Kelford Godzirra S13 SR20DET Cams

[MA JasonG]

Kelfords breaking down doors with the introduction of his new race proven cams. Specializing in high performance Japanese enignes with the latest specsifications and developments. This is going to be new to hit the US Market with an estimated arrival time of 2 weeks. With the history of Subaru guys running these, theres no stop to Kelfords world domination in all type of motorsports.

http://www.kelford.co.nz/framegraphics/header.jpg


Kelford Cams new range of street and race track proven camshafts for S13 non NVCS SR20DET engines, Low seat to seat duration for fast spool ...Ultimate DRIFT designs.

SR20-DET S13 (Hydraulic lifter) TURBO, Mild street, suits boost increase, good midrange.
Cam Specs:
256 duration intake
264 duration exhaust$495 shipped (sold as set)

SR20-DET S13 (Hydraulic lifter) TURBO, Ultimate drift spec, Fast street, ECU & Turbo upgrade required.
Cam Specs:
264 Duration Intake
272 Duration Exhaust$495 shipped (sold as set)

[Brian]

Pink GodziRa cams?

[MA JasonG]

not quite, think bigger! Cosworth anyone??

[MA JasonG]

Just some specs on these cams.

S13 SR20DET 256/264
Approx. RPM Range

3000-7000Duration @ .006

Intake - 256
Exhaust - 264Duration @ .050

Intake - 198
Exhaust - 204Valve Lift @ 1.5

Intake - 10.50mm
Exhaust - 10.50mmCenterline @ Full Lift

Intake - 108
Exhaust - 112S13 SR20DET 264/272
Approx. RPM Range

3500-7500 Duration @ .006

Intake - 264
Exhaust - 272 Duration @ .050

Intake - 202
Exhaust - 208 Valve Lift @ 1.5

Intake - 11.00mm
Exhaust - 11.00mm Centerline @ Full Lift

Intake - 108
Exhaust - 112

[Z33dori]

ZOMG..... very awesome RPM range

these are perfect....

[projectdrifter]

any word on the 186-d cams? i have been contemplating them for months...

[MA JasonG]

I will check with them on it. Right now theres only a few things coming over but for Nissan related its just S13SR cams. If you want I can check availability there, and we can set up a special order.

[slideways2004]

i wish there were some s14 sr cams. any idea if they're going to make those?? do the 256/264 require upgraded springs/retainers?

[MA JasonG]

They do make cams for S14. Just non on their way yet. You dont need to upgrade springs/retainers but I suggest it.

[projectdrifter]

i may be intrested in the 186d cams.. it ssays they are for the fwd pulsar. if i have solid lifters will it fit the rwd. depending on price i may jump on this.

[Gearhead_42]

So if I'm reading right, these have slightly advanced timing when compared to the Greddy EASYCams, which otherwise are similar... intake 108 centerline vs 120 for the Greddy, and 112 vs. 114 on the exhaust side.

Marginally better top end then, with a little more overlap "lope" at idle


Or am I backwards again :loco:

[projectdrifter]

called today about cams no return call.

[MA JasonG]

called today about cams no return call.

I received your message at around 7pm. Was busy all day running around sorry. I did return your PM and honestly would have called you but calling after 7 is something id prefer not to do. I will call you tomorrow.