PDA

View Full Version : trans wiring / ground help please


jakethesnake
11-28-2007, 11:03 PM
im doing an SR20DET swap and im in the process of doing my trans,alternator,starter wiring..i got the starter all wired up and the alternator..but a few of my clips that go to my tranny are cut, does anyone know where i can find a diagram or a color code to match up some of the clips

and just checking...how many grounds should i have on my motor?
what are all the things i should ground?

motorsnail
11-28-2007, 11:11 PM
http://www.frsport.com/sr20det-swap-engine-harness-wiring-guide-sr20-p-665.html

jakethesnake
11-28-2007, 11:14 PM
i need trans wiring not motor...its 2 different harnesses, thanks tho

motorsnail
11-28-2007, 11:17 PM
Should be matching colors then because you dont switch the clips on the harness you switch them on the tranny. If its pulled out of the clips with no access wire look at it in the FSM.

jakethesnake
11-29-2007, 09:01 AM
when your doing the harness conversion, you dont have to do anything to the tranny... my wiring is just all cut down by the tranny so idk what to do

motorsnail
11-29-2007, 09:23 AM
when your doing the harness conversion, you dont have to do anything to the tranny... my wiring is just all cut down by the tranny so idk what to do

Yeah look in the Factory sercive manual should have what wire goes where. Wiring is a bitch unless you have rewired a 240sx before gonna have to do research or get a new lower harness. FYI best bet would prolly be a junk yard.