Ruckus-Racing 1jz/2jz mounts 240sx

[ruckus-racing]

Ruckus-Racing
s13/s14
1jz/2jz swap mounts
http://s85.photobucket.com/albums/k76/drift937/th_IMG_1587.jpg
these are our very own 1jzgte/2jzgte swap mounts for the s13 and s14240sx chassis. Our mount kit sets the engine as far back in the engine bay asa we could fit it without losing use of the heat core. Also we set the engine as low as possible for good hood clearance. We have made this kit to allow you to use your original 240sx rubber mounts. The transmission crossmember is made to use the R154 transmission.This kit includes two engine mounts, one transmission crossmember, and sway bar spacers(only needed in certain cases). Also drive shafts and wiring harness services are available upon request. The kit is made from high grade mild steel. 100% tig welded. We offer a limited lifetime warranty. dealer inquiries welcome.
price$350.00 +shipping
additioal info please contact
Ruckus-Racing.937-520-0284
http://s85.photobucket.com/albums/k76/drift937/th_IMG_1588.jpg
http://s85.photobucket.com/albums/k76/drift937/th_IMG_1589.jpg

[PITCH]

What kind of pricing for S14 wiring and driveshaft?

[GSXRJJordan]

Excellent!! Easy & cheap 1JZ mounting for S chassis! Please post basic price guidelines for wiring and driveshafts (with and without core exchange, if possible) so window shoppers can get an idea of what a 1JZ/2JZ swap will cost.

[ruckus-racing]

ok here you go.

wiring s13/s14 currently we do not offer A/C but we are working on it. but the price without A/C is $300.00 with a rough 2 week turn around time. with A/C when we get it all tested. it will be $350.00. this will get the car running. It does not include the adapters for the speedo or tach if you want them included its like around $140.00 for the two. check ebay to make sure.

driveshafts are $450.00 (best we can do). it is a one piece steel shaft with heavy duty yolks. holds upwards of 800hp. Thats what our supplier told me.

any other questions just let me know.

also we are working on a shifter extension should have it up for sale in about a week

[initial_drifter]

haha i'll be ordering a set after i pay off my bills :)

[soon2bs13]

awesome!!

finally someone stepping up to make it affordable for us tuners. i wish i had not bought my RB20!!

[LowNismo17]

just when i bail out of my S14 2jz project and buy a TT supra.. lol. If your parts are good quality items, then you are going to be a welding fool lol. your prices are awesome man

[k0uki]

sweet ill pick up a set when i get my motor

[BrandonFD3S]

Hmm.. interesting. Do you have any pictures of a 2JZ installed on a S14 using your kit to show how the 2jz sits with this setup? Very interested waiting on feedback and pictures.

[ruckus-racing]

i'll get pics soon. just a bit busy at the time. im layed up in bed at the time and have alot of welding to do to finish out the week

[Slidin240Wayz]

Can you post larger pictures and installed pictures and clearance pictures?

[ruckus-racing]

of course when i get back to the shop tommorrow morning

[driftking777]

have you solved the issues other companies are having with the speedometer? After installing my 2jz we cannot get the speedo to work? Does your 2jz swap have the working speedo?

[ruckus-racing]

yes the speedo will work but you have to buy the adapters we used the pheonix tunning adapters they are like $70 shipped from ebay

[((sr)) kelly]

WOW... amazing deal

[ruckus-racing]

thats what i said.lol

[mike_0678]

Fitment is good I've seen this setup in person.

[slw240sx]

Wiring will not be sold without 100% test. That is why a/c isnt a current option. I can easily make it work but I want it to work just like the factory does ie you hit the button idle jumps up, you go wot, a/c shuts off. I like to make 100% sure of something before I mention it. On paper everything is easy. Just like anyone with a romulator and live edit can tune. The exact devices to use will be listed with your harness or you can buy them from rucas if you don't mind paying a little extra for convience. THe harness will also come 100% in tact. there will only be clearly labled wires for installing the speedo and tach boxes. All wires will be loomed and plug into your car just like factory as long as the 240 harnesses you send in fit your car ie dont send an 89 auto harness if you own a 93 5 speed. Just like any company you will be charged for missing plugs, but fairly. You are missing a tps plug, you will not be charged $100. harness being hacked in half is another story, but I think that goes without saying.

This is Autotroniks posting under slw240sx's name.

[ruckus-racing]

so now everyone knows joel.lets all say hi.lol thanks man im not good at explaining wiring

[initial_drifter]

any close up pics of the mounts yet?

[0100]

Let's see some pictures. Love this stuff rb, 1jz, lsx, it's all good!

[slw240sx]

Ive also got a ls1 sitting here if anyone has a tranny :) We should be firing the car on the beta harness in the pm of tomorrow.

Joel

[slw240sx]

Excellent!! Easy & cheap 1JZ mounting for S chassis! Please post basic price guidelines for wiring and driveshafts (with and without core exchange, if possible) so window shoppers can get an idea of what a 1JZ/2JZ swap will cost.

Unfortunatly I can not release all of the work I have done for the harness.I found too many inconsistencies in writeups, so I did my own with schematics, the car and the harnesses. If you are good at wiring you can figure it out. I will say toyota and nissan do some things differently so you REALLY need to take circuit currents into account. If you buy the Ruckus/Autotroniks harness you will only need to know how to plug in a harness, turn a screwdriver to install the converters and get power to the starter. I highly suggest running a battery relocation and having the positive come through the firewall on the drivers side. I will work to accommodate any other battery setups. I also suggest in any walbro install running a dedicated relay and 12awg power straight from the battery. If desired I will offer this as an add on to the kit with the low current feed already coming out to run to the rear, relay, socket, and power wire. field any inquiries to cody and I will do my best to give you a clear answer. The harness will only be available int he non a/c variant for the next couple of weeks. Cost will be $300. You will need to send us your 240 upper and lower engine harnesses and your 1j harness. Make sure you have your 4th ecu plug for the 1j as it isnt attached to the main harness. I can source these if necessary. You will also need to buy the dakota boxes. these will be less than $200. As cody has said he has found them as low as $70 each. The harness will include part numbers and specific instructions.

Joel

[ruckus-racing]

http://i85.photobucket.com/albums/k76/drift937/IMG_1616.jpg
http://i85.photobucket.com/albums/k76/drift937/IMG_1619.jpg
http://i85.photobucket.com/albums/k76/drift937/IMG_1621.jpg
http://i85.photobucket.com/albums/k76/drift937/IMG_1622.jpg
http://i85.photobucket.com/albums/k76/drift937/IMG_1624.jpg
http://i85.photobucket.com/albums/k76/drift937/IMG_1626.jpg
http://i85.photobucket.com/albums/k76/drift937/IMG_1625.jpg

http://i85.photobucket.com/albums/k76/drift937/IMG_1628.jpg

[nasx]

Can you at guys Autotroniks do a harness for a 2JZGE (non turbo) into a 240sx swap?
How about a harness for a JDM S14 SR20DE (non turbo) to 2JZGE swap?

[nasx]

To Ruckus, Seeing that I have a built 2JZGE (NA-T) complete with harness and built auto trans could you sell me just the motor mounts, or could you make a tranny mount for the auto tranny?

[nasx]

also we are working on a shifter extension should have it up for sale in about a week

There is pretty good alternative. The parts are available special order from Carson Toyota for a total of $76 Your best bet is to stock these so folks can get them right away. I would pay an extra $30 just for the convenience.
here they are one more time:

$60 - Housing, Shifter (33521-24040)
$16 - Control Shift Lever (33570-24010)

http://forum.clubna-t.com/showthread.php?t=5655&highlight=shifter+extension

[ruckus-racing]

Can you at guys Autotroniks do a harness for a 2JZGE (non turbo) into a 240sx swap?
How about a harness for a JDM S14 SR20DE (non turbo) to 2JZGE swap?
yeh no problem.

[slideways2004]

There is pretty good alternative. The parts are available special order from Carson Toyota for a total of $76 Your best bet is to stock these so folks can get them right away. I would pay an extra $30 just for the convenience.
here they are one more time:

$60 - Housing, Shifter (33521-24040)
$16 - Control Shift Lever (33570-24010)

http://forum.clubna-t.com/showthread.php?t=5655&highlight=shifter+extension

yeah i read about those. how long is the wait for these?? a couple of weeks or days??

[initial_drifter]

i was just wondering but is your name brett?

[Deftec]

So can you give us a possible set price for everything?
Complete harness swap, with tach and speedo WORKING
A/C
etc?

I know you don't offer it as of yet, but I'd be willing to wait a few more weeks until it is available.

[slw240sx]

You are looking at about $520 for a basic harness+ a/c+ boxes that you dont have to mess with that has the charging system going to the factory pos terminal, you will need to supply a power feed to the starter. A few bucks will be saved if you get the boxes from ebay, Ill still give you setup instructions. As described in my other post there are other options for power and fuel pump that we will be glad to supply, even as far as an entire relocation kit preterminated for ease of install. These options are up to you but we offer them for those that arent as comfortable with wiring. Not trying to make a huge profit on them. just help those that want a one stop. Cody, Jon, and I are pooling together to try to get a package together with other options people will want like IC piping, drive shaft, fuel lines, a/c lines and slave cyl lines. Basicly if you desire it, it will be available for a fair price. The support will also be there to back it up. If desired, this kit could be so complete that any shop that can do a basic motor R&R could pull it off. BUt right now it is designed to save a DIY guy with good basic knowledge that doesnt have a fab shop some money.


The ruckas car has officially been started. Other peices of the puzzle will be added over the week to make sure the paperwork is correct. I hoping for donuts by friday.

[Deftec]

Yea, that'd be awesome man, I'm down to just IC Piping/radiator/hosing/wiring and I should be close to start. I have been buying through tech2 but if you guys get a good price going, I may hold out and wait.

[slw240sx]

Just keep in touch. I work full time on top of the harness gig so I do it the fastest i can do without compromising quality. Ill get a bit of a priority on the a/c. As for the other stuff. That could be taken care of sooner if desired. Cody Is on vacation this week so Ill do what I can to field the questions. If you want, PM jon,(this screen name) with everything you want and we'll get you a price. I can give you a call tomorrow around 5 too. We look forward to helping make your build a success.

[ruckus-racing]

although i am on vacation i will still be taking erything work care of all of my buisness. please do not hesitate to call 937-520-0284 or p.m me on here i will get everything worked out for you

[slw240sx]

sweet. didnt know you had the net there :)

Joel

[nasx]

updates on the ruckas car??

[slw240sx]

yeah some, its running and melting the 265s that are mounted on its 18x10 wheels lol. im sure he will post up some video and pictures when he has a little free time.


Jon

[yingiang]

bump for update.

[TEALSQUEAL]

what is the max power output on this set-up and longevity seen so far?

[ByeByeSti]

wow this sucks, i just bought an sr20det the other day cuzi gave up all hope of doing a 2jz swap cuz i didnt feel like doing the wiring or brackets.. and now here are both! buy this shit up people, great prices, andlooks to be great fitment!!!

[slw240sx]

well he had a stock turbo crap out a few days ago, and the first drift event of the year we are throwing is Sunday so he threw together a quick log adapter to run a single t3/t4 externally gated setup, so far motor is holding up fine and sounds great, with the single turbo hes going to have to start looking into fuel management

Jon

[sileight_04]

Do you guys offer the same products and wiring services for a 2JZGTE swap? basically everything needed except for the motor, trans, and labor. let me know cause i am interested in starting this swap soon.

[slw240sx]

Yes. Ruckus does offer this.

[WideBoyS14]

Hi, do you reckon you could make a loom for a UK S14a SR20det for a 1JZ from a soarer (jap import)?? if so how much?

awesome work btw!

[sileight_04]

how about a 2jzgte with vvti ?

[slw240sx]

current pricing is as follows
s13 or s14 1 or 2jz $325 a/c add $25 vvti is not an issue and there is no additional charge.

There are other options that can be discussed such as interated fan control and battery relocation kit with all wiring to power your jz, and a junction box setup included. The Dakota boxes can be purchases elseware or from us for more if you just want a one shot deal. I can also do fuel pump direct wire setups to give your walbro the sufficient power it deserves.

Joel

rhd and non standard lhd setups may be more depending on how off they are but usually there is no added cost.

[otaku64]

PM sent.

Thanks!

- sal campo

[otaku64]

We'd like to order the 1JZ mounts and driveshaft for an S13. Please contact when you have the chance.

Thank you.

- sal campo

[thinhthan]

hey do you guys still make harnesses