how to remove s13 diff. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

s13superstar · 11-16-2010, 07:08 PM

hey guys the title pretty much sums it up but i can't find any links or tut's to help me. can you guys help me out or give me tips?

adrians_s13 · 11-16-2010, 07:15 PM

its pretty much straight forward, loosen up all the bolts that connect the diff to the driveshaft and the axles. Support the diff with a floor jack, then you got the 2 big bolts up front (where the bushings are) and like 4 in the back, then after all the bolts are off, lower the diff. I'd recommend draining it first before removing so its not soo heavy...

Sileighty_85 · 11-16-2010, 07:15 PM

^^Damn beat me too it lol

Unbolt Axles and drive shaft and sperate from Axle flange
remove the 4 nuts from rear cover
loosen the 2 front bolts
Support
remove Diff

Im sure if you go look at it Id hope you could figure it out.
also im sure the FSM will tell you how to do it as well

JDGrimReaper666 · 11-16-2010, 07:54 PM

DIY: Weld a Differential (w/ removal guide also) - Nissan 240SX Forums

this might help....

s13superstar · 11-17-2010, 03:28 PM

thanks for the help guys, will try it out tomm.

11-16-2010, 07:08 PM	#1
s13superstar Zilvia Member Join Date: Jul 2009 Location: hollis Posts: 198 Trader Rating: (0) Feedback Score: 0 reviews	how to remove s13 diff. hey guys the title pretty much sums it up but i can't find any links or tut's to help me. can you guys help me out or give me tips? __________________ 1994 240sx SE- SOLD 1983 Cressida - Factory 5spd.

11-16-2010, 07:15 PM	#2
adrians_s13 Post Whore! Join Date: Jul 2005 Location: long beach, CA ^_^ Age: 36 Posts: 2,877 Trader Rating: (29) Feedback Score: 29 reviews	its pretty much straight forward, loosen up all the bolts that connect the diff to the driveshaft and the axles. Support the diff with a floor jack, then you got the 2 big bolts up front (where the bushings are) and like 4 in the back, then after all the bolts are off, lower the diff. I'd recommend draining it first before removing so its not soo heavy... __________________ @adrianfromthecastle

11-16-2010, 07:15 PM	#3
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	^^Damn beat me too it lol Unbolt Axles and drive shaft and sperate from Axle flange remove the 4 nuts from rear cover loosen the 2 front bolts Support remove Diff Im sure if you go look at it Id hope you could figure it out. also im sure the FSM will tell you how to do it as well __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

11-16-2010, 07:54 PM	#4
JDGrimReaper666 Zilvia Addict Join Date: Jun 2009 Location: 619 Posts: 676 Trader Rating: (21) Feedback Score: 21 reviews	DIY: Weld a Differential (w/ removal guide also) - Nissan 240SX Forums this might help.... __________________ "Show no compassion, like having a straight face orgasm"

11-17-2010, 03:28 PM	#5
s13superstar Zilvia Member Join Date: Jul 2009 Location: hollis Posts: 198 Trader Rating: (0) Feedback Score: 0 reviews	thanks for the help guys, will try it out tomm. __________________ 1994 240sx SE- SOLD 1983 Cressida - Factory 5spd.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode