TX GT2876R 0.64 A/R turbo - Great shape - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Def · 01-16-2011, 05:28 PM

SOLD!!!

Details:

Selling my 0.64 A/R turbine GT2876R Garrett turbo. It has very low mileage on it, has about 3k miles total (my S13 is not daily driven, or even driven every month). This turbo is in 100% working condition. It will come with a 4" to 3" 45 degree elbow (intake) and 2.5" 90 degree coupler for adapting to a 2.5" hot pipe. These couplers cost approximately $60 and are included. A 3" piece of straight tube goes right into intake coupler and will adapt to a N62 Z32 MAF.

Shaft play is normal, and well within acceptable ranges for a Garrett GT turbo. Side to side play is slight (which is 100% normal on a Garret GT turbo), axial (in and out) play is not discernable. No bearing problems.

This turbo has always had a 0.035" oil restrictor run on it, Mobil1 oil, always had coolant run on it, and idled to cool it down before shutdown.

I am not including a wastegate actuator with this, as my Forge wastegate had its diaphram rip, so I had to use the Garrett wastegate I had from this on my current turbo. The custom aluminum bracket and a stainless steel circlip for the WG flapper is included, so any 2 bolt straight shaft wastegate actuator will work with this and bolt right on.

Couplers included

Wastegate bracket:

SOLD!!!

canocrpse · 01-16-2011, 06:21 PM

Hey im very interested in the turbo. its standard T2 flange correct? Can you quote me shipping to 31406 Savannah GA? just lemme know thanks.

Def · 01-16-2011, 06:36 PM

Yes, it's a T2 flange, bolts right to an SR20DET manifold. Just need a little grinding on the motor mount bracket on that side (takes about 5 mins).

Suk02Si · 01-16-2011, 08:27 PM

I'll take it, PM sent.

sr20time · 01-16-2011, 09:48 PM

dang thats a good price.. hmmm u looking for a trade perhaps>?

Def · 01-17-2011, 07:56 AM

Quote:

Originally Posted by sr20time

dang thats a good price.. hmmm u looking for a trade perhaps>?

No one has paid yet, so I'm open to offers.

I don't really need much for my car, but would work something out for an S13 aluminum driveshaft (non-ABS) or anything interesting for a track car.

Suk02Si · 01-17-2011, 10:54 AM

Payment sent

01-16-2011, 05:28 PM	#1
Def Post Whore! Join Date: Apr 2004 Location: Houston, TX Posts: 2,701 Trader Rating: (16) Feedback Score: 16 reviews	GT2876R 0.64 A/R turbo - Great shape SOLD!!! Details: Selling my 0.64 A/R turbine GT2876R Garrett turbo. It has very low mileage on it, has about 3k miles total (my S13 is not daily driven, or even driven every month). This turbo is in 100% working condition. It will come with a 4" to 3" 45 degree elbow (intake) and 2.5" 90 degree coupler for adapting to a 2.5" hot pipe. These couplers cost approximately $60 and are included. A 3" piece of straight tube goes right into intake coupler and will adapt to a N62 Z32 MAF. Shaft play is normal, and well within acceptable ranges for a Garrett GT turbo. Side to side play is slight (which is 100% normal on a Garret GT turbo), axial (in and out) play is not discernable. No bearing problems. This turbo has always had a 0.035" oil restrictor run on it, Mobil1 oil, always had coolant run on it, and idled to cool it down before shutdown. I am not including a wastegate actuator with this, as my Forge wastegate had its diaphram rip, so I had to use the Garrett wastegate I had from this on my current turbo. The custom aluminum bracket and a stainless steel circlip for the WG flapper is included, so any 2 bolt straight shaft wastegate actuator will work with this and bolt right on. Couplers included Wastegate bracket: SOLD!!! __________________ S13 Hatch - Goes around tracks quickly DEFSPORT Last edited by Def; 01-17-2011 at 02:43 PM..

01-16-2011, 06:36 PM	#3
Def Post Whore! Join Date: Apr 2004 Location: Houston, TX Posts: 2,701 Trader Rating: (16) Feedback Score: 16 reviews	Yes, it's a T2 flange, bolts right to an SR20DET manifold. Just need a little grinding on the motor mount bracket on that side (takes about 5 mins). __________________ S13 Hatch - Goes around tracks quickly DEFSPORT

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-16-2011, 06:21 PM	#2
canocrpse Join Date: Jul 2009 Location: savannah GA Age: 34 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Hey im very interested in the turbo. its standard T2 flange correct? Can you quote me shipping to 31406 Savannah GA? just lemme know thanks.

01-16-2011, 08:27 PM	#4
Suk02Si Zilvia Addict Join Date: Dec 2004 Location: Los Angeles Age: 38 Posts: 831 Trader Rating: (8) Feedback Score: 8 reviews	I'll take it, PM sent.

01-16-2011, 09:48 PM	#5
sr20time Zilvia Junkie Join Date: Oct 2010 Location: canada Posts: 596 Trader Rating: (8) Feedback Score: 8 reviews	dang thats a good price.. hmmm u looking for a trade perhaps>?

01-17-2011, 10:54 AM	#7
Suk02Si Zilvia Addict Join Date: Dec 2004 Location: Los Angeles Age: 38 Posts: 831 Trader Rating: (8) Feedback Score: 8 reviews	Payment sent