Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > Specific Topics > Off Topic Chat

Off Topic Chat All non related chat goes here.


Reply
 
Thread Tools Display Modes
Old 02-24-2012, 12:17 AM   #61
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by turbo_dreams View Post
My apology if this has been covered,
Have you ever dealt with having a car shipped to you for work? If you don't mind p.m'ing me a price to do your cluster setup (same as the one on your car) along with setting up a fully functional jdm climate control unit from scratch. If you can add what parts I'd need to complete that conversion it'd really help in the quest of piecing that together on my end.
I will work on any car as long as it is at my shop. I don't care if you drive it, ship it, float it etc. However, if the car is already some POS wiring nightmare, hack job, then I will decline it. When you say you want my cluster setup, what exactly do you mean? The gauges and HUD I had are no longer available. So just let me know exactly what you want in the cluster and I can shoot you a price. You can find pricing to get you started here:

http://zilvia.net/f/interior-exterio...roadfield.html

Quote:
Originally Posted by Bubbles View Post
My car vibrates in the rear when I take off. Roughest when taking off and turning. Not too bad when taking off not turning. Does better if you drop the clutch a bit rather than easing out. Just changed the diff fluid and it's better but not great.

Driveshaft? Bushings/mounts? New differential?
Sorry, not even remotely my line of work.

Quote:
Originally Posted by bejota180sx View Post
i know we talked about this earlier on the other thread but could you recommend me somethign for the near future... i dont really use any headunit like cd or radio on my build car, you said to just run a amplifier and speakers... what amp and speakers do you recommend for all around quality and a good price. doesnt have to be high class sounding since im not building a sound system, ill leave that for my daily vert...

and ps. im still frying my brain thinking about what to do with the gauges, i can't seem to make up my mind to what i want to ask for an exact price...
Yes, you can run a cable directly from your device to an amplifier. I would highly recommend the ARC XDi804 and Hybrid Audio Mirius. These would be the very best of entry level gear. Please PM or email me if you need pricing.

Quote:
Originally Posted by whitepony22 View Post
Ok I have two questions for you.

Speaker question:

I plan on putting an Alpine iDA-X305S in my S13 and maybe even into my STi as well. I have a 04 Chevy Avalanche with the factory Bose system in it and honestly have never heard a clearer, more well balanced setup. Whether low, or as loud as possible the sound is completely clear across all levels no matter what style of music you're listening to. With the Alpine, what speaker combination would you recommend to achieve a sound similar to this in either of my cars? I would prefer to do it without subs/amps as both cars are more on the track/performance side and would prefer not to add them. Would it be possible to have the sound without them simply with speakers/tweeters? Ideas/advice?

Second question is an interior question:

I plan on making a hidden setup for my S13's double din pocket to cover up my headunit/gauges so that the lights don't bother me at night. Do you have any idea where to get a generic flip up hinge such as that in a 350z's pop up compartment, the STi coin tray, anything like that where it's a simple push and it opens, and push down and it's closed.

Thanks.
As for speakers, I will always recommend Hybrid Audio over anything on the market. However, your Bose setup is amplified... you will not get the same volume or midbass impact without an aftermarket amplifier driving the Hybrids.

As for a hinge, that's easy. But I assume you want the latching device? You would probably need to fab something yourself. Some of those pockets with the "auto" door are somewhat complicated. You could maybe use a spring loaded magnet release setup!?!

Quote:
Originally Posted by Big Zee View Post
I read through this Thread and did not see the answer to my question. So I will ask it.

What de-pinning tools do you use/recommend ? I would like to try my hand at cleaning up my wiring harness and want to do a proper job that looks neat and tidy with proper plugs.
Thanks in Advance!!

Dustin Z
I have multiple different sets from MAC, Matco and Snap-On. However, it's very rare I have to de-pin a plug in my line of work. I would ask Chase or Jeff Jordan.

Quote:
Originally Posted by KiLLeR2001 View Post
Toby, does Viper make a sensor or switch for the gas door? So that if an intruder opens the gas flap (while alarm is armed), it will trigger. I know I could get creative and try to customize one, but was wondering if Viper offers any such device.

And if they do make it, is it compatible with the Viper 5901?
You would simply use a magnetic switch like one of these from DEI. PM or email me for pricing.



__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Sponsored Links
Old 02-24-2012, 12:37 AM   #62
hpipro4
Zilvia FREAK!
 
hpipro4's Avatar
 
Join Date: Dec 2008
Location: norcal 530
Posts: 1,003
Trader Rating: (71)
hpipro4 is an unknown quantity at this point
Feedback Score: 71 reviews
where can i get this carpet you use? thnx

Last edited by hpipro4; 02-24-2012 at 11:55 AM..
hpipro4 is offline   Reply With Quote
Old 02-24-2012, 12:39 AM   #63
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by hpipro4 View Post
where can i get this carpet you use? thnx
From me! It runs $9/yd and is 52" wide.
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 02-24-2012, 12:59 AM   #64
hpipro4
Zilvia FREAK!
 
hpipro4's Avatar
 
Join Date: Dec 2008
Location: norcal 530
Posts: 1,003
Trader Rating: (71)
hpipro4 is an unknown quantity at this point
Feedback Score: 71 reviews
Quote:
Originally Posted by Broadfield View Post
From me! It runs $9/yd and is 52" wide.
how do you go by taking out the old carpeting on the panels? i have the hatch and dont like the brown carpeting.

thnx
hpipro4 is offline   Reply With Quote
Old 02-24-2012, 07:34 AM   #65
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by hpipro4 View Post
how do you go by taking out the old carpeting on the panels? i have the hatch and dont like the brown carpeting.

thnx
You carpet over the old carpet.
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 02-24-2012, 09:14 AM   #66
hpipro4
Zilvia FREAK!
 
hpipro4's Avatar
 
Join Date: Dec 2008
Location: norcal 530
Posts: 1,003
Trader Rating: (71)
hpipro4 is an unknown quantity at this point
Feedback Score: 71 reviews
Quote:
Originally Posted by Broadfield View Post
You carpet over the old carpet.
can you go over the process? pls

do i need to scuff some of the old carpet out or just spray some glue and lay over the new carpet?

thnx

Last edited by hpipro4; 02-24-2012 at 11:53 AM..
hpipro4 is offline   Reply With Quote
Old 02-24-2012, 11:32 AM   #67
blueshark123
Post Whore!
 
blueshark123's Avatar
 
Join Date: Apr 2006
Location: North Jersey
Posts: 5,481
Trader Rating: (55)
blueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant future
Feedback Score: 55 reviews
I have a viper alarm question I had bought a AU94tm Sensor for a viper alarm system that i never got to use on. I just got a newer viper 5701, Can this sensor be installed if so how since it doesn't plug into the auxiliary port of the brain. If it doesnt work what do you recommend to use instead of this? 509u?
blueshark123 is offline   Reply With Quote
Old 02-24-2012, 05:21 PM   #68
Big Zee
Zilvia Addict
 
Big Zee's Avatar
 
Join Date: Oct 2005
Location: BC
Age: 37
Posts: 860
Trader Rating: (10)
Big Zee has made poor choicesBig Zee has made poor choicesBig Zee has made poor choicesBig Zee has made poor choicesBig Zee has made poor choicesBig Zee has made poor choices
Feedback Score: 10 reviews
Send a message via MSN to Big Zee
Thank you!!
Big Zee is offline   Reply With Quote
Old 02-24-2012, 06:00 PM   #69
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by hpipro4 View Post
can you go over the process? pls

do i need to scuff some of the old carpet out or just spray some glue and lay over the new carpet?

thnx
You can simply use the can spray adhesive I posted here:

http://zilvia.net/f/off-topic-chat/4...ml#post4535729

You will want to spray both surfaces and let it set for a few minutes. You can then apply the new carpet right over the old stuff. I'm sure this will take a little practice. You will probably end up with wrinkles etc. It takes a little bit of skill to wrap the panels with no imperfections. However, you can always rip the carpet off and start over with a fresh piece if needed.



Quote:
Originally Posted by blueshark123 View Post
I have a viper alarm question I had bought a AU94tm Sensor for a viper alarm system that i never got to use on. I just got a newer viper 5701, Can this sensor be installed if so how since it doesn't plug into the auxiliary port of the brain. If it doesnt work what do you recommend to use instead of this? 509u?
You can just cut the plug off and hardwire to the Viper. It should of come with instructions!?! If not let me know and I'll figure out what goes to what.

The only bad thing about that sensor and the Viper 508D for that matter, is the fact that they may false with all of the RF interference there is these days. So now I really only use the 509U and have zero issues.

Quote:
Originally Posted by Big Zee View Post
Thank you!!
No problem!
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 02-24-2012, 06:58 PM   #70
!!chuy!!
Leaky Injector
 
!!chuy!!'s Avatar
 
Join Date: May 2007
Location: OREGON
Age: 32
Posts: 97
Trader Rating: (0)
!!chuy!! is not welcome here anymore!!chuy!! is not welcome here anymore!!chuy!! is not welcome here anymore!!chuy!! is not welcome here anymore!!chuy!! is not welcome here anymore!!chuy!! is not welcome here anymore!!chuy!! is not welcome here anymore!!chuy!! is not welcome here anymore!!chuy!! is not welcome here anymore!!chuy!! is not welcome here anymore!!chuy!! is not welcome here anymore
Feedback Score: 0 reviews
i have a question /questions and need oppinions... here it goes.(spelling sucks)

so ive had my rb25 s1 in my s13 for about 5 to 6 years now...and ive also had a welded diff for the longest time since i first swapped the motor.. and im simply tired of it hahahh ( people with welded diffs know what im talking about ahah) well i love that its locked when i dump the clutch and allows me to go sideways but i hate that its locked when im taking a simple 5 mph turn...all that jerkin need to come to an end lol, but ive wanted a real lsd for the longest time now.... and i dont wanna go thrue the hassle of getting a vlsd.... i have the money should i buy it?

heres were it gets tricky and i cant simply decide what i want to do with my money just yet.... i also want to tune my car.. its stock with just a fmic and exhaust... (and in mind of getting rid of my stuppid maf...i hate that thing..). ive had alot of fun with it threw the years but for a while now ive gotten use to it and i want to feel more power and slowly start adding things on to the motor...thats wy i want to get an engine management system...perferably AEM ems v2 along those lines of a fully programable system. what would you purchase... oppinions greatly appreciated.
i like going sideways but i also like the sound of the engine. so im not sure what i should do first...eventually they will both be purchase and equiped in the vehicle but i need a start somewere... what should i do..................
!!chuy!! is offline   Reply With Quote
Old 02-24-2012, 07:55 PM   #71
blueshark123
Post Whore!
 
blueshark123's Avatar
 
Join Date: Apr 2006
Location: North Jersey
Posts: 5,481
Trader Rating: (55)
blueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant future
Feedback Score: 55 reviews
Quote:
Originally Posted by Broadfield View Post



You can just cut the plug off and hardwire to the Viper. It should of come with instructions!?! If not let me know and I'll figure out what goes to what.

The only bad thing about that sensor and the Viper 508D for that matter, is the fact that they may false with all of the RF interference there is these days. So now I really only use the 509U and have zero issues.

Nope no instructions all it says is that you have to plug it into the auxilary port. Its 4 wires if you figure out how to make it work please let me know, in the mean time i will try to google up on it some more.

Thanks for the help
blueshark123 is offline   Reply With Quote
Old 02-24-2012, 08:29 PM   #72
TougeLove
Zilvia Addict
 
TougeLove's Avatar
 
Join Date: Nov 2009
Location: so cal
Age: 37
Posts: 846
Trader Rating: (5)
TougeLove is an unknown quantity at this point
Feedback Score: 5 reviews
is an s2000 cluster plug and play possible for my 89 coupe. if so, ballpark figure for price?
__________________
Quote:
Originally Posted by simmode1 View Post
Make a thread about it so we can sit in judgement of them too. Zilvia is an equal opportunity finger pointing forum.
TougeLove is offline   Reply With Quote
Old 02-26-2012, 09:23 AM   #73
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by !!chuy!! View Post
i have a question /questions and need oppinions... here it goes.(spelling sucks)

so ive had my rb25 s1 in my s13 for about 5 to 6 years now...and ive also had a welded diff for the longest time since i first swapped the motor.. and im simply tired of it hahahh ( people with welded diffs know what im talking about ahah) well i love that its locked when i dump the clutch and allows me to go sideways but i hate that its locked when im taking a simple 5 mph turn...all that jerkin need to come to an end lol, but ive wanted a real lsd for the longest time now.... and i dont wanna go thrue the hassle of getting a vlsd.... i have the money should i buy it?

heres were it gets tricky and i cant simply decide what i want to do with my money just yet.... i also want to tune my car.. its stock with just a fmic and exhaust... (and in mind of getting rid of my stuppid maf...i hate that thing..). ive had alot of fun with it threw the years but for a while now ive gotten use to it and i want to feel more power and slowly start adding things on to the motor...thats wy i want to get an engine management system...perferably AEM ems v2 along those lines of a fully programable system. what would you purchase... oppinions greatly appreciated.
i like going sideways but i also like the sound of the engine. so im not sure what i should do first...eventually they will both be purchase and equiped in the vehicle but i need a start somewere... what should i do..................
If it was me I would take care of the diff first... I wouldn't be caught dead with a welded diff. This is assuming that your car is running fine without engine management though.

As for the engine management, I only have experience on the Nissans with the PowerFC. Which I had zero issues with.

Quote:
Originally Posted by blueshark123 View Post
Nope no instructions all it says is that you have to plug it into the auxilary port. Its 4 wires if you figure out how to make it work please let me know, in the mean time i will try to google up on it some more.

Thanks for the help
Ok, I'll start looking for wiring info on it.

Quote:
Originally Posted by TougeLove View Post
is an s2000 cluster plug and play possible for my 89 coupe. if so, ballpark figure for price?
I don't do the wiring side of it for customers without the car in my possession.... I would need your car and cluster to test for proper operation etc.
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 02-26-2012, 03:27 PM   #74
upsdude
Post Whore!
 
upsdude's Avatar
 
Join Date: Apr 2009
Location: Fontana (the good part)
Posts: 2,721
Trader Rating: (46)
upsdude is an unknown quantity at this point
Feedback Score: 46 reviews
seriously considering a keyless ignition system. but don't want to just get a cheapy ebay kit. found this on google and have yet to really look around, but what do you think about this:

Advanced Keys - AK-104B Smart Key with Push Start System

i'm a total noob to this stuff but it looks like a good system with the rfid cards and emergency back up cards too. any thoughts?
upsdude is offline   Reply With Quote
Old 02-26-2012, 04:03 PM   #75
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by upsdude View Post
seriously considering a keyless ignition system. but don't want to just get a cheapy ebay kit. found this on google and have yet to really look around, but what do you think about this:

Advanced Keys - AK-104B Smart Key with Push Start System

i'm a total noob to this stuff but it looks like a good system with the rfid cards and emergency back up cards too. any thoughts?
I have actually considered becoming a dealer for this company in the past... just to get one of their units in and check it out to see if it's legit or a hunk of crap. I have no experience with this kit or any other RFID kit for that matter. I obviously work around the OEM stuff everyday and have no complaints.
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 02-26-2012, 10:06 PM   #76
Flush240
 
Join Date: Apr 2011
Location: United States
Posts: 21
Trader Rating: (3)
Flush240 is an unknown quantity at this point
Feedback Score: 3 reviews
engine bay

I apologize if this has been posted already...

Could you provide me a list of the materials you used to prep the engine bay for paint and where did you get them from?
Flush240 is offline   Reply With Quote
Old 02-26-2012, 10:52 PM   #77
Future240
Super Moderator
 
Future240's Avatar
 
Join Date: Jun 2007
Location: Places
Age: 33
Posts: 12,712
Trader Rating: (17)
Future240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfection
Feedback Score: 17 reviews
Send a message via AIM to Future240 Send a message via MSN to Future240 Send a message via Yahoo to Future240
First off I'd like to offer many thanks for this thread. I have always admired your work.

So I figured it is time to get serious with my car audio. GSXRJJordan has given me a lot of good pointers to start with.

These fronts and highs
6.5" CDT Audio CL-62 PRO Classic Component Set CL62 NEW | eBay

Originally this amp
CADENCE AUDIO 300 WATT RMS 2 CHANNEL CAR AMPLIFIER AMP | eBay

I saw this one and thinking about it now.
XaH175.2 CADENCE ORANGE 2 CHANNEL AMP 700W SUB SUBWOOFERS SPEAKER AMPLIFIER NEW | eBay


Replacing the old pioneer with a newer one. Deciding between these three.
DEH-80PRS - <b>NEW!</b> - CD Receiver with 3-Way Active Crossover Network, Auto EQ, and Auto Time Alignment | Pioneer Electronics USA
DEH-P9400BH - <b>NEW!</b> - CD Receiver with Full-Dot LCD Display, Built-In Bluetooth®, and HD Radio™ Tuner | Pioneer Electronics USA
DEH-P8400BH - <b>NEW!</b> - CD Receiver with Full-Dot LCD Display, MIXTRAX, Built-In Bluetooth®, and HD Radio™ Tuner | Pioneer Electronics USA

Right now I have a Fi SSD 12" with an Autotek amp.

I want to switch those out with a JL W7 12" ( I really want a 13.5, but I don't think a 13.5 would fit an S14 trunk well) with MBQuart or Hifonics amp (does it really matter since they are both Maxxsonics products?)

HIFONICS HFi1500D 1500 W Car Mono Class D Amplifier/Amp | eBay

MB QUART ONX1.1500D MONO BLOCK CLASS D 1500W RMS MOSFET CAR SUB WOOFER AMPLIFIER | eBay

As far as sound deadening after reading some stuff I think I will be using second skin all over, maybe some foam in the doors, and replacing the window seals all around.

May you give me your thoughts on it?
__________________
Quote:
Originally Posted by ThatGuy
Your opinions mean nothing to me, and you can both go fuck yourselves..
Future240 is offline   Reply With Quote
Old 02-26-2012, 11:19 PM   #78
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by Flush240 View Post
I apologize if this has been posted already...

Could you provide me a list of the materials you used to prep the engine bay for paint and where did you get them from?
Are you just repainting, shaving, filling, repairing? The list of items is going to vary greatly depending on what you are doing.

Quote:
Originally Posted by Future240 View Post
First off I'd like to offer many thanks for this thread. I have always admired your work.

May you give me your thoughts on it?
Thanks for the thanks! However, you are not going to get too much advice from me. This is where I draw the line since my business is high-end car audio. You asking me about all of this Ebay crap is like calling up the Ferrari dealership and asking them which Ford you should buy. Keep in mind, I HATE Ebay... it has ruined the car audio industry. A bunch of nobody's selling car audio for next to nothing out of a warehouse. They are not authorized and only know the product from what the description says on the box. So please understand where I am coming from and have enough respect for my knowledge and service to not ask me about audio product that I don't sell... it would be a conflict in interest.

Funny story: I had a guy come in my store last year and literally asked me what speakers I would recommend so he could go buy them off the internet. I'm thinking to myself, REALLY you just asked me that!?! I quite frankly told him to ask the internet site he was buying them off of. I think he finally got the picture.

If you would like pricing on stuff that I would recommend from my shop then I would be more than happy to help you out. But I will tell you up front that I don't have anything as cheap as what you are looking at for the most part.... but you do get what you pay for.
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 02-27-2012, 12:03 AM   #79
Flush240
 
Join Date: Apr 2011
Location: United States
Posts: 21
Trader Rating: (3)
Flush240 is an unknown quantity at this point
Feedback Score: 3 reviews
Quote:
Originally Posted by Broadfield View Post
Are you just repainting, shaving, filling, repairing? The list of items is going to vary greatly depending on what you are doing.
actually i'm doing all the things you mentioned.
Flush240 is offline   Reply With Quote
Old 02-27-2012, 12:19 AM   #80
DreamN
Post Whore!
 
DreamN's Avatar
 
Join Date: Nov 2006
Location: SoCal - 818
Age: 36
Posts: 10,691
Trader Rating: (54)
DreamN is close to perfectionDreamN is close to perfectionDreamN is close to perfectionDreamN is close to perfectionDreamN is close to perfectionDreamN is close to perfectionDreamN is close to perfectionDreamN is close to perfectionDreamN is close to perfectionDreamN is close to perfectionDreamN is close to perfection
Feedback Score: 54 reviews
Any advice on removing fine scratches and imperfections from the gauge cluster clear plastic cover?
__________________
- Jimmy

Wanted:

TBD

For Sale:
TBD
DreamN is offline   Reply With Quote
Old 02-27-2012, 12:56 PM   #81
Future240
Super Moderator
 
Future240's Avatar
 
Join Date: Jun 2007
Location: Places
Age: 33
Posts: 12,712
Trader Rating: (17)
Future240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfection
Feedback Score: 17 reviews
Send a message via AIM to Future240 Send a message via MSN to Future240 Send a message via Yahoo to Future240
I understand, those links I posted are not eBay products. Those are products sold on eBay. I would never buy buy eBay knock offs.

I was under the impression that the stuff I posted is high quality.
http://www.cdtaudio.com/cl_series.htm
http://www.maxxsonics.com/
http://www.cadencesound.com/categories/Amplifiers/



My next question is then what defines high quality car audio? Specially what should one look for when shopping for high quality audio and how to tell the difference between high quality and bottom barrel.
__________________
Quote:
Originally Posted by ThatGuy
Your opinions mean nothing to me, and you can both go fuck yourselves..
Future240 is offline   Reply With Quote
Old 02-27-2012, 01:10 PM   #82
dkim1985
Zilvia Addict
 
dkim1985's Avatar
 
Join Date: Apr 2011
Location: Gardena, CA
Posts: 771
Trader Rating: (28)
dkim1985 is an unknown quantity at this point
Feedback Score: 28 reviews
Quote:
Originally Posted by Broadfield View Post
Quote:
Originally Posted by dkim1985
do you have any recommendations on how to restore torn vinyl?
on my s13 door, the lining of the vinyl where the main cloth piece is has torn a bit.
i want to take off the cloth and just leave it black but in doing that, the torn part will definitely be visible..
Post a pic of it please.

If you see where the arrow is pointing, the vinyl is 'curving' upward and that little space where the fabric starts is starting to tear the vinyl along that line. I also have another set of doors that have the same problem.
__________________
FS: Nismo R-Tune Camshafts for VQ35DE.

Last edited by dkim1985; 07-25-2014 at 02:56 PM..
dkim1985 is offline   Reply With Quote
Old 02-27-2012, 08:37 PM   #83
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by Flush240 View Post
actually i'm doing all the things you mentioned.
You will need:

Etch primer
Maybe weld-thru primer
Various grits of sandpaper: 80, 120, 180, 240, 320, 400, 500
Air sander with 36, 50 grit
Electric grinder with flapper wheel sanding disc
Rage Gold filler
Rage Metal Glaze
Seam Sealer
Filler spreaders
Maxx Solv
3M red scuff pads
3M grey scuff pads
3M guide coat or similar

I'm sure I'm forgetting something. If you have any questions as you are doing it, check out my post in this thread or shoot me a PM.

http://zilvia.net/f/off-topic-chat/4...ml#post4535485


Quote:
Originally Posted by DreamN View Post
Any advice on removing fine scratches and imperfections from the gauge cluster clear plastic cover?
Wet sand it then polish it with automotive polish. You will need to use various grits of sandpaper depending on how deep your scratches are. I usually use 1200, 1500 then finish with 2000. I then use four stages of polish from Pinnacle. I sand and polish both the inside and outside. If 1200 grit doesn't remove your scratches then you will need to start with a harsher grit and still end up at 2000.

Quote:
Originally Posted by Future240 View Post
I understand, those links I posted are not eBay products. Those are products sold on eBay. I would never buy buy eBay knock offs.

I was under the impression that the stuff I posted is high quality.
CL Series
MAXXSONICS HIFONICS CRUNCH AUTOTEK MB QUART
Amplifiers - Cadence Sound Store



My next question is then what defines high quality car audio? Specially what should one look for when shopping for high quality audio and how to tell the difference between high quality and bottom barrel.
I guess I should of said crappy Ebay sellers who are not authorized to sell the product. However, most of those brands you listed may actually encourage internet sales. All your legitimate big name brands do not allow traditional internet sales... shopping cart websites etc. Since I do not sell from a traditional site, I get away with it. It's impossible to buy something from me with out direct contact with me first. That way I can make sure my customers are getting the correct product for their needs before they purchase it.

As for being able to tell the difference between crap and good... the price. One of those amplifiers was like $119 or something for a "700" watt amplifier. Christ, I can't even buy a pair of jeans for that cheap. Anything that cheap is for sure made in China, most likely designed in China and has a cookie cutter circuit board copied from some other cheap Chinese made amplifier. It won't put out 700 watts because it goes against the laws of electricity to be able to do that on a 40 amp fuse. It would need 17.5 volts at 40 amps to produce 700 watts. An amplifier that cheap will typically have minimal capacitance, cheap power supply, poor signal-to-noise ratio, poor dampening factor, poor ground loop noise isolation etc.

CDT is fine, definitely not as good as Hybrid Audio, but nothing is. MB Quart used to be really good when I started my career.... 20 years ago. It's total cheap crap now unfortunately. A 1500 watt mono block for $164 makes me laugh. I can't believe it's possible to make an amplifier that cheap.

Quote:
Originally Posted by dkim1985 View Post
If you see where the arrow is pointing, the vinyl is 'curving' upward and that little space where the fabric starts is starting to tear the vinyl along that line. I also have another set of doors that have the same problem.
The only way to fix that is to remove the tweed and vinyl from the insert, glue the vinyl down where it's lifting, then reupholster the insert with new material.
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 02-27-2012, 09:55 PM   #84
upsdude
Post Whore!
 
upsdude's Avatar
 
Join Date: Apr 2009
Location: Fontana (the good part)
Posts: 2,721
Trader Rating: (46)
upsdude is an unknown quantity at this point
Feedback Score: 46 reviews
Quote:
Originally Posted by Broadfield View Post
I have actually considered becoming a dealer for this company in the past... just to get one of their units in and check it out to see if it's legit or a hunk of crap. I have no experience with this kit or any other RFID kit for that matter. I obviously work around the OEM stuff everyday and have no complaints.


well i guess i could try it and do a review lol
upsdude is offline   Reply With Quote
Old 02-27-2012, 10:46 PM   #85
Future240
Super Moderator
 
Future240's Avatar
 
Join Date: Jun 2007
Location: Places
Age: 33
Posts: 12,712
Trader Rating: (17)
Future240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfectionFuture240 is close to perfection
Feedback Score: 17 reviews
Send a message via AIM to Future240 Send a message via MSN to Future240 Send a message via Yahoo to Future240
What are your thoughts on signal processors and capacitors?
__________________
Quote:
Originally Posted by ThatGuy
Your opinions mean nothing to me, and you can both go fuck yourselves..
Future240 is offline   Reply With Quote
Old 02-28-2012, 12:01 AM   #86
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by upsdude View Post
well i guess i could try it and do a review lol
Go for it!

Quote:
Originally Posted by Future240 View Post
What are your thoughts on signal processors and capacitors?
I don't use capacitors too often... most customers don't fork over the dough. And believe it or not there is a big difference from one brand to the next. If you buy a $50 capacitor it isn't going to do a damn thing for you. Check this out:

Do Capacitors Do Anything - The Truth About Car Audio Capacitors - YouTube

As for signal processing, this is totally up to you. It's designed to supplement any deficiencies you have in your staging and frequency response. I usually like to keep it simple so I usually forgo processors. I only use quality speakers that will accurately reproduce the notes as they were intended in the original recording. Marry a good set of speakers with a decent amplifier(s) and that will take you a long ways. Now if I competed on a national level then that would change things... I would have a pretty mean processor.
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 02-28-2012, 06:00 AM   #87
milk_with_pulp
Zilvia Member
 
Join Date: Jun 2010
Location: Fuck You
Posts: 168
Trader Rating: (0)
milk_with_pulp is an unknown quantity at this point
Feedback Score: 0 reviews
Send a message via ICQ to milk_with_pulp Send a message via AIM to milk_with_pulp Send a message via Yahoo to milk_with_pulp
Toby,

Upgrading 1998 240sx Ground/Power. AKA Big 3 Upgrade.
Currently the wires are stock and have read information about upgrading Alternator Wire, Chassis Ground, Engine Block Ground to improve audio performance.


What type of Battery Terminals to use for the wire
What type of cable/wire
What gauge do you suggest
What points would you recommend to upgrade

Looking for a distributor that would sell terminals that are worth while, I see many cheap terminals and some which are extremely expensive to connect the wires to a battery, most seem to be a rip off where people buy for the hype.

From my few years in wiring homes, I know of gauges for wiring, curious though as I see some recommending 2 gauge/ 0 gauge for these grounding points. The wire is extremely stiff and was wondering what you recommend.

Also, would ask for any suggestions on antennas for a Nissan to replace the long antennas, it was a fixed antenna non powered and would like something small, less of an eyesore.

Any help and information is appreciated and do you suggest any forums for car audio that you frequently visit or read for information?
milk_with_pulp is offline   Reply With Quote
Old 02-28-2012, 08:32 AM   #88
Broadfield
Zilvia.net Advertiser
 
Broadfield's Avatar
 
Join Date: Oct 2006
Location: Normal, IL
Age: 47
Posts: 2,946
Trader Rating: (163)
Broadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to allBroadfield is a name known to all
Feedback Score: 163 reviews
Quote:
Originally Posted by milk_with_pulp View Post
Toby,

Upgrading 1998 240sx Ground/Power. AKA Big 3 Upgrade.
Currently the wires are stock and have read information about upgrading Alternator Wire, Chassis Ground, Engine Block Ground to improve audio performance.


What type of Battery Terminals to use for the wire
What type of cable/wire
What gauge do you suggest
What points would you recommend to upgrade

Looking for a distributor that would sell terminals that are worth while, I see many cheap terminals and some which are extremely expensive to connect the wires to a battery, most seem to be a rip off where people buy for the hype.

From my few years in wiring homes, I know of gauges for wiring, curious though as I see some recommending 2 gauge/ 0 gauge for these grounding points. The wire is extremely stiff and was wondering what you recommend.

Also, would ask for any suggestions on antennas for a Nissan to replace the long antennas, it was a fixed antenna non powered and would like something small, less of an eyesore.

Any help and information is appreciated and do you suggest any forums for car audio that you frequently visit or read for information?
I use IXOS for my really nice wiring/connector product and also some Stinger product. There is a HUGE difference quality of wire. Most of the car audio power cable out there is not solid copper. And anything that is cheap in price probably uses the Chinese system for rating the gauge. I have some 4 gauge Walmart/Ebay brand power wire at the shop that is smaller than my IXOS 8 gauge wire I sell. Even IXOS's GT series power cable is twice the weight of their lower line power wire... same length, same gauge, same strand count. One is solid copper and one is copper clad. So for that very reason the XIOS 100 series 4 gauge for example will support 650 watts. While their 400 series 4 gauge will support 1400 watts... there's that big of a difference. I would hate to even guess what the Ebay 4 gauge will support

As for the wire being flexible are you talking about home wire? Because you absolutely cannot use AC power wire for 12 volts. For what it's worth my IXOS 4 gauge you can take and wrap around your pinky.

So you will want to upgrade the power cable from your alternator to the battery. Gauge will depend on what gauge you are running from the battery to the amplifier(s). If you are running 1/0 gauge to the amplifier(s) then you obviously want to run at least that big from the alternator to the battery. Same with ground... upgrade the battery ground to the chassis and block ground to the chassis.

As for the antenna, any length other than the standard 32"(which is 1/4 of a wavelength) will decrease reception.
__________________

Follow Along For My Latest Work
My Portfolio
Please Share
Check Out My Builds
Broadfield is offline   Reply With Quote
Old 02-28-2012, 06:16 PM   #89
killer skittle
Zilvia Member
 
Join Date: Sep 2010
Location: ga
Age: 36
Posts: 219
Trader Rating: (0)
killer skittle is an unknown quantity at this point
Feedback Score: 0 reviews
How has the SEM paint/dye you used on interior pieces help up? How long have you used it? I would LOVE to redo my dash, center, and door panels with that stuff. Just think a year or two in the sun and it would be worse off than it is now. Do you just use wax/grease remover then spray a coat on?
killer skittle is offline   Reply With Quote
Old 02-28-2012, 07:27 PM   #90
chiboy002
Post Whore!
 
Join Date: Mar 2010
Location: ◙
Posts: 4,416
Trader Rating: (21)
chiboy002 is an unknown quantity at this point
Feedback Score: 21 reviews
hey toby
i'll give you a call tomorrow to go over some stuff if thats ok but for now, and i'll prolly forget this post ever posted lol, but

what do you use for the 200mL applicator gun for the 3M seam sealer?
i derped a little bit and forgot i needed an applicator gun before i bought it, and its like 200 god damn dollars. Any recommendations on something cheaper? This is probably the only time i'll ever use it, so don't want to drop that much on it.
__________________
street dancer.
chiboy002 is offline   Reply With Quote
Reply

Bookmarks

Tags
broadfield, toby


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:02 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™