http://i279.photobucket.com/albums/kk141/redsx13/cimg0703ma8.jpg


http://i279.photobucket.com/albums/kk141/redsx13/cimg0706bq4.jpg

[4sfed180]

doing a search just on the forum does not give you all godly answers. use google. i types in that part number and sr20 and i got the link to 240sxforums.com. they had the same issue. new tomei products no longer say tomei on them. those cams are real. :)

[redsx13]

doing a search just on the forum does not give you all godly answers. use google. i types in that part number and sr20 and i got the link to 240sxforums.com. they had the same issue. new tomei products no longer say tomei on them. those cams are real. :)

i found the same link on my search, but it seems too good to be true. they came in my sr20 when i bought it as a clip. does anyone know the stock cam part #'s or have tomei cams and can verify?

[Sileighty_85]

Email Tomei with these numbers or your question and im sure they can help ya out.

[4sfed180]

it is not that uncommon to find aftermarket parts on clips or engine swaps. my buddy bought an sr20 swap like 3 years ago and when he got it it had injectors, t28, ecu, and an hks twin disk clutch in it. granted the clutch was pretty much blown but nothing a set of new disks cant fix :)

its possible. when the motors are pulled in japan then dont pop the covers to check if the motor has upgrades. it may as well have had cams put in by the previous owner.

good luck. contacting tomei is your best bet if youre still skeptical.

[redsx13]

it is not that uncommon to find aftermarket parts on clips or engine swaps. my buddy bought an sr20 swap like 3 years ago and when he got it it had injectors, t28, ecu, and an hks twin disk clutch in it. granted the clutch was pretty much blown but nothing a set of new disks cant fix :)

its possible. when the motors are pulled in japan then dont pop the covers to check if the motor has upgrades. it may as well have had cams put in by the previous owner.

good luck. contacting tomei is your best bet if youre still skeptical.

ya, my motor had...

-S14 turbo
-hks boost controller
-tomei a/f ratio gauge
-oil pressure gauge
-oil temp gauge
-water temp gauge
-greddy fmic
-s15 injectors
-r32 maf
-tomei oil filter adaptor plate (for oil temp/pressure)
-blitz turbo timer
-exhaust manifold
-turbo elbow
-tuned ecu
-Tomei cams!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
cams are not out of the question, btw here are some more pics (In addition tho the numbers above, both say 53j, the left one also says 11, right says 5)

***this is how the cams looked in the car, i did not clean them at all.***


http://i279.photobucket.com/albums/kk141/redsx13/011.jpg

http://i279.photobucket.com/albums/kk141/redsx13/008-1.jpg
http://i279.photobucket.com/albums/kk141/redsx13/007-1.jpg

[Sileighty_85]

damn man you got hooked up!

[redsx13]

Guess what!!!! Just got an email back from Tomei Motorsports Inc.!!:faint: here it is.................

Hi Brandon (redsx13),

I talked to you yesterday regarding the cams that you had looking to verify what type of TOMEI cams they were.


1.)2515LX for EXT 256-11.5mm SR20DET PONCAM SILVIA S13~S15
2.)2515LB for Inlet 265-11.5mm SR20DET PONCAM S13

TOMEI PONCAM
Part Number:143043

Thank you for the using of our products.

Best Regards
************************************************** ******
TOMEI POWERED USA INC.
RIKI ENDO
13 Orchard Ste 107 Lake Forest CA92630,USA
TEL:1-949-855-6577 FAX:1-949-855-6525
SKYPE: tomei_riki AIM: ELEKTRIK138
************************************************** ******

:wiggle::boink::boink::wiggle:
Im going to go party!

[4sfed180]

you owe me lunch for googling and finding initial info for you :)