View Full Version : i changed my valvecover gasket and now the car is messed up
civilized_drifter
04-14-2007, 02:55 PM
so i took the valve cover off my sohc and replaced the gasket tightend(spelling) everything down and started the car and it started shakeing really bad and it sounds like the timing is off, i didnt touch the cam, timing chain, or anything, the sparkplug wires have a good conection and i have no idea what could be wrong
motonagam
04-14-2007, 08:28 PM
did you remember to reconnect vacuum lines that you may have disconnected, or accidently knocked off?
InspireMS
04-14-2007, 08:32 PM
did you torque everything back together accordingly to the factory specifications?
viperbite
04-14-2007, 08:35 PM
shakin...
thats really weird...
hmm
i really dont know what it could be
double check to make sure you put the wires in the right holes for the spark plugs...
jkjunior
04-14-2007, 08:39 PM
ya def could be a losse plug wire or like viperbite said in the wrong holes
Dutchmalmiss
04-14-2007, 09:31 PM
+1 for plug wires and vacuum lines
civilized_drifter
04-14-2007, 10:16 PM
all spark plug wires are in correctly, the hose that goes from the valve cover to the intake manifold was cracked so i duck taped it and it was still doing it. i didn't pull any vacuum lines out,could there be any on the back that i cant see that could cause this?
twofortyrida1388
04-14-2007, 10:33 PM
Sure you didn't drop anything inside. If you did cams could be eatin it up and preventing them to do their proper job causing some intake and exhaust timing problems.
civilized_drifter
04-15-2007, 11:18 AM
im shure i didnt drop anything onto the cams
HIGHMILEHATCH
04-15-2007, 12:24 PM
If it's shaking like you say, thats typically only running on less than all four cylinders. You probably don't have one of the plug wires in the right order, or it's just not on at all.
chmercer
04-15-2007, 01:06 PM
im guessing the center vc gasket is messed up or installed wrong and 1 or more spark plug holes are filled with motor oil
viperbite
04-15-2007, 07:20 PM
im guessing the center vc gasket is messed up or installed wrong and 1 or more spark plug holes are filled with motor oil
this is also very very possible
maybe damaged when removed?
if you remove it too fast then it could do that
civilized_drifter
04-15-2007, 07:23 PM
i didnt unplug any sparkplug wires and tomarro im goin to the junkyard to get that hose peice, when i get home from school i'll check the sparkplugs and replace them if needed. if it is still doing it im gonna bring it up to nissan where my friend works and he can figure it out, if he cant fix it it wi'll be time to finally swap to a ka24de. i'll check back tomarro on what happens
viperbite- it took a while to take the valve cover off cause it got hooked on to some wires
viperbite
04-15-2007, 07:25 PM
i didnt unplug any sparkplug wires and tomarro im goin to the junkyard to get that hose peice, when i get home from school i'll check the sparkplugs and replace them if needed. if it is still doing it im gonna bring it up to nissan where my friend works and he can figure it out, if he cant fix it it wi'll be time to finally swap to a ka24de. i'll check back tomarro on what happens
oh... didnt know it was an sohc...
i donno much about them then...
did a fan blade break off? lol maybe? haha i dunno
drive that thing SLOOOW lol
civilized_drifter - yah i meant like if you pulled on it real quik or something... or used a screw driver to pop it off
i dunno man have your friend check it out... i dont think its that intake hose cuz you can leave that off and nothing will happen lol cept some dirt in the chamber
driftenthusiast
04-15-2007, 08:06 PM
just pull wires and see with cylinder isnt running, then see if that one has spark.
civilized_drifter
04-15-2007, 09:14 PM
i just took the hose off from the valve cover an the thing it conects to on the cover poped out..is that a good thing?
viperbite
04-15-2007, 09:22 PM
i just took the hose off from the valve cover an the thing it conects to on the cover poped out..is that a good thing?
it really doesnt matter
you can put a breather filter on that hose and it would be fine...
i dont think thats the issue ...
civilized_drifter
04-15-2007, 10:14 PM
ya, i just wasnt expecting that thing to pull out when i did it
chmercer
04-15-2007, 10:50 PM
no it dosent matter
if you really want you can like jb weld it back in or something
LB.Motoring
04-15-2007, 11:15 PM
Check your injector wiring..
civilized_drifter
04-20-2007, 11:28 PM
so i got my car running right again, i changed the distributor cap, spark plug wires and sparkplugs....that didn't work, so my dad starts hitting stuff and it runs perfect..WTF!?!?! it turned out that my EGR valve was cloged up and by hitting it it losened the clog up and it runs perfect. thank you guys for all your help
69datsun510
04-21-2007, 01:09 AM
Don't you just hate it when your Dad shows ya up!! LOL I have a son 17, he just hates that!! Glad you got it fixed. You have now learned how to fix your car or buddies car should it happen again.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.