Wheel spacer help. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

rv_zenki · 10-31-2013, 08:45 PM

Hi, I have a s14 zenki base with aftermarket wheels (Konig Feathers). They have universal 4x114.3 and 4x100 bolt pattern and I want to put some 20mm spacers on. My question is, will I need extended lugs if the spacers are hub centric because the back of my wheels don't have the space for the lugs to go? Will they stick out that far even though they are 20mm? Any help would be appreciated, thanks.

*dawagarage* · 10-31-2013, 10:12 PM

1, i was going to recommend running hubcentric spacers with attached studs rather than extended studs (and then i kept reading)

i ran 20mm spacers... but i cannot remember if the stock studs were completely flush (or under) the spacer. plus, my wheels DID have 'those recesses.'

one way to figure this out is to go out to your car, safely raise your car up, remove the wheel, and measure (with a ruler, etc) from the hub to the end of the (stock) stud. then convert from inches to metric. if its under 20mm, should work.

Rich260z · 10-31-2013, 10:59 PM

Generally studs are about an inch long, so 25mm, You may need to chop the ends of you studs off, which isn't a big deal. Just put an open end lug nut on, mark where you need to cut them and use an angle grinder. Then just clean up the threads as best you can and remove the lug.

rv_zenki · 11-01-2013, 07:46 AM

Alright thanks. I will measure then today and see how long they are!

FTR_Pete · 11-01-2013, 08:09 PM

I would use extended studs, go with ARP studs. Also any spacer 12mm and above should be hubcentric. More info found here: http://www.fullytorquedracing.co/writeups/spacerfaq.pdf

Also if you're looking for spacers check out my company Fully Torqued Racing. We make spacers for all kinds of cars including 240s.

CharCharXD · 11-01-2013, 11:13 PM

You're gonna need extended studs dude. I did them with mine and it was a bitch. Get 25mm or more. DONT CUT YOUR STOCK STUDS!

zo0d · 11-02-2013, 05:11 PM

+1 to bolt-on hubcentric spacers. You can get some for $60 on ebay. I've had mine on for 3 years no problem.

Anything under 25mm will require you to cut down your studs, no big deal.

skyline_guy777 · 11-02-2013, 05:17 PM

Yes agreed I'd used a bolt on 20mm had to cut my Oem studs not a big deal at all. Everything works and functions just fine.

10-31-2013, 08:45 PM	#1
rv_zenki Leaky Injector Join Date: Sep 2013 Location: Kalamazoo, Michigan Posts: 127 Trader Rating: (0) Feedback Score: 0 reviews	Wheel spacer help. Hi, I have a s14 zenki base with aftermarket wheels (Konig Feathers). They have universal 4x114.3 and 4x100 bolt pattern and I want to put some 20mm spacers on. My question is, will I need extended lugs if the spacers are hub centric because the back of my wheels don't have the space for the lugs to go? Will they stick out that far even though they are 20mm? Any help would be appreciated, thanks.

10-31-2013, 10:12 PM	#2
dawagarage Premium Member Join Date: Sep 2006 Location: Bremerton, WA Age: 36 Posts: 2,037 Trader Rating: (23) Feedback Score: 23 reviews	1, i was going to recommend running hubcentric spacers with attached studs rather than extended studs (and then i kept reading) i ran 20mm spacers... but i cannot remember if the stock studs were completely flush (or under) the spacer. plus, my wheels DID have 'those recesses.' one way to figure this out is to go out to your car, safely raise your car up, remove the wheel, and measure (with a ruler, etc) from the hub to the end of the (stock) stud. then convert from inches to metric. if its under 20mm, should work. __________________ formerly known as "hotboiblaze" ratsun: dawa (73 datsun 620) clublexus: properD (97 sc300)

11-01-2013, 08:09 PM	#5
FTR_Pete Join Date: Jul 2013 Location: Sacramento, CA Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Wheel spacer help. I would use extended studs, go with ARP studs. Also any spacer 12mm and above should be hubcentric. More info found here: http://www.fullytorquedracing.co/writeups/spacerfaq.pdf Also if you're looking for spacers check out my company Fully Torqued Racing. We make spacers for all kinds of cars including 240s. __________________ www.fullytorquedracing.co Custom racing design & CNC manufacturing Last edited by FTR_Pete; 11-02-2013 at 04:32 AM..

11-02-2013, 05:11 PM	#7
zo0d Zilvia Member Join Date: Apr 2008 Location: New Jersey Age: 31 Posts: 259 Trader Rating: (1) Feedback Score: 1 reviews	+1 to bolt-on hubcentric spacers. You can get some for $60 on ebay. I've had mine on for 3 years no problem. Anything under 25mm will require you to cut down your studs, no big deal. Last edited by zo0d; 11-04-2013 at 05:34 PM..

11-02-2013, 05:17 PM	#8
skyline_guy777 Zilvia Member Join Date: Jul 2007 Location: Binbrook Ontario Age: 36 Posts: 148 Trader Rating: (3) Feedback Score: 3 reviews	Yes agreed I'd used a bolt on 20mm had to cut my Oem studs not a big deal at all. Everything works and functions just fine. __________________ HORSEPOWER is like SEX, you can NEVER GET ENOUGH!!!

10-31-2013, 10:59 PM	#3
Rich260z Zilvia Addict Join Date: Apr 2011 Location: Burbank, CA Posts: 621 Trader Rating: (8) Feedback Score: 8 reviews	Generally studs are about an inch long, so 25mm, You may need to chop the ends of you studs off, which isn't a big deal. Just put an open end lug nut on, mark where you need to cut them and use an angle grinder. Then just clean up the threads as best you can and remove the lug.

11-01-2013, 07:46 AM	#4
rv_zenki Leaky Injector Join Date: Sep 2013 Location: Kalamazoo, Michigan Posts: 127 Trader Rating: (0) Feedback Score: 0 reviews	Alright thanks. I will measure then today and see how long they are!

11-01-2013, 11:13 PM	#6
CharCharXD Zilvia Junkie Join Date: Apr 2012 Location: Death Valley Posts: 384 Trader Rating: (5) Feedback Score: 5 reviews	You're gonna need extended studs dude. I did them with mine and it was a bitch. Get 25mm or more. DONT CUT YOUR STOCK STUDS!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode