Power Steering with Hicus - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

1eightySX · 08-13-2007, 07:13 PM

Hello, I have a question about the power steering. My '91 180 is leaking PS fluid. I did some research and could not find a whole lot of info on repairing the Hicas system setup. What I mean specifically is if I wish to change the power steering lines, where would I get the presure lines for the hicus ps system? If possible not from dealership, but if not thats cool... i guess. thanks

Ninjabread · 08-13-2007, 07:18 PM

Which part of the lines do you need? I've got a rear subframe out with the back softlines intact.

Other than that, good luck.

2bad240 · 08-13-2007, 07:18 PM

what lines do you need the ones in the front or the ones that run to the back? i have a clip that has hicas and my car was a hicas, so i have all the lines.

1eightySX · 08-14-2007, 01:27 AM

Well i am thinking front, as that is where it seems to be leaking.I should be more specific with my vocabulary. What I am actually looking for is the hoses, at least I hope that is all I am looking for. I am not sure yet what is leaking. Haven't been able to pin point the leak and i was just doing some pre-lim work... for all I know it could be the pump. What seems to be happening is that it may be spraying up ward and then running down all over the place. I might have to cut the outter sponge layer that surrounds the hose in order to find the leak. So long story short what hoses should be used when replacing them on the s13 that features HICAS? Oh and any suggestions on fixing the problem would be greatly appreciated.

Ninjabread · 08-14-2007, 07:57 AM

Well, if it's one of your softlines ( from your reservoir, to and from the pump), it should be easy to find. Just put a piece of carboard under your car, start her up, and have someone turn the wheels. If there is enough pressure, it should start leaking a bit and you should be able to locate the crack if there is one.

I know mine once leaked because the hose clamp from the feed line on the pump was loose. Just tightened that and it's fine now.

Keep us updated.

mamsport · 08-14-2007, 06:32 PM

MA-MOTORSPORTS.COM makes a PS line but I don't know if it fits HICUS

Dousan_PG · 08-14-2007, 10:07 PM

its a non hicas HP line the MA one
i have it.

u can get the line from autoparts stores and the dealer of course.

1eightySX · 08-15-2007, 04:16 PM

Alright, I think I may have found the part that is leaking but I need to know if it is the return hose or the feeder hose and where to get the hose, keep in mind it is Hicas, I don't know if that makes a difference with this hose.

1eightySX · 08-15-2007, 09:06 PM

Hey I found this part number, 302295 M2020-67560 says its for Hicas. Is this the part I am looking for. Want to be sure I am getting the right one, found it at http://www.autopartswarehouse.com/mm...ose~parts.html

1eightySX · 03-03-2008, 01:25 PM

I totally forgot about this thread, but I think i t worth while to note that it would be appear that the north american part and the japanese parts are not the same. I found out the hard way and now I have the north american version of the HICAS power steering hose sitting in my trunk. I ended up just going to a shop ant the replaced the hose on the existing set up.

sentiumprogram · 11-07-2008, 11:05 PM

My power steering is leaking too and i also have HICAS. wanna sell your spare parts?

08-13-2007, 07:13 PM	#1
1eightySX Leaky Injector Join Date: Sep 2006 Location: canada Posts: 100 Trader Rating: (0) Feedback Score: 0 reviews	Power Steering with Hicus Hello, I have a question about the power steering. My '91 180 is leaking PS fluid. I did some research and could not find a whole lot of info on repairing the Hicas system setup. What I mean specifically is if I wish to change the power steering lines, where would I get the presure lines for the hicus ps system? If possible not from dealership, but if not thats cool... i guess. thanks

08-13-2007, 07:18 PM	#2
Ninjabread Post Whore! Join Date: Jul 2005 Location: Ottawa, Ontario Age: 32 Posts: 3,492 Trader Rating: (2) Rides Gallery: Ninjabread Feedback Score: 2 reviews	Which part of the lines do you need? I've got a rear subframe out with the back softlines intact. Other than that, good luck. __________________ 613DriftWerks.ca

08-13-2007, 07:18 PM	#3
2bad240 Leaky Injector Join Date: Feb 2007 Location: north carolina Age: 35 Posts: 109 Trader Rating: (0) Feedback Score: 0 reviews	what lines do you need the ones in the front or the ones that run to the back? i have a clip that has hicas and my car was a hicas, so i have all the lines. __________________ you, its whats for dinner.

08-14-2007, 07:57 AM	#5
Ninjabread Post Whore! Join Date: Jul 2005 Location: Ottawa, Ontario Age: 32 Posts: 3,492 Trader Rating: (2) Rides Gallery: Ninjabread Feedback Score: 2 reviews	Well, if it's one of your softlines ( from your reservoir, to and from the pump), it should be easy to find. Just put a piece of carboard under your car, start her up, and have someone turn the wheels. If there is enough pressure, it should start leaking a bit and you should be able to locate the crack if there is one. I know mine once leaked because the hose clamp from the feed line on the pump was loose. Just tightened that and it's fine now. Keep us updated. __________________ 613DriftWerks.ca

08-14-2007, 10:07 PM	#7
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 42 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	its a non hicas HP line the MA one i have it. u can get the line from autoparts stores and the dealer of course. __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

08-14-2007, 01:27 AM	#4
1eightySX Leaky Injector Join Date: Sep 2006 Location: canada Posts: 100 Trader Rating: (0) Feedback Score: 0 reviews	Well i am thinking front, as that is where it seems to be leaking.I should be more specific with my vocabulary. What I am actually looking for is the hoses, at least I hope that is all I am looking for. I am not sure yet what is leaking. Haven't been able to pin point the leak and i was just doing some pre-lim work... for all I know it could be the pump. What seems to be happening is that it may be spraying up ward and then running down all over the place. I might have to cut the outter sponge layer that surrounds the hose in order to find the leak. So long story short what hoses should be used when replacing them on the s13 that features HICAS? Oh and any suggestions on fixing the problem would be greatly appreciated.

08-14-2007, 06:32 PM	#6
mamsport Join Date: Jul 2007 Location: Maryland Posts: 13 Trader Rating: (0) Feedback Score: 0 reviews	MA-MOTORSPORTS.COM makes a PS line but I don't know if it fits HICUS

08-15-2007, 09:06 PM	#9
1eightySX Leaky Injector Join Date: Sep 2006 Location: canada Posts: 100 Trader Rating: (0) Feedback Score: 0 reviews	Hey I found this part number, 302295 M2020-67560 says its for Hicas. Is this the part I am looking for. Want to be sure I am getting the right one, found it at http://www.autopartswarehouse.com/mm...ose~parts.html

03-03-2008, 01:25 PM	#10
1eightySX Leaky Injector Join Date: Sep 2006 Location: canada Posts: 100 Trader Rating: (0) Feedback Score: 0 reviews	I totally forgot about this thread, but I think i t worth while to note that it would be appear that the north american part and the japanese parts are not the same. I found out the hard way and now I have the north american version of the HICAS power steering hose sitting in my trunk. I ended up just going to a shop ant the replaced the hose on the existing set up.

11-07-2008, 11:05 PM	#11
sentiumprogram Zilvia Member Join Date: Jun 2008 Location: no where Posts: 166 Trader Rating: (0) Feedback Score: 0 reviews	My power steering is leaking too and i also have HICAS. wanna sell your spare parts?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode