removed my emblems

[vancouvers14]

so i removed my emblems over the weekend.  if anyone needs any advice on how or what products to use, just ask.  Here's my problem.  The nissan emblems (front and back) left 2 holes in the hood and taillights.  What should I do?  Fill them up and repaint it ($500), get silvia emblems ($150), or take my nissan emblems and repaint them flat black ($20)?  Any other options?

[ca18guy]

I say spray paint the exsisting one's. Were they black to begin with? If they were chrome use chrome spray paint, you would be surprised how good that stuff works.

[vancouvers14]

they're chrome.  i just like the idea of going around stealth.  one hour after removing the emblems, i went out to the clubs, and a girl stopped me to talk about my car, cause she had no idea what it was.  

but...  $500 might be too much to spend (to repaint my hood and bumper).  

[Gold240se]

If you wanted to fill the holes your self you could put some kind of flat surface on the other side of the hood. and put filler in the holes.  Let it dry, sand it, prime it, put tape around the edge and paint it.  I've never done this myself so don't take my word for it.  Or you could stop at the priming stage and let a pro paint it. And btw would you really have to have the whole hood painted for those two holes?  I'm not sure.

[Gold240se]

Personally if I was to repaint, I'd go pro. So I'm not sure if I helped <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sad.gif" border="0" valign="absmiddle" alt=':('>

[S13Grl]

I say paint them black, that'd look dope on a black car.

[vancouvers14]

but my car is gold...

if i paint it, i'll spend $$$ on a pro to do it. &nbsp;that's why its 500

[S13Grl]

Ohh, I'm so sorry! I thought your car was black!
Well... why don't you just get a Silvia Shield for the front, and completely remove them from the back?

[vancouvers14]

what could i replace the rear nissan emblem with?

[S13Grl]

See, that I can't tell you. My boyfriend left his uncovered, but his car is black.

o0o paint the emblems goldddd <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>

[chickenmanq]

Dude, put a Yugo emblem on it. &nbsp;( I don't know, just thought it'd be funny.) <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> &nbsp;Once save a pos Chevy cavalier wagon with cadillac emblems.

[chickenmanq]

WAIT! &nbsp;Better yet, get a vinyl sticker with your engine number on it. &nbsp;Like (ka24e). &nbsp;Just stick it over the holes. &nbsp;No repainting, and silly people won't know what it refers to. &nbsp;They'll think, oh cool, a new car! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

[S13Grl]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from chickenmanq on 8:31 pm on Nov. 13, 2001
Dude, put a Yugo emblem on it. ( I don't know, just thought it'd be funny.) <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> Once save a pos Chevy cavalier wagon with cadillac emblems.</td></tr></table><span id='postcolor'>

I'm Yugoslavian. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/mad.gif" border="0" valign="absmiddle" alt=':angry:'> And so is VancouverS14.

LOL, &nbsp;I'm not offended. Yugos are funky... definitely.

[transient]

That's what that stands for? Huh.... didn't know that.

Personally, I'd fill the holes and see what type of job I could do with touchup paint. If you're really good and you leave a little indentation where the filler is, you might be able to make a decent match.

[chickenmanq]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from S13Grl on 7:33 pm on Nov. 13, 2001
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from chickenmanq on 8:31 pm on Nov. 13, 2001
Dude, put a Yugo emblem on it. ( I don't know, just thought it'd be funny.) <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> Once save a pos Chevy cavalier wagon with cadillac emblems.</td></tr></table><span id='postcolor'>



I'm Yugoslavian. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/mad.gif" border="0" valign="absmiddle" alt=':angry:'> And so is VancouverS14.

LOL, I'm not offended. Yugos are funky... definitely.
</td></tr></table><span id='postcolor'>


K, that was funny as ####. &nbsp;I just had a good minute chuckle. &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

People have recommended using Goo Off for removing the leftover glue after taking off the emblems. Where do I find that stuff? So far I've looked in supermarkets and Home Depot and didn't find any.

[Kid Zelda]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from danio on 12:31 am on Nov. 14, 2001
People have recommended using Goo Off for removing the leftover glue after taking off the emblems. Where do I find that stuff? So far I've looked in supermarkets and Home Depot and didn't find any.</td></tr></table><span id='postcolor'>

Well, I found some at the home Depot I went to.
Try Ace Hardware....or a local mom&amp;pop lumber type store.

[matic 240sx]

on the inside of your hood... put tape to cover the whole (did this to my spoiler holes) &nbsp;then buy some touch up paint to match your car. &nbsp;get a pin (like a plastic pin you write with) if the wholes are small get one of those platic pins that are one solid piece and pull out the tip and ink stick thing.. &nbsp;and stick the tip in the whole and poor (SLOWLY) A SMALL BIT OF PAINT thru the other in of the pin... when it drys then poor on more to fill it in the rest of the way once you get it full and it has that little dome shape to it lay a piece of tape over it to flatten it out... &nbsp; my trunk came out great... and you can hardly tell there was ever 7 wholes there.. heh yea 7 i had a big heavy GT-R rip off spoiler

[gh6o6]

i literally ripped off that emblem from the dealer when i got my car because it looked stupid - i hate unneccary stuff. I just use lighter fluid. you just squirt it on the glue and rub with a cloth. whatever you use make sure you wax everything when your gone

(Edited by gh6o6 at 8:26 am on Nov. 14, 2001)

[S13Grl]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from chickenmanq on 9:34 pm on Nov. 13, 2001

K, that was funny as ####. I just had a good minute chuckle. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>
</td></tr></table><span id='postcolor'>

Hey, I'm glad I made ya laugh!!! I think I'd put a Yugo emblem on my car, but only because I'd get a kick out of it every time I see it. Also because I'm Yugoslavian. &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>
<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

[ca18guy]

Go with the spray painted black emblems. Black and gold offset nicely, and it's cheap.

how big are these holes?

[vancouvers14]

well, i can't really do any painting on the rear cause the emblem is on the lights. &nbsp;maybe i'll just fill the holes with some clear putty. &nbsp;

btw, the stuff i used to remove the goo was called 3M adhesive remover. &nbsp;works great, but kinda expensive. &nbsp;$38 cdn

[mistert]

$38 cdn? thats what, like 50 cents US?

[DSC]

LOL mistert, i think thats like $25 or so for us. &nbsp;I'm in the process of take my pinstrips off. &nbsp;I bought sap/tar remover from the local autoparts store to get the leftover glue off.

[vancouvers14]

i'd give away/sell the bottle, but i don't think it'd be legal to ship it cause its flammable and explosive

how big are the holes?

[misnomer]

I'm thinking satin black logos on a gold body would look #### fine

[samiam]

If you are a Nismo fan.....put a nice c.f. or black italisized Nismo emblem in place of the 240sx or se.

[gh6o6]

seriously try lighter fluid its like so cheep and you might even have some already

[S13Grl]

I say steal a gold Honda emblem off of an Accord and put it there.

<span style='font-size:10pt;line-height:100%'>NO</span>

Lighter fluid should take care of it. Also, see if you can find any golden vinyl material and cut out two little teeny-tiny dots and put them over the holes on your car. Seriously, that may not be such a bad solution either. Yeah, it won't look perfect, but it's easy to do and looks better than having two black holes.

<span style='font-size:31pt;line-height:100%'>how big are the holes?</span>

[Rcs476]

I spent an hour with a hair dryer and my fingers taking the double stick tape off that held the &quot;240SX&quot; badge on my 97. Got the rest off with a clay bar, some polishing compound, wax cleaner and then rewaxed it, came out NICE.
As for the holes..... hmmm, for the front, Just buy a CF hood. For the back, just try what everyone else said.

[BlankFlip]

oh i'm sorry nismos14, r u trying to ask something? <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

[vancouvers14]

the holes are about 1/8 inch each in diameter. i won't put a nismo emblem cause i don't have any nismo stuff, and i can't stand the look of cf hoods (and i haven't seen any cf hood that use stock latches).

my solutions:
-front red silvia emblem
-rear filled with clear putty, and taillights painted with semi-transparent red (or maybe black).

[vancouvers14]

btw, use an old credit card to get the glue off. &nbsp;its strong and won't scratch your paint. &nbsp;5 minutes, and your emblems will be off.

why did the holes show up? i dont get why thy would be there.... although i guess theres reasons for everything

[vancouvers14]

only the &quot;240sx&quot; and &quot;se&quot; emblems are stuck on. &nbsp;both front and rear &quot;nissan&quot; emblems are both glued and held in with small pins. &nbsp;the pins, unfortunately, go through the hood and taillights...

[my240likenoother]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from S13Grl on 8:21 pm on Nov. 13, 2001
Ohh, I'm so sorry! I thought your car was black!
Well... why don't you just get a Silvia Shield for the front, and completely remove them from the back?
</td></tr></table><span id='postcolor'>



than that would be &quot;rice&quot; LOL
i suprised that no1 picked up on that

[IceTekGuy]

DO YOU PEOPLE, NEGLECT the 1 million and 1 uses of rubbing alcohol?

ISOPROPYL RUBBING ALCOHOL!!!!!!! will take off anything sticky, even if its 20 year old adhesive...

ohh yea and its not Goo Off... its GOOF OFF and
GOO GONE...

dont use paint, on any holes that are in the metal, use fiberglass... it's the easiest stuff to work with, and it doesnt crack and chunk away, like paint and BONDO paint wont hold itself on the small thin ring of metal for long... use fiberglass and then sand it down nicely and paint it...
so much better than paint/bondo/filler/or tape at that matter...

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from IceTekGuy on 10:34 pm on Nov. 15, 2001
ohh yea and its not Goo Off... its GOOF OFF and
GOO GONE...</td></tr></table><span id='postcolor'>
Whoops. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

[vancouvers14]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from my240likenoother on 9:59 pm on Nov. 15, 2001
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from S13Grl on 8:21 pm on Nov. 13, 2001
Ohh, I'm so sorry! I thought your car was black!
Well... why don't you just get a Silvia Shield for the front, and completely remove them from the back?
</td></tr></table><span id='postcolor'>



than that would be &quot;rice&quot; LOL
i suprised that no1 picked up on that
</td></tr></table><span id='postcolor'>

my car's fast enough to back up the emblems, so i really care what anyone says. &nbsp;i don't have a turbo, and i don't really want one, but hey, it is a silvia chassis, i have japanese wheels, japanese exhaust, and often there are japanese girls in the passenger seat, so the japanese emblems aren't a problem for me.

[s14guy]

You should go W/ The black s14 shield in the front {it even has the holes in the right place . }and have the rears blacked out by a bodyshop (100-125$)with a large circle in the red-only section of the rear lights.The bodyshop can use a 50-50 split of clearcoat and black paint and it will still be transparent , and looks A LOT better w/o the factory orange and white!!!!!

The rear will be somewhat skylinesque!!!

(Edited by s14guy at 6:40 pm on Nov. 16, 2001)

[S13Grl]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from my240likenoother on 8:59 pm on Nov. 15, 2001
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from S13Grl on 8:21 pm on Nov. 13, 2001
Ohh, I'm so sorry! I thought your car was black!
Well... why don't you just get a Silvia Shield for the front, and completely remove them from the back?
</td></tr></table><span id='postcolor'>



than that would be &quot;rice&quot; LOL
i suprised that no1 picked up on that
</td></tr></table><span id='postcolor'>

See, being all-show and no-go is more ricey than that

<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'>.

And as Vancouver said, it is the Silvia Chassis.


_____________

Honey, his car is gold, I don't know how the rear would look blacked out on a gold car...

[matic 240sx]

s13grl, how do u figure using fiberglass on small drill holes is going to work? &nbsp;

[BlankFlip]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from my240likenoother on 9:59 pm on Nov. 15, 2001
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from S13Grl on 8:21 pm on Nov. 13, 2001
Ohh, I'm so sorry! I thought your car was black!
Well... why don't you just get a Silvia Shield for the front, and completely remove them from the back?
</td></tr></table><span id='postcolor'>

than that would be &quot;rice&quot; LOL
i suprised that no1 picked up on that
</td></tr></table><span id='postcolor'>

why the #### would that be rice, wtf?!? all &quot;silvia's&quot; aren't all turbocharged. there r silvia q's which don't have turbo in japan so is it ricey for nissan to do that w/ their stock cars? not tryin' to pick a fight n i'm not even mad. but i don't have no emblems on the rear of my car right now n i'd much rather have the car say silvia on it than 240sx cuz i'm so used to referring to our cars as silvia's (or 180sx's for h/b's) n i hate the name &quot;240sx&quot; for them here in the states or even 200sx. silvia just sounds and looks so much better.

[S13Grl]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from matic 240sx on 12:37 am on Nov. 18, 2001
s13grl, how do u figure using fiberglass on small drill holes is going to work?
</td></tr></table><span id='postcolor'>

I don't remember saying anything about fiberglass, automatic-driver!

<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> just kidding! but i've honestly not mentioned fiberglass. I said he should cover it with tiny dots of vinyl that match the color.

[KoukiS14]

Throw a Silvia S badge on your hood... &nbsp;That's all I have to say... Most people around here ask me what I drive.. some guy said &quot;What is this? &nbsp;A mitsubishi?&quot;
Still says Nissan on all my window glass, and 4 wheels... and on my tails... the Kouki tails aren't as easy to see the nissan badge tho.. small, and black.. works nice =)

Hey... I gotta green car... Anyone think that having my emblems painted by a body shop to match my car color would look good? &nbsp;Whether it be 240sx, 200sx or Silvia badging hehe..

-Rob

[BlankFlip]

i think it would be cool if it was a dark green n the emblems didn't stick out a whole lot, would be barely noticable, n i think that would be sweet.

[S13Grl]

You know what, black tails would actually look pretty nice. I saw a 300Z, gold with black tails--it looked sweet.

[vancouvers14]

i blacked out my taillights on saturday. &nbsp;looks really good. &nbsp;i might add a few more coats next weekend cause it could still be a bit darker. &nbsp;i should get the emblems any day now, and i'll probably get the silvia grille this week too. &nbsp;there's a couple on ebay. &nbsp;

only one problem:
do i put the rear silvia emblem where its supposed to go (on the left trunk lid) or do i put it in the middle of my taillights to cover the holes (which really aren't that noticeable since i painted them black, but i'm picky like that)

[S13Grl]

The emblem (that says Silvia in weird letters) you should put in the middle where the &quot;Nissan&quot; used to be. The shield you should put in the front.

Got any pics?

[vancouvers14]

i have pics of my car before i removed the emblems and blacked out the lights. &nbsp;where can i post them?

[S13Grl]

Post 'em here:

Put them up on a web server (<a href="www.webshots.com" target='_blank'>www.webshots.com</a>)
Get the URL of the picture
Reply in this post:
[ img ] url of the picture [ / img ]

You'll do this without spaces.

I don't know if you knew this or not, but I posted it up anyway.

[vancouvers14]

just got a webshots account. &nbsp;will post some pics tonight

[BlankFlip]

sweet, how exactly did u black out the lights?

[vancouvers14]

removed the 4 lights (left, middle, right, third brake). &nbsp;cleaned the car and lights with adhesive remover. &nbsp;gave them about 5 or 6 coats of vht nite shade, let em dry, re-install the lights with silicone sealant, and voila.

about 5 hrs. &nbsp;taking the lights off is a pain though. &nbsp;i've got cuts all over my hands cause of it.

[S13Grl]

Awesome. Lookin' forward to them!

[vancouvers14]

http://wsphotofews.excite.com/036/u7/NP/GK/Cf34649.jpg

[vancouvers14]

http://wsphotofews.excite.com/020/g2/jE/Ht/Ct56116.jpg&lt;br /&gt;
http://wsphotofews.excite.com/011/dV/Im/Ne/Cu51621.jpg&lt;br /&gt;
http://wsphotofews.excite.com/014/Qa/pu/SE/Cw94904.jpg

i figured i'd toss in a few other photos since you guys have never seen my car

[S13Grl]

Looks awesome! Good job!!!

[burgy240]

What is vht nite shade?

[vancouvers14]

its a semi-transparent paint. &nbsp;allows light to go through, but looks very dark when there is no light going through it

[burgy240]

Where can you get it and how much? I've seen this a few times and would like to do it myself. &nbsp;Also, did you paint your interior yourself? &nbsp;if so what did you use?

(Edited by burgy240 at 11:37 am on Nov. 20, 2001)

[vancouvers14]

any race shop should have it. &nbsp;as for the interior, if you do it, please don't do it in red. &nbsp;i like my unique look. &nbsp;took about $40 and 50 hrs of my time.

[burgy240]

don't worry reds not my thing! &nbsp;Thanks though. &nbsp;

[BlankFlip]

i'm gonna have my interior painted like a silver, at least that's what i plan on right now. i couldn't do that w/ the rear of my car though cuz the cops give tickets for having black out lights on the street. nice car though, what rims r those?

[S13Grl]

They shouldn't give you a ticket if the light is still visible. And Vancouver used the see-through paint.

[vancouvers14]

wheels are dronell d-power ts-05

the lights still shine really bright so you shouldn't have a problem. &nbsp;in fact, i think they're more noticeable now because of the contrast

[BlankFlip]

so is it the same as buying black out light covers for the tails? do they have those for our cars? i don't know if mine would look right like that cuz i've got a black car already, n i want black rims n a darker black tint on my back n side rear windows.

[vancouvers14]

i'ver never seen covers for a 240sx. &nbsp;this is a spray on.

[BlankFlip]

i think it looks a lot better on ur car then it ever would on mine just b/c it would be 2 much black n i like how the read looks on the back of my car neway. n what did u do for ur interior? just take everything right out then sprayed it? ne prepping or nething like that?

[vancouvers14]

took out every piece. &nbsp;cleaned then with acetone. &nbsp;light sanding with 400 grit. &nbsp;20 coats of vinyl paint (it streches and contracts with temp. changes). &nbsp;re-install. &nbsp;about 10-20 minutes between coats. &nbsp;and since you have everything taken apart, do a general vacuuming, cleaning.

[Tuck&Poke]

i say you buy the silvia emblems and put em on the front fenders a la' ferrari

[Tuck&Poke]

i wanna put carbon fiber on my dash and ad some red torino seats from sparco. &nbsp;thats about the only red im gonn have inside

Just to let you know, gold is one of the hardest colors to match and to paint.

[s14guy]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from BlankFlip on 3:45 pm on Nov. 20, 2001
i think it looks a lot better on ur car then it ever would on mine just b/c it would be 2 much black n i like how the read looks on the back of my car neway. n what did u do for ur interior? just take everything right out then sprayed it? ne prepping or nething like that?
</td></tr></table><span id='postcolor'>

My car is black , and I did the same as vanc. , only taped off a big red circle on each side (since my car is black, I wanted some red still showing) It looks #### good , and almost like a skyline . My girlfriend should be taking pics soon of the tail and the eyelids so you guys can see.

HEY Vancouver , I'm glad you took my advice , it looks Beeeeeautiful!!!

[S13Grl]

Yes, sir, I will sir!

<span style='font-size:7pt;line-height:100%'>hee, hee, hee</span>

[vancouvers14]

eeexxxxccellent...

[S13Grl]

I'll have the pics on Sunday...

[KoukiS14]

Hmm I like the tails in black.. got me thinkin =)
I like the red interior, but I'm wondering what it'd look like to paint the same parts you did on my car only have a bodyshop color match them to my green car? &nbsp;hmmm =) might look pirty good. .

As for the Silvia badges &quot;a la Ferrari&quot; . . I dunno. . they're curved to fit the hood. . 94-96 hood badges might fit a bit easier, they're smaller and a lil flatter. &nbsp;I've got a 94-96 green / gold emblem on my 97 hehe.. and another guy here has a 97-98 on his 96 haha. . ironic. .

-Rob

[AJ]

s14guy post up some pics of ur tails of the s14, i have an extra set of tails that i'm planning on customizing, and i'd love to c the look of yours, &nbsp;i was planning on taping off two circles, but i'd like to c how one looks, thanks. &nbsp;Also, do they make the paint in diff colors? &nbsp;i have a blue green (more blue) s14 ,, any thoughts on colors i should consider?

[S13Grl]

http://wsphotofews.excite.com/037/qj/su/fQ/zi92310.jpg

There's S14Guy's tailights.

[vancouvers14]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from KoukiS14 on 4:15 pm on Nov. 25, 2001
Hmm I like the tails in black.. got me thinkin =)
I like the red interior, but I'm wondering what it'd look like to paint the same parts you did on my car only have a bodyshop color match them to my green car? hmmm =) might look pirty good. . </td></tr></table><span id='postcolor'>

i was gonna match the pieces to my exterior color, but you can't just use regular paint, and i couldn't find the paint in gold. &nbsp;remember, you're painting on plastic and vinyl, and those pieces contract and expand with the temperature changes

[vancouvers14]

oh, ans s14guy/s13grl, did you forget to do the third brake light?

[AJ]

That looks awesome, btw, what kind of rims r those? and how much do they cost? i'm in love with them,, also are ur tails chipping at all?, did u use multiple coats?

[S13Grl]

http://www.wheelmax.com/Wheels/Giovanna/kyoto-sm.gif They're called Kyotos. On his car, they're gunmetal. Not sure how much they cost. He got them through a local shop, Driver's Image (http://www.driversimage.com). They look really dope in real life.

Mladen, he didn't do the third brake light on purpose, I think... I kinda like it that way too.