Sr20det grounding points - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Hotmessxpress · 08-13-2019, 08:41 AM

Does anyone have a ground wire diagram for the blacktop sr20det?
And where is the main ECU ground point on the engine?

*brndck* · 08-13-2019, 09:11 AM

ecu ground point on the engine???

wat?

google has plenty of wiring pinouts for the blacktop sr20, ground shit where ever, just make sure it has good connection directly to metal, you can't really have TOO many grounds

duballstar37 · 08-15-2019, 09:14 AM

Edit: F-Photobucket

crash n' burn · 08-16-2019, 11:17 AM

The ECU ground(s) is incorporated in the common ground that runs through the entire engine harness (multiple ground wires feed into it). The actual grounding point for all of them are the 2 eyelets that are bolted on to the #3 intake runner. Then it completes the circuit to the chassis via the 2 main engine>chassis grounds located off the front of the intake manifold and the rear of the head.

Hotmessxpress · 08-16-2019, 11:51 AM

Quote:

Originally Posted by crash n' burn

The ECU ground(s) is incorporated in the common ground that runs through the entire engine harness (multiple ground wires feed into it). The actual grounding point for all of them are the 2 eyelets that are bolted on to the #3 intake runner. Then it completes the circuit to the chassis via the 2 main engine>chassis grounds located off the front of the intake manifold and the rear of the head.

Thank you sir. That was the answer I was looking for. I was just hoping to find an actual diagram or schematic showing all the ground wire connections. Other cars have this.
Thanks again man.

08-13-2019, 08:41 AM	#1
Hotmessxpress Join Date: Aug 2019 Location: Ocala FL Age: 46 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	Sr20det grounding points Does anyone have a ground wire diagram for the blacktop sr20det? And where is the main ECU ground point on the engine?

08-16-2019, 11:17 AM	#4
crash n' burn Zilvia Junkie Join Date: Sep 2012 Location: Colorado Age: 32 Posts: 506 Trader Rating: (11) Feedback Score: 11 reviews	The ECU ground(s) is incorporated in the common ground that runs through the entire engine harness (multiple ground wires feed into it). The actual grounding point for all of them are the 2 eyelets that are bolted on to the #3 intake runner. Then it completes the circuit to the chassis via the 2 main engine>chassis grounds located off the front of the intake manifold and the rear of the head. __________________ @jz_2tone

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-15-2019, 09:14 AM	#3
duballstar37 Zilvia Junkie Join Date: Aug 2007 Location: Eastbound and Down Posts: 490 Trader Rating: (10) Feedback Score: 10 reviews	Edit: F-Photobucket __________________ P.A.T.T. Last edited by duballstar37; 10-08-2019 at 01:13 PM..