trans wiring / ground help please - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jakethesnake · 11-28-2007, 11:03 PM

im doing an SR20DET swap and im in the process of doing my trans,alternator,starter wiring..i got the starter all wired up and the alternator..but a few of my clips that go to my tranny are cut, does anyone know where i can find a diagram or a color code to match up some of the clips

and just checking...how many grounds should i have on my motor?
what are all the things i should ground?

motorsnail · 11-28-2007, 11:11 PM

http://www.frsport.com/sr20det-swap-...r20-p-665.html

jakethesnake · 11-28-2007, 11:14 PM

i need trans wiring not motor...its 2 different harnesses, thanks tho

motorsnail · 11-28-2007, 11:17 PM

Should be matching colors then because you dont switch the clips on the harness you switch them on the tranny. If its pulled out of the clips with no access wire look at it in the FSM.

jakethesnake · 11-29-2007, 09:01 AM

when your doing the harness conversion, you dont have to do anything to the tranny... my wiring is just all cut down by the tranny so idk what to do

motorsnail · 11-29-2007, 09:23 AM

Quote:

Originally Posted by jakethesnake

when your doing the harness conversion, you dont have to do anything to the tranny... my wiring is just all cut down by the tranny so idk what to do

Yeah look in the Factory sercive manual should have what wire goes where. Wiring is a bitch unless you have rewired a 240sx before gonna have to do research or get a new lower harness. FYI best bet would prolly be a junk yard.

11-28-2007, 11:03 PM	#1
jakethesnake Zilvia Member Join Date: Oct 2007 Location: somewhere Posts: 205 Trader Rating: (0) Feedback Score: 0 reviews	trans wiring / ground help please im doing an SR20DET swap and im in the process of doing my trans,alternator,starter wiring..i got the starter all wired up and the alternator..but a few of my clips that go to my tranny are cut, does anyone know where i can find a diagram or a color code to match up some of the clips and just checking...how many grounds should i have on my motor? what are all the things i should ground?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-28-2007, 11:11 PM	#2
motorsnail Zilvia Addict Join Date: Jun 2007 Location: Oklahoma Age: 33 Posts: 625 Trader Rating: (0) Feedback Score: 0 reviews	http://www.frsport.com/sr20det-swap-...r20-p-665.html

11-28-2007, 11:14 PM	#3
jakethesnake Zilvia Member Join Date: Oct 2007 Location: somewhere Posts: 205 Trader Rating: (0) Feedback Score: 0 reviews	i need trans wiring not motor...its 2 different harnesses, thanks tho

11-28-2007, 11:17 PM	#4
motorsnail Zilvia Addict Join Date: Jun 2007 Location: Oklahoma Age: 33 Posts: 625 Trader Rating: (0) Feedback Score: 0 reviews	Should be matching colors then because you dont switch the clips on the harness you switch them on the tranny. If its pulled out of the clips with no access wire look at it in the FSM.

11-29-2007, 09:01 AM	#5
jakethesnake Zilvia Member Join Date: Oct 2007 Location: somewhere Posts: 205 Trader Rating: (0) Feedback Score: 0 reviews	when your doing the harness conversion, you dont have to do anything to the tranny... my wiring is just all cut down by the tranny so idk what to do