ka24de intake manifold

[gerson408]

hey guys just asking if any one has a write up on how to remove the intake manifold the engine i have is a ka24de.

[s13boy89]

just look at it then pull bolts off

[Sileighty_85]

Yeah Nissan Made one its called an FSM

[gerson408]

sorry buy my question actually is does it come off as a whole or is the bottom part supported by brackets??

[yota man]

Yes, you have to unbolt the brackets that are attached to the lower manifold and the block.

[s13boy89]

it comes off as 2 pieces the bottom then the top

[projectRDM]

There are two lower brackets. Throw them away once removed.

You can remove it in one piece or two, your call.

[gerson408]

alright cool i just wanna remove the top piece to get to this hose thats leaking coolant.

[gerson408]

alright so guys ran into another problem i fixed the hose that was leaking and put everything back together the way it was now when i go to crank the car it wont start all it does is crank and wont start. please get back to me asap

[projectRDM]

Vacuum leak more than likely, or you left a plug loose.

[gerson408]

alright ima check all my vaccum lines and see whats going on ill be back on in 5 mins

[gerson408]

if it was a leak the car would still start thought right??

[gerson408]

thanks to those who helped me. fixed it :)

[projectRDM]

Culprit? A large enough vacuum leak would not allow it to start, yes.

[gerson408]

it wasn't a vaccum leak its just i crossed the lines that go to the fuel filter and fuel line