Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 02-12-2011, 05:06 AM   #1
turbokouki
BANNED
 
Join Date: Jan 2011
Location: southern california
Posts: 9
Trader Rating: (0)
turbokouki is an unknown quantity at this point
Feedback Score: 0 reviews
Rebuilt Ka24de low oil pressure problem

So i just got my car back from being rebuilt, and at idle the oil pressure is around 12psi, but with throttle it only goes up to around 15psi. Isnt it normally supposed to be around 50 in wot? It is still in the break in period so I am using cheap oil, i think its 10w-40 if i remember correctly. Any ideas to why it reads so low?
turbokouki is offline   Reply With Quote
Sponsored Links
Old 02-12-2011, 05:16 AM   #2
Tantwoforty
Nissanaholic!
 
Tantwoforty's Avatar
 
Join Date: May 2009
Location: Riverside ca
Age: 31
Posts: 1,890
Trader Rating: (20)
Tantwoforty is an unknown quantity at this point
Feedback Score: 20 reviews
i always use the better oil in the beginning..
seems safer to me idk lol
viscosity is fine though
Tantwoforty is offline   Reply With Quote
Old 02-12-2011, 10:59 AM   #3
jacobs13
Zilvia FREAK!
 
jacobs13's Avatar
 
Join Date: May 2009
Location: Long Beach
Age: 29
Posts: 1,061
Trader Rating: (27)
jacobs13 is an unknown quantity at this point
Feedback Score: 27 reviews
Why would you use cheap oil? This is why everyones cars get so fucked up because people cheap out. Oil isnt very exspensive and it is 100% worth it to fork out the money for better oil. Yes 15 is way too low. Dont drive the car or youll get to pay for a new rebuild. Im not trying to shit on you btw I just dont wanna see someone waste their money on a motor for something little. Who rebuilt the motor?
jacobs13 is offline   Reply With Quote
Old 02-12-2011, 11:04 AM   #4
nissanfreak317
Zilvia Junkie
 
nissanfreak317's Avatar
 
Join Date: Apr 2008
Location: Souderton, PA
Age: 35
Posts: 597
Trader Rating: (18)
nissanfreak317 is an unknown quantity at this point
Feedback Score: 18 reviews
Need moar info.
Mechanical or electrical gauge?
A shop took your car and rebuilt the motor and gave it back to you with issues?
You rebuilt the motor?
nissanfreak317 is offline   Reply With Quote
Old 02-12-2011, 11:21 AM   #5
turbokouki
BANNED
 
Join Date: Jan 2011
Location: southern california
Posts: 9
Trader Rating: (0)
turbokouki is an unknown quantity at this point
Feedback Score: 0 reviews
i had andrew from 9k racing do it for me, the first time we got it in it had no oil pressure, so had to be pulled again and redone, and we figured it needs a oil change soon for the break in period, then use good quality oil. its on a mechanical gauge
turbokouki is offline   Reply With Quote
Old 02-13-2011, 04:18 AM   #6
Tantwoforty
Nissanaholic!
 
Tantwoforty's Avatar
 
Join Date: May 2009
Location: Riverside ca
Age: 31
Posts: 1,890
Trader Rating: (20)
Tantwoforty is an unknown quantity at this point
Feedback Score: 20 reviews
He gave it to you with problems?
you took it knowing it has problems?
or they didn't take care of them before you had to come here?
...you let him pull it again after selling you a bad motor?
That sounds odd.

theres only a few reasons to have low oil pressure, and by design the ka oil pump has a pretty good life span on it to say the least.
So check your gauge.. if 2 motors have been low oil pressure consecutively that should be reason to check a gauge i would think..

where is the sensor being installed?
try a thicker oil and see if you see any change..
im not saying a oil pump cant go bad, although ive seen them seize more often than actually function and produce lower pressure..
but finding 2 from the same dude is kind of odd..

always use good oil on new engines. thats when its in its most vulnerable state.. the way it breaks in will define how long its life will be and why it will most likely fail and change it often. its worth the cost.

i hope you get it all worked out soon and dont blow it up and end up spending lots more money :/
also, you shouldn't floor it during break in period.. thats why there is such a thing.
Tantwoforty is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:22 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™