RB25 starts then dies.

[yamisojdm]

My rb25 setup
-FMIC
-12" dual E-fans
-MP 60-1 turbo
-XSpower single mani
-custom 3" DP
-3" catback
-Manual boost controler
-turbo timer
-walbro
-fpr w/gauge
-boost gauge and A/F gauge


I've had the car since tuesday and it drove fine. Then this morning I went to start it up, it started just fine but idled less than 1,000 rpm then shuts off. Later in that day i tried it again. It started up and right before it died i gave it gas n kept it at 2,000rpm untill my temp meter got to where it was suppose to. Then it stayed on and i just let it cooled down then shut it off. I was thinking maybe it was just a cold start. Then 30 mins later I went to try again it would just start then not catch it's idle and die.



http://i22.photobucket.com/albums/b310/thachboi/th_01-10-09_1325.jpg (http://s22.photobucket.com/albums/b310/thachboi/?action=view&current=01-10-09_1325.flv)


Please help.

[handinpants]

Have you checked the fuel pressure when it is on? Also do a compression test. Is the maf plugged in?

[yamisojdm]

compression was tested at 155psi across all 6cylinders leak down test 5% with in spec. maf is plugged in and the fuel pressure was at 2 and a half....

[Monooxide]

Check for vacuum leaks and the such.

Also, make sure your IACV is adjusted correctly/properly functioning.

[yamisojdm]

adjusted the idle and now it idles just fine. Only thing is when i start it up it idles like at 500 so i just give it gas a bit n it catches back up to where it's suppose to idle.

[ANVIL]

check all your lines, you might have a vacuum leak