S13 -> S14

[OfourTHREEfive]

I have a 96 s14 with a blown kade, if I get one out of a s13 as long as its a dual cam it will bolt right in including the wiring harness right? Thanks in advance guys.

[irax]

no, you need to pull the intake and exhaust off your old KA and be sure to use your old transmission. the intake and exhaust cams are different but I don't know much of a change it will make, also re use your dizzy

[OfourTHREEfive]

no, you need to pull the intake and exhaust off your old KA and be sure to use your old transmission. the intake and exhaust cams are different but I don't know much of a change it will make, also re use your dizzy
Thanks for the quick response, my only worry is the wiring harness, is it the same?

[irax]

if you change the stuff i mentioned you would not need to change the harness.

[OfourTHREEfive]

if you change the stuff i mentioned you would not need to change the harness.
Awsome, thanks for the help bro. Ill throw your rep up if i figure out how too lol.

[celica3sgte94]

make sure to change your disturbitur

[ak_slick]

If you are going s14-s13 KA, you just need to bolt up the block to the transmission and swap the distributor to your s14 ka style. I would recommend swapping the entire engine harness since you know yours is good. Then is should be a completely plug and play swap. Swap Harness plus distributor and then plug into your ecu. Should pretty much be a turn key swap.

I have done the opposite swap before, s14 ka for an s13 one and it worked just great, I used the s13 harness, ecu, and distributor and it fired up with no problems.

Good Luck to you Sir.

[irax]

I already answered it, no need for retype in different words :-D

[OfourTHREEfive]

I already answered it, no need for retype in different words :-D
Apparently he felt the need to lol.

Thanks anyway.