PDA

View Full Version : SR / 300ZX Injector question (pics)


axiomatik
11-05-2008, 07:32 PM
So, one of the injectors has died on my redtop SR. After a little searching, I found that '95-'96 300ZX turbo injectors are replacements. However, the pictures on Courtesy Nissan's site look different than the one I took out of my car.

Here's the pic from Courtesy (LINK (http://www.courtesyparts.com/16603-injector-assy-fuel-300zx-z32-1995-1996-turbo-p-31329.html?cPath=882_883_900_902&)):
http://img.photobucket.com/albums/v685/nbrindley/240SX/300zxinjector.jpg

And here's a pic of my injector:
http://img.photobucket.com/albums/v685/nbrindley/240SX/Injector_edit.jpg

Notice the difference in the section I've highlighted? The inlet screens are much higher on my injector than in Courtesy's pic. In the pictures of the '90-'94 injectors that center section looks the same as mine, though the cap and the end of the injector are quite different.

Are these the right injectors? I tried calling a local dealer, but he told me there aren't any in the entire state of Georgia, so I can't go and look at one in person.

projectRDM
11-05-2008, 07:56 PM
They fit, are sidefeed, and 370cc. They may not look exact but they are the same application.

Ninjabread
11-05-2008, 11:38 PM
I have four exactly like yours. Same design.

I'm not sure if they are all good, but if you give me 10$ plus shipping, you can have all four of them!

Few of them are a bit chewed from being removed (not by me) and some are missing a pintle cap, but I see at least one that looks 100% OK.

Let me know!

*edit, there are actually 5, and 3 of them are in good knick.

axiomatik
11-06-2008, 03:58 PM
ah, so, despite the different inlet location, they still work with the SR fuel rail?

ninja - I'll PM ya back once I figure out what shipping I want.