z32 diff question HELP!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Mn240sxGuy · 03-18-2013, 04:53 PM

Okay I was planning on doing a vlsd z32 diff swap to my s13 hatch, would I need a auto or manual diff? or if it doesn't matter??

plus what else would I need to complete it?? I've haven't found a exact answer to a VLSD swap with a z32 diff, its quite confusing me. I wanna use the z32 diff because of same ratios. HELP!! much appreciated!

Mn240sxGuy · 03-18-2013, 04:57 PM

Bump! Bump bump!

The Dude · 03-19-2013, 10:58 AM

KA24DEvelopment.com :: VLSD Swap Information

Mn240sxGuy · 03-20-2013, 05:26 PM

Quote:

Originally Posted by The Dude

KA24DEvelopment.com :: VLSD Swap Information

Thanks man!! I'll look into it.

Mn240sxGuy · 03-20-2013, 05:28 PM

But it still doesn't answer my question, which is "Can I use a z32 diff from a automatic tranny or a manual.. does it matter?

The Dude · 03-20-2013, 07:19 PM

I don't think it matters so long as it isn't a twin turbo diff.

BigKriss · 03-21-2013, 12:52 AM

I am about to drop the TT Z32 into my S14.
Some mods to the sub frame are the order of the day .
My S14 runs the factory LSD with the 3.7 ratio. Z32 tt is almost the same.

FYI.
http://forums.hybridz.org/index.php/...30-diff-mount/

Install Guide: Q45 Differential swap into 240SX subframe : 240SX Technical Forum

MAY BE OF INTEREST TO YOU, MAY NOT.

Mn240sxGuy · 03-27-2013, 09:50 AM

Quote:

Originally Posted by The Dude

I don't think it matters so long as it isn't a twin turbo diff.

Thanks this clarify it for me then

Mn240sxGuy · 03-27-2013, 09:53 AM

Quote:

Originally Posted by BigKriss

I am about to drop the TT Z32 into my S14.
Some mods to the sub frame are the order of the day .
My S14 runs the factory LSD with the 3.7 ratio. Z32 tt is almost the same.

FYI.
Differential / CV / LSD / HP / Torque / R160 / R180 / R200 / R230 / Diff Mount - Drivetrain - HybridZ

Install Guide: Q45 Differential swap into 240SX subframe : 240SX Technical Forum

MAY BE OF INTEREST TO YOU, MAY NOT.

Thanks man I'll keep this as reference.

Mn240sxGuy · 03-27-2013, 10:01 AM

So I a N/A z32 diff with outputs where the outputs are a 5 start pattern, I basically use early j30 axles where the bolts are also 5 start pattern which should bolt right on the, correct??

Rustys14 · 03-27-2013, 10:34 AM

Quote:

Originally Posted by Mn240sxGuy

So I a N/A z32 diff with outputs where the outputs are a 5 start pattern, I basically use early j30 axles where the bolts are also 5 start pattern which should bolt right on the, correct??

You are correct, it will bolt right in if you use the j30 5 bolt axles. I'm running the exact same setup in my coupe right now and it works great! You also have to swap out the z32 diff cover for the one on your s13 but I'm sure you already knew that.

Mn240sxGuy · 04-17-2013, 07:19 PM

Quote:

Originally Posted by Rustys14

You are correct, it will bolt right in if you use the j30 5 bolt axles. I'm running the exact same setup in my coupe right now and it works great! You also have to swap out the z32 diff cover for the one on your s13 but I'm sure you already knew that.

Thanks man!! Good lookin out, and I actually didn't know about the diff cover, but I sure do now..

03-18-2013, 04:53 PM	#1
Mn240sxGuy Join Date: Oct 2010 Location: Minnesota Age: 28 Posts: 34 Trader Rating: (0) Feedback Score: 0 reviews	z32 diff question HELP!!!! Okay I was planning on doing a vlsd z32 diff swap to my s13 hatch, would I need a auto or manual diff? or if it doesn't matter?? plus what else would I need to complete it?? I've haven't found a exact answer to a VLSD swap with a z32 diff, its quite confusing me. I wanna use the z32 diff because of same ratios. HELP!! much appreciated!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-18-2013, 04:57 PM	#2
Mn240sxGuy Join Date: Oct 2010 Location: Minnesota Age: 28 Posts: 34 Trader Rating: (0) Feedback Score: 0 reviews	Bump! Bump bump!

03-19-2013, 10:58 AM	#3
The Dude Zilvia Junkie Join Date: Sep 2003 Location: TN Age: 36 Posts: 357 Trader Rating: (4) Feedback Score: 4 reviews	KA24DEvelopment.com :: VLSD Swap Information

03-20-2013, 05:28 PM	#5
Mn240sxGuy Join Date: Oct 2010 Location: Minnesota Age: 28 Posts: 34 Trader Rating: (0) Feedback Score: 0 reviews	But it still doesn't answer my question, which is "Can I use a z32 diff from a automatic tranny or a manual.. does it matter?

03-20-2013, 07:19 PM	#6
The Dude Zilvia Junkie Join Date: Sep 2003 Location: TN Age: 36 Posts: 357 Trader Rating: (4) Feedback Score: 4 reviews	I don't think it matters so long as it isn't a twin turbo diff.

03-21-2013, 12:52 AM	#7
BigKriss Leaky Injector Join Date: Dec 2012 Location: South Africa Posts: 141 Trader Rating: (0) Feedback Score: 0 reviews	I am about to drop the TT Z32 into my S14. Some mods to the sub frame are the order of the day . My S14 runs the factory LSD with the 3.7 ratio. Z32 tt is almost the same. FYI. http://forums.hybridz.org/index.php/...30-diff-mount/ Install Guide: Q45 Differential swap into 240SX subframe : 240SX Technical Forum MAY BE OF INTEREST TO YOU, MAY NOT.

03-27-2013, 10:01 AM	#10
Mn240sxGuy Join Date: Oct 2010 Location: Minnesota Age: 28 Posts: 34 Trader Rating: (0) Feedback Score: 0 reviews	So I a N/A z32 diff with outputs where the outputs are a 5 start pattern, I basically use early j30 axles where the bolts are also 5 start pattern which should bolt right on the, correct??