PDA

View Full Version : Carburetor thread


g6civcx
06-20-2008, 08:14 AM
I realize that not many people have carburetors, but if you have questions or comments, feel free to add to this thread.

Please don't turn this thread into a carb vs. fuel injection argument. Each has their own merits and if you dislike carbs, this thread is not for you. I personally prefer carbs for cost and ease of tuning, but that's a different discussion.



Good primer on how carbs work in general and how to tune most Edelbrock carbs: http://www.edelbrock.com/automotive_new/mc/carbs_acc/pdf/carb_owners_manual.pdf


Some of my thoughts:

For a street car, Edelbrock seems to be the best choice because they're tuned pretty good from the factory. Holleys may be better for WOT performance, but for normal street use Holleys can be a bit rougher than Edelbrocks.

Plus Edelbrocks have separate cruise and power modes and each is tunable independent of the other. It's like having VTEC kick in if you nail the gas :wiggle:

Upsides to Holley is that they do make more power when you run flat out, and the design is easier to rejet (built for the track), but running at anything less than 3/4 throttle you would probably want something else with smoother operation for daily use.

I don't have much experience outside of these two brands simply because they work so well and I don't have to look anywhere else. If someone has some thoughts on these or any other brand feel free to add.