|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Motorsports and Skilled Driving Discussion for Organized Racing and motorsports and tips and techniques at becoming a better driver. |
|
Thread Tools | Display Modes |
|
04-11-2011, 08:55 PM | #1 |
Zilvia FREAK!
Join Date: Dec 2009
Location: earth
Age: 59
Posts: 1,138
Trader Rating: (0)
Feedback Score: 0 reviews
|
Alignment question s13 (drift)
I was wonder what should whats a good starting point for caster. I am gonna play with it and figure out what I like so should I just set it at stock then bump it up from there?? I have hear 6.5 to 7 degree's is optimal for an s13.
any input? the car has adj traction, toe, tension, and ruca's. no bench racers please Last edited by word sux; 04-12-2011 at 05:17 AM.. |
Sponsored Links |
04-14-2011, 12:30 PM | #5 |
Zilvia FREAK!
Join Date: Dec 2005
Location: orange county
Posts: 1,362
Trader Rating: (14)
Feedback Score: 14 reviews
|
caster +6-9 in my opinion with slight toe out about 1/8 inch and 3 degrees camber in the front. in the rear i would keep toe either zeroed or toe in a slight slight bit with 0-2 degrees of camber.
__________________
|
04-15-2011, 09:37 PM | #8 |
Zilvia Addict
Join Date: Dec 2010
Location: En mi casa
Age: 30
Posts: 619
Trader Rating: (7)
Feedback Score: 7 reviews
|
Toe in the front a couple of inches so you never lose control. And then toe out the back just to balance out your whole setup. This well GREATLY help with keeping control during powerslides and help initiate drifts. Also positive camber is good camber. Shazam, that's my 2 cents. 2 cents worth millions.
Good luck. :] |
04-16-2011, 08:02 AM | #9 | |
Zilvia Junkie
Join Date: Jan 2009
Location: las vegas
Age: 32
Posts: 440
Trader Rating: (1)
Feedback Score: 1 reviews
|
Quote:
thats sarcasm right? at least i hope it is
__________________
20 till 3:00 = ღ |
|
04-16-2011, 02:30 PM | #12 |
Post Whore!
Join Date: Nov 2007
Location: Southern California
Age: 36
Posts: 4,266
Trader Rating: (5)
Feedback Score: 5 reviews
|
wow....
how much power you putting down? zero toe all around half a degree to a full degree in the rear. as much neg camber in the front as you can get. |
04-16-2011, 03:50 PM | #13 |
Leaky Injector
Join Date: Apr 2008
Location: cincinnati ohio
Age: 39
Posts: 69
Trader Rating: (1)
Feedback Score: 1 reviews
|
im running stock sr turbo elbow full dp and exhaust im hopefully making 200 whp running 6.5 degrees of caster 2.5 neg camber in front 1 degree toe out thne in the rear 1 degree toe in 1 degree of neg camber on 235 17 45 tires on all 4 corners
|
04-16-2011, 07:15 PM | #14 |
Zilvia Junkie
|
frpont
3.5 camper toe 0 caster 8 rear camber -.5 toe 0 traction rod 10mm shorter then oem. this is a alignment i got from a buddy who drives for a living... give it a go. |
04-30-2011, 02:05 PM | #19 |
Post Whore!
Join Date: Nov 2007
Location: Southern California
Age: 36
Posts: 4,266
Trader Rating: (5)
Feedback Score: 5 reviews
|
needing to drift, and drifting professional are two different questions.
*think You don't NEED any amount of camber/caster/toe settings to get a car to drift. If you want a professional setup, I gave you one. If you want to slide the car around, any setting will allow you to do that. Letting the car drift easier, is what the alignment setting is going to do. More camber in the rear= less contact patch= less traction/forward grip More camber in the front=more contact patch under full lock=easier control mid drift Toe is a touchy subject, and should only be used in competition, and I cannot give you a base for tuning that as power/ suspension mods/ ride height/ tire size and compound all effect what toe settings you should have. It's like asking for aero tips, but you aren't going to time your laps. And even then, it's to some drivers preference. I prefer full tire contact at full lock vs dai looks like he's running minimal camber (which means better turn in, less contact at full lock, which allows for less friction coming from the front tires...it'll allow you to get more four wheel drift action/backwards driving/ cool drifting...down side is under full lock, the one with more contact patch gets better grip coming around a turn. There is only so much rear traction being made at any given point. so what was the question again? Oh yes...alignment specs. It's your preference/ what you want done. If you are looking for a base setup, anything will work. When you are starting to compete....that's when you want to start looking into go pro's and filming your suspension movements. |
04-29-2011, 11:25 AM | #21 | |
Zilvia Addict
Join Date: Sep 2010
Location: Orange County
Age: 42
Posts: 800
Trader Rating: (9)
Feedback Score: 9 reviews
|
Quote:
My 2 cents for a good "starting point" is taking it to a professional and possibly save the general public from injury... |
|
04-29-2011, 11:34 AM | #22 |
Post Whore!
Join Date: Sep 2006
Location: Hollywood
Age: 44
Posts: 7,031
Trader Rating: (7)
Feedback Score: 7 reviews
|
I ran stock street settings for about 3 or 4 years.
i only recently started messing with it a little. But I just have my guy Adrian give me something between drift and street. |
04-30-2011, 06:04 PM | #25 | |
Nissanaholic!
Join Date: Apr 2009
Location: lagrangeville, ny
Posts: 2,118
Trader Rating: (25)
Feedback Score: 25 reviews
|
Quote:
|
|
05-02-2011, 06:12 PM | #28 |
Premium Member
Join Date: Nov 2004
Location: North Korea
Posts: 14,576
Trader Rating: (27)
Feedback Score: 27 reviews
|
Front
Toe 1/16 toe out Camber -2.5* Caster 6.5* Rear Toe 0 Camber 1.5 Thrust stock Front camber should be set at whatever yields the most contact patch at lock. Rear camber depends on setup as well. I have found that rear camber on a car can actually increase grip when the body rolls. Caster is drivers preference. Rear toe depends on power/tire setup.
__________________
|
05-02-2011, 06:45 PM | #29 |
Zilvia Member
|
Caster does affect the contact patch but for someone just starting to drift, it more importantly affects how the steering wheel returns imo. I like to chuck the steering wheel and feed it myself so a lower caster setting works better for me. Some people prefer to let go of the wheel and let the car transition itself. Of course there's other factors... camber/toe/tires
My setup is like.. Front Camber -4 1/4 inch toe out 7ish caster Rear 0 toe -2 camber It sucks... I need more grip |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|