E30 SR20det swap Thailand drift build - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

tunermt · 04-24-2012, 10:50 PM

Update, went out for Midnight cruise through Bangkok with some friends in their wild rides.

Also go to do some skids in the car and damn this thing is twitchy with 265's and such a short wheel base!

Update, practicing launching in the car has been fun.

Finally got around to snapping a few pictures of my project out here in Bangkok.
Check out the Blog for details and a little write up. Flex Fuel SR20det swap BMW E30

I will try and keep it to mostly pictures and video here on the forum

Of course please feel free to ask any questions, always happy to help out if possible.

Super short build list: BIG thanks to Alex at Brewed Motorsports for getting all my parts safely shipped in one package to Thailand!

2dr E30
s14 SR20det
AEM Infinity 508 Flex Fuel tuning
ID1000cc injectors
O44 bosch fuel pump
E85 ~25-30psi on the S15 turbo **buddy gave me an evo 8 turbo so i used that over the gt28**
BC sports coilovers 8k front
E36 rack
E46 front control arms
Sparco seat
Complete E34 subframe
Rear coilover conversion 6k springs

Coming from the states where i have every tool imaginable at my finger tips this little project is tacking me back to my roots!

I am still waiting on most of the parts to get this thing finished up and on the road. But here are a couple things that have already arrived

The Big package of electronics and fuel parts from Brewed should be arriving in about 5 days. Just hope customs doesn't rape me on this one!

rgztmalv · 04-25-2012, 10:47 AM

Looks like it's gonna be a pretty sick project.

SR20Driftking4lyf · 04-25-2012, 11:07 AM

25-30psi on an S15 turbo?

ralphandthequeen · 04-25-2012, 11:18 AM

i miss Thailand.. so much fun. and looks like a nice ride. keep updating!

tunermt · 04-25-2012, 10:57 PM

Quote:

Originally Posted by SR20Driftking4lyf

25-30psi on an S15 turbo?

It will make the boost and good power in the mid range however I will need to taper the boost down to ~20 by redline.
(this set up makes for a FAT torque curve on a little SR20, very nice for sliding)

Oh and a pic of the wheels i'm leaning towards at the moment, 16x9 20mm will more than likely still need some spacers though.

onehundredoctane · 04-26-2012, 04:43 AM

Do work eric!

jr_ss · 04-26-2012, 05:23 AM

I'd request this get moved otherwise lock down I foresee... A lot of people swapping SR's into BMW's lately.

keeeban · 04-26-2012, 04:34 PM

the things I would do to have a place like that.

tunermt · 04-26-2012, 10:26 PM

Thanks for the kind words guys, i was planning to have some updates and be driving a bit by now but BC Sports Thailand just told me yet another few days until my 51mm front lower coilover mounts clear customs...

tunermt · 06-09-2012, 01:56 AM

Well the post office finally got me the big box of treats Brewed Motors sent out 2 months ago!

Just yanked out the S14 SR engine harness and started labeling/cleaning things up in preparation for the AEM EMS install and tuning.
Pictures of the finished harness coming soon.

All cleaned up

KravingAKouki · 06-10-2012, 01:57 PM

Quote:

Originally Posted by keeeban

the things I would do to have a place like that.

haha yea i totally agree. but if i had a place that big id want a lift knowing id have the room. jacks and jack stands are such a pita sometimes

tunermt · 06-11-2012, 08:35 AM

Haha the car was on jack stands 10ft I'm front of a lift that no longer worked. That shop is about 300 meters from my apartment and was a body shop that closed after the terrible floods out here last year. The owner is super nice and offered me space to tinker with the car until the new location in Bangkok is ready.

future · 06-11-2012, 08:44 AM

So a s15 can do 25-30lbs now? Thats something new

Sileighty_85 · 06-11-2012, 11:50 AM

Quote:

Originally Posted by tunermt

It will make the boost and good power in the mid range however I will need to taper the boost down to ~20 by redline.
(this set up makes for a FAT torque curve on a little SR20, very nice for sliding)

I would like vids of a OEM S15 T28 boosting 30psi.

Then an update of said turbo after 3 events.

tunermt · 06-12-2012, 12:52 AM

remember my friends 25-30psi will only be in the mid range, to remain "safe" tapering the boost back down to the 20psi range by red line is a must.

For example (RUFF example don't quote these #s they are just an example, stock SR with S15 turbo) at say 4500 rpm and 20psi the shaft speed would be ~100k rpm but by 7k eng rpm and 20psi the shaft speed will increase to ~130k rpm (engine is moving more air the turbo must work harder to keep up)

At 4500 eng rpm and ~28psi the shaft speed will be ~130k rpm, by tapering the boost back down to ~20psi by 7k eng rpm you can maintain a similar/safe shaft speed. As apposed to forcing ~28psi at 7k eng rpm causing the shaft speed to sky rocket to 150-200K rpm + of course trying to hold to much boost all the way to redline with a small turbo will also cause intake temps to sky rocket

Don't get me wrong this is not easy on a turbo but if you keep a close eye on everything and don't get greedy it is a great way to make some extra torque as long as your fuel can support it. (high octane to avoid detonation)
Unfortunately i will not have a shaft speed sensor on this turbo to show you all exact #s but this should give you an idea.
I will however be happy to post up AIT, boost, rpm data to help shed some light on this.

Don't get me wrong this is not gods gift to tuning small turbos but it does work quite well its just a matter of finding the "sweet spot" which very well may be 25psi tapered to 18psi.

haha notice i did say 25-30 yet 30 is the only # anyone repeats

Sileighty_85 · 06-12-2012, 08:20 AM

I dont know if you know something we dont know, but the max power and boost that turbo can put out safely and reliable is 300ish hp at 16psi.

anything past 16 is past its efficient range and it will grenade. I know this because Ive had friends that have been tuned and ran that turbo at 18-19 psi and the bearings shit themselves. then another one that his boost controller crapped out and was running 21-23 psi and after a 3 weeks was a substantial increase in shaft play.

future · 06-12-2012, 08:41 AM

Yeah there is no way it will make that much boost.

cbcm2435 · 06-12-2012, 08:53 PM

i trust that eric knows what he is talking about. he tuned my car, and i run 18-19psi on my t28 daily for probably 6-7 months now, including a 1500 mile trip when i moved to PA. and i checked my turbo the other day while i had it off and its still good to go.

Sileighty_85 · 06-13-2012, 12:20 AM

Quote:

Originally Posted by cbcm2435

i trust that eric knows what he is talking about. he tuned my car, and i run 18-19psi on my t28 daily for probably 6-7 months now, including a 1500 mile trip when i moved to PA. and i checked my turbo the other day while i had it off and its still good to go.

DD and 1500 mile trips don't mean anything, you're not straining that turbo driving at 2,000 RPM in Vac, unless your running full boost the whole way.

Drifting/tracking a is different story.

tunermt · 06-14-2012, 08:12 PM

No worries guys i'll post up details and results, haha i'll be throwing some anti lag at this turbo as well to help make sure it lasts forever

tunermt · 07-27-2012, 05:58 AM

Couldn't find an electric shop ANYWHERE in my area (near Bangkok) that had what i needed... or even understood what i needed haha, SO I cannibalized the old gauge cluster i wont be using.
Didn't find the 100 ohm resister that i needed but i did score a 70 ohm and a 30 ohm bing bang boom soldered inline =100 ohm resister!

onehundredoctane · 07-27-2012, 08:58 AM

Is the resistor added to calibrate the speedo?

tunermt · 07-28-2012, 07:42 AM

no i pulled the resistors out of the old BMW gauge cluster (my dash will consist of 1 AEM serial gauge, shift/rpm lights and MAYBE a tach)

The Alternator has power, ground, and a 2 pin connector (voltage sensor wire and the wire that runs to the dash warning light).
I don't have the nissan dash or warning light/led from the dash so i had to use a 100 ohm resistor for this wire before the Alt would start to put out any voltage.

tunermt · 07-29-2012, 01:23 AM

So preliminary tuning, just giving the map a bit more head room for some extra boost and RPM

ShadowMan · 07-29-2012, 05:14 PM

Coming along nciely Eric. Can't wait to see it in action.

Nismo11 · 07-29-2012, 10:14 PM

Sick project bro!

tunermt · 07-30-2012, 02:06 AM

some more goodies from America

Was planning to finish up the front half of the chassis wiring harness today but to damn busy with a few E-Tunes.

tunermt · 07-31-2012, 04:38 AM

Fuse box and start switch all wired in and mounted on top of a little sticker bomb action

tunermt · 08-01-2012, 09:13 AM

pulled apart the front half of the chassis harness to make sure the engine bay won't be cluttered up by anything i don't want to look at haha

h2v7 · 08-01-2012, 10:49 AM

e30 love do it

04-24-2012, 10:50 PM	#1
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	E30 SR20det swap Thailand drift build Update, went out for Midnight cruise through Bangkok with some friends in their wild rides. Also go to do some skids in the car and damn this thing is twitchy with 265's and such a short wheel base! Update, practicing launching in the car has been fun. Finally got around to snapping a few pictures of my project out here in Bangkok. Check out the Blog for details and a little write up. Flex Fuel SR20det swap BMW E30 I will try and keep it to mostly pictures and video here on the forum Of course please feel free to ask any questions, always happy to help out if possible. Super short build list: BIG thanks to Alex at Brewed Motorsports for getting all my parts safely shipped in one package to Thailand! 2dr E30 s14 SR20det AEM Infinity 508 Flex Fuel tuning ID1000cc injectors O44 bosch fuel pump E85 ~25-30psi on the S15 turbo buddy gave me an evo 8 turbo so i used that over the gt28 BC sports coilovers 8k front E36 rack E46 front control arms Sparco seat Complete E34 subframe Rear coilover conversion 6k springs Coming from the states where i have every tool imaginable at my finger tips this little project is tacking me back to my roots! I am still waiting on most of the parts to get this thing finished up and on the road. But here are a couple things that have already arrived The Big package of electronics and fuel parts from Brewed should be arriving in about 5 days. Just hope customs doesn't rape me on this one! __________________ Brewed Motors IG @Brewedmotors Last edited by tunermt; 05-19-2021 at 01:08 AM..

04-25-2012, 11:18 AM	#4
ralphandthequeen Zilvia Member Join Date: Dec 2011 Location: 29 sticks Age: 32 Posts: 226 Trader Rating: (0) Feedback Score: 0 reviews	i miss Thailand.. so much fun. and looks like a nice ride. keep updating! __________________ "r32s are rear drive bro."

04-26-2012, 05:23 AM	#7
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,056 Trader Rating: (34) Feedback Score: 34 reviews	I'd request this get moved otherwise lock down I foresee... A lot of people swapping SR's into BMW's lately. __________________ My SR20VET

04-26-2012, 04:34 PM	#8
keeeban Zilvia Addict Join Date: Apr 2010 Location: Bay Area, CA Age: 28 Posts: 924 Trader Rating: (22) Feedback Score: 22 reviews	the things I would do to have a place like that. __________________

04-26-2012, 10:26 PM	#9
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	Thanks for the kind words guys, i was planning to have some updates and be driving a bit by now but BC Sports Thailand just told me yet another few days until my 51mm front lower coilover mounts clear customs... __________________ Brewed Motors IG @Brewedmotors

04-25-2012, 10:47 AM	#2
rgztmalv Leaky Injector Join Date: Apr 2012 Location: Oahu Age: 32 Posts: 101 Trader Rating: (0) Feedback Score: 0 reviews	Looks like it's gonna be a pretty sick project.

04-25-2012, 11:07 AM	#3
SR20Driftking4lyf Leaky Injector Join Date: Oct 2005 Location: Florida Posts: 66 Trader Rating: (0) Feedback Score: 0 reviews	25-30psi on an S15 turbo?

04-26-2012, 04:43 AM	#6
onehundredoctane Post Whore! Join Date: Oct 2006 Location: Greensborough, NC Posts: 2,783 Trader Rating: (3) Feedback Score: 3 reviews	Do work eric!

06-09-2012, 01:56 AM	#10
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	Well the post office finally got me the big box of treats Brewed Motors sent out 2 months ago! Just yanked out the S14 SR engine harness and started labeling/cleaning things up in preparation for the AEM EMS install and tuning. Pictures of the finished harness coming soon. All cleaned up __________________ Brewed Motors IG @Brewedmotors Last edited by tunermt; 08-02-2012 at 09:35 AM..

06-11-2012, 08:35 AM	#12
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	Haha the car was on jack stands 10ft I'm front of a lift that no longer worked. That shop is about 300 meters from my apartment and was a body shop that closed after the terrible floods out here last year. The owner is super nice and offered me space to tinker with the car until the new location in Bangkok is ready. __________________ Brewed Motors IG @Brewedmotors

06-12-2012, 12:52 AM	#15
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	remember my friends 25-30psi will only be in the mid range, to remain "safe" tapering the boost back down to the 20psi range by red line is a must. For example (RUFF example don't quote these #s they are just an example, stock SR with S15 turbo) at say 4500 rpm and 20psi the shaft speed would be ~100k rpm but by 7k eng rpm and 20psi the shaft speed will increase to ~130k rpm (engine is moving more air the turbo must work harder to keep up) At 4500 eng rpm and ~28psi the shaft speed will be ~130k rpm, by tapering the boost back down to ~20psi by 7k eng rpm you can maintain a similar/safe shaft speed. As apposed to forcing ~28psi at 7k eng rpm causing the shaft speed to sky rocket to 150-200K rpm + of course trying to hold to much boost all the way to redline with a small turbo will also cause intake temps to sky rocket Don't get me wrong this is not easy on a turbo but if you keep a close eye on everything and don't get greedy it is a great way to make some extra torque as long as your fuel can support it. (high octane to avoid detonation) Unfortunately i will not have a shaft speed sensor on this turbo to show you all exact #s but this should give you an idea. I will however be happy to post up AIT, boost, rpm data to help shed some light on this. Don't get me wrong this is not gods gift to tuning small turbos but it does work quite well its just a matter of finding the "sweet spot" which very well may be 25psi tapered to 18psi. haha notice i did say 25-30 yet 30 is the only # anyone repeats __________________ Brewed Motors IG @Brewedmotors

06-12-2012, 08:20 AM	#16
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	I dont know if you know something we dont know, but the max power and boost that turbo can put out safely and reliable is 300ish hp at 16psi. anything past 16 is past its efficient range and it will grenade. I know this because Ive had friends that have been tuned and ran that turbo at 18-19 psi and the bearings shit themselves. then another one that his boost controller crapped out and was running 21-23 psi and after a 3 weeks was a substantial increase in shaft play. __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

06-12-2012, 08:53 PM	#18
cbcm2435 Zilvia Junkie Join Date: May 2009 Location: Illinois Age: 30 Posts: 351 Trader Rating: (0) Feedback Score: 0 reviews	i trust that eric knows what he is talking about. he tuned my car, and i run 18-19psi on my t28 daily for probably 6-7 months now, including a 1500 mile trip when i moved to PA. and i checked my turbo the other day while i had it off and its still good to go.

06-14-2012, 08:12 PM	#20
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	No worries guys i'll post up details and results, haha i'll be throwing some anti lag at this turbo as well to help make sure it lasts forever __________________ Brewed Motors IG @Brewedmotors

07-27-2012, 05:58 AM	#21
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	Couldn't find an electric shop ANYWHERE in my area (near Bangkok) that had what i needed... or even understood what i needed haha, SO I cannibalized the old gauge cluster i wont be using. Didn't find the 100 ohm resister that i needed but i did score a 70 ohm and a 30 ohm bing bang boom soldered inline =100 ohm resister! __________________ Brewed Motors IG @Brewedmotors Last edited by tunermt; 07-28-2012 at 08:06 AM..

07-27-2012, 08:58 AM	#22
onehundredoctane Post Whore! Join Date: Oct 2006 Location: Greensborough, NC Posts: 2,783 Trader Rating: (3) Feedback Score: 3 reviews	Is the resistor added to calibrate the speedo?

07-28-2012, 07:42 AM	#23
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	no i pulled the resistors out of the old BMW gauge cluster (my dash will consist of 1 AEM serial gauge, shift/rpm lights and MAYBE a tach) The Alternator has power, ground, and a 2 pin connector (voltage sensor wire and the wire that runs to the dash warning light). I don't have the nissan dash or warning light/led from the dash so i had to use a 100 ohm resistor for this wire before the Alt would start to put out any voltage. __________________ Brewed Motors IG @Brewedmotors

07-29-2012, 01:23 AM	#24
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	So preliminary tuning, just giving the map a bit more head room for some extra boost and RPM __________________ Brewed Motors IG @Brewedmotors

07-29-2012, 05:14 PM	#25
ShadowMan Zilvia Junkie Join Date: Jul 2011 Location: oceanside, CA. Posts: 538 Trader Rating: (4) Feedback Score: 4 reviews	Coming along nciely Eric. Can't wait to see it in action. __________________ in any situation....thou shalt blaze

07-29-2012, 10:14 PM	#26
Nismo11 Zilvia Addict Join Date: Apr 2012 Location: SGV Posts: 675 Trader Rating: (0) Feedback Score: 0 reviews	Sick project bro!

07-30-2012, 02:06 AM	#27
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	some more goodies from America Was planning to finish up the front half of the chassis wiring harness today but to damn busy with a few E-Tunes. __________________ Brewed Motors IG @Brewedmotors

07-31-2012, 04:38 AM	#28
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	Fuse box and start switch all wired in and mounted on top of a little sticker bomb action __________________ Brewed Motors IG @Brewedmotors

08-01-2012, 09:13 AM	#29
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	pulled apart the front half of the chassis harness to make sure the engine bay won't be cluttered up by anything i don't want to look at haha __________________ Brewed Motors IG @Brewedmotors

08-01-2012, 10:49 AM	#30
h2v7 Nissanaholic! Join Date: Apr 2010 Location: san francisco, ohio Posts: 2,194 Trader Rating: (3) Feedback Score: 3 reviews	e30 love do it

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode