GTR seats into a S14 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Tokyo Hippie · 03-11-2019, 02:49 PM

Was wondering if this has been done before. I have R35 GT-R seats that I'm looking to put into my 95' 240sx S14.
I know I would need a S14 Seat frame bracket and to remove the OEM ones off the GT-R seats and add an aftermarket rail that can drill into that bracket. Would still need tips if anything else is needed.

Toomuchboost12 · 03-11-2019, 02:56 PM

Have heard someone do it on here before but something about the seat hitting the roofline or something of that nature . Same applies to the 370Z recaros

Tokyo Hippie · 03-11-2019, 03:07 PM

they do fit inside but slightly almost there. I'm in the proccess of removing the brackets from the GT-r seats but am wondering if i can just use the s14 aftermarket bracket and GT-r rails to bolt onto it. since the brackets can be either side or bottom mountable i would probably choose the latter that allows a good bolt on profile. space would not be an issue since i have rear seat delete and going to using a rear harness bar for the seat belts.

03-11-2019, 02:49 PM	#1
Tokyo Hippie Join Date: Sep 2018 Location: Dallas, TX Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	GTR seats into a S14 Was wondering if this has been done before. I have R35 GT-R seats that I'm looking to put into my 95' 240sx S14. I know I would need a S14 Seat frame bracket and to remove the OEM ones off the GT-R seats and add an aftermarket rail that can drill into that bracket. Would still need tips if anything else is needed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-11-2019, 02:56 PM	#2
Toomuchboost12 Zilvia Addict Join Date: Jun 2012 Location: NYC Posts: 894 Trader Rating: (3) Feedback Score: 3 reviews	Have heard someone do it on here before but something about the seat hitting the roofline or something of that nature . Same applies to the 370Z recaros

03-11-2019, 03:07 PM	#3
Tokyo Hippie Join Date: Sep 2018 Location: Dallas, TX Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	they do fit inside but slightly almost there. I'm in the proccess of removing the brackets from the GT-r seats but am wondering if i can just use the s14 aftermarket bracket and GT-r rails to bolt onto it. since the brackets can be either side or bottom mountable i would probably choose the latter that allows a good bolt on profile. space would not be an issue since i have rear seat delete and going to using a rear harness bar for the seat belts.