IHasLongTorso
11-11-2008, 07:00 PM
the car is a 1990 240sx coupe, car is black, with black interior.
Exterior.
Silvia front conversion with h.i.d stock body.
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2771.jpg
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2786.jpg
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2774.jpg
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2776.jpg
the interior is stock with the exception of the nismo shiftnob, horn button, nrg quick release and momo hub, and sony cd player. and a blitz turbo timer.
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2799.jpg
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2807.jpg
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2806.jpg
the engine and suspension
-sr20 red top from an s13. with black top harness and ecu
-circuit sports intake manifold gasket
-nismo fpr
-turbo xs exhast manifold
-stock exhaust the car is good enough for street use and i have yet to receive a ticket ( knock on wood) and I have been pulled over a few times.
- stock turbo with adjustable wastegate and custom bracket.
-the motor has all new oem internals on the bottom end ( pistons, conrods, and the crank was balanced and polished)
-s15 motor mounts
-s15 turbo manifold gasket
-acl race bearings
-greddy hotpipe
- arp headstuds, rod bolts, and mainstuds
-custom grounding kit that works great
-individually grounded coilpacks
-cometic headgasket
-act street clutch rated at 362 ft lbs and light weight flywheel.
-the head has bean decked as well as the block
-the head internals have been replace with new factory ones. So new valve springs, cam blots, valves, retainers, and valve seals and lifters, and rocker arms.
- also has a gt spec down pipe
-yoshio factory radiator
-new coolant temp sensor
- new plugs ngk iridium 8s
-greddy airinx intake
- all new gaskets from nissan
-new fuel lines from goodyear and vacume lines
-new goodyear gatorback belt
- new oem oil pump and water pump
-nismo thermostat
-300zx fuel filter
- altinator pully
Suspension
- d2 coilovers
-secchi tension rods
-peak perfomance rucas
-peak performance rear toe arms
-energy steering rack bushings
-300zx front calipers with sloted and cross drilled rotors
-project mu break pads
-nismo wheel studs
-steel braided break lines
- 25 mm spacers( not pictured)
-viscous lsd with 5 bolt axles and a 4.1 final drive
- nismo clutch pivot
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2808.jpg
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2809.jpg
the wire harness was tucked inbetween the intake manifold.
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2810.jpg
I have had a few offers but I am asking 6,500 or best offer.
I am located in socal in orange county.
if there are anyquestions feel free to pm me or call me via my cell phone.
my number is 949-232-8349
thanks.
Exterior.
Silvia front conversion with h.i.d stock body.
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2771.jpg
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2786.jpg
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2774.jpg
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2776.jpg
the interior is stock with the exception of the nismo shiftnob, horn button, nrg quick release and momo hub, and sony cd player. and a blitz turbo timer.
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2799.jpg
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2807.jpg
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2806.jpg
the engine and suspension
-sr20 red top from an s13. with black top harness and ecu
-circuit sports intake manifold gasket
-nismo fpr
-turbo xs exhast manifold
-stock exhaust the car is good enough for street use and i have yet to receive a ticket ( knock on wood) and I have been pulled over a few times.
- stock turbo with adjustable wastegate and custom bracket.
-the motor has all new oem internals on the bottom end ( pistons, conrods, and the crank was balanced and polished)
-s15 motor mounts
-s15 turbo manifold gasket
-acl race bearings
-greddy hotpipe
- arp headstuds, rod bolts, and mainstuds
-custom grounding kit that works great
-individually grounded coilpacks
-cometic headgasket
-act street clutch rated at 362 ft lbs and light weight flywheel.
-the head has bean decked as well as the block
-the head internals have been replace with new factory ones. So new valve springs, cam blots, valves, retainers, and valve seals and lifters, and rocker arms.
- also has a gt spec down pipe
-yoshio factory radiator
-new coolant temp sensor
- new plugs ngk iridium 8s
-greddy airinx intake
- all new gaskets from nissan
-new fuel lines from goodyear and vacume lines
-new goodyear gatorback belt
- new oem oil pump and water pump
-nismo thermostat
-300zx fuel filter
- altinator pully
Suspension
- d2 coilovers
-secchi tension rods
-peak perfomance rucas
-peak performance rear toe arms
-energy steering rack bushings
-300zx front calipers with sloted and cross drilled rotors
-project mu break pads
-nismo wheel studs
-steel braided break lines
- 25 mm spacers( not pictured)
-viscous lsd with 5 bolt axles and a 4.1 final drive
- nismo clutch pivot
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2808.jpg
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2809.jpg
the wire harness was tucked inbetween the intake manifold.
http://i253.photobucket.com/albums/hh54/IHasLongTorso/IMG_2810.jpg
I have had a few offers but I am asking 6,500 or best offer.
I am located in socal in orange county.
if there are anyquestions feel free to pm me or call me via my cell phone.
my number is 949-232-8349
thanks.