Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 03-14-2012, 09:57 PM   #1
RandallSharp
Zilvia Member
 
RandallSharp's Avatar
 
Join Date: Oct 2011
Location: Ohio
Age: 29
Posts: 183
Trader Rating: (0)
RandallSharp is an unknown quantity at this point
Feedback Score: 0 reviews
Brake Tune-up

Hey guys, my front brakes are shot to crap on my s13 and so is my passenger ball joint. I'm on a restrictive budget, but I think I've finally put together the parts I'm going to get. Before I buy them, can I get some feedback to determine if this is the right route and worth the upgrade?

RAYBESTOS 507-1311 Control Arm/Ball Joint Assy | eBay

Centric Parts 105.07000 Front Original Equipment Ceramic Pads | eBay

Centric Parts 121.42041 Front Disc Brake Rotor | eBay

My concern with the rotors, is that it does not specify if it's for ABS or not. How do I tell? I do not have ABS.

As for the pads, I don't believe it comes with shims and I cannot find the kit it requires. Does it actually come with shims or should I avoid these for that reason?

If you were going to do this, would you recommend different parts? I would like to end up paying no more than $150 for everything.

Thanks for reading.
__________________
1991 240sx Hatch Daily'd!
RandallSharp is offline   Reply With Quote
Sponsored Links
Old 03-14-2012, 10:05 PM   #2
KiLLeR2001
Post Whore!
 
Join Date: Jun 2007
Location: オーランドフロリダ
Posts: 7,955
Trader Rating: (46)
KiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud of
Feedback Score: 46 reviews
Autozone for pads / rotors.

Duralast/Brake Rotor - Front (3215) | 1991 Nissan/Datsun 240SX 4 Cylinders M 2.4L SFI DOHC | AutoZone.com

Duralast/Brake Pads - Front (MKD422) | 1991 Nissan/Datsun 240SX 4 Cylinders M 2.4L SFI DOHC | AutoZone.com

pdm-racing.com for the control arms.

PDM Racing - Specials
__________________
KiLLeR2001 is offline   Reply With Quote
Old 03-14-2012, 10:34 PM   #3
zo0d
Zilvia Member
 
zo0d's Avatar
 
Join Date: Apr 2008
Location: New Jersey
Age: 31
Posts: 259
Trader Rating: (1)
zo0d is on a distinguished road
Feedback Score: 1 reviews
Go to advanceautoparts.com

I just added all your items and entered the coupon code:MA30. It came out to 125.83. You also get a $50 coupon towards your next purchase of $100 or more.

Order the parts online and then pick them up at the store.
zo0d is offline   Reply With Quote
Old 03-14-2012, 10:53 PM   #4
RandallSharp
Zilvia Member
 
RandallSharp's Avatar
 
Join Date: Oct 2011
Location: Ohio
Age: 29
Posts: 183
Trader Rating: (0)
RandallSharp is an unknown quantity at this point
Feedback Score: 0 reviews
I can't afford $200 for the AutoZone and the nice control arms. I was looking at the specific setup because I know Centric makes StopTech and PowerSlot, so they must be of good quality. The Rotors are unbeatably priced and I was aiming for ceramic pads. As for the LCA, I know Raybestos is good stuff. So my picks were really that bad you guys would recommend FailZone items over it?
__________________
1991 240sx Hatch Daily'd!
RandallSharp is offline   Reply With Quote
Old 03-14-2012, 11:36 PM   #5
KiLLeR2001
Post Whore!
 
Join Date: Jun 2007
Location: オーランドフロリダ
Posts: 7,955
Trader Rating: (46)
KiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud of
Feedback Score: 46 reviews
Quote:
Originally Posted by RandallSharp View Post
I can't afford $200 for the AutoZone and the nice control arms. I was looking at the specific setup because I know Centric makes StopTech and PowerSlot, so they must be of good quality. The Rotors are unbeatably priced and I was aiming for ceramic pads. As for the LCA, I know Raybestos is good stuff. So my picks were really that bad you guys would recommend FailZone items over it?
It's not that, its just you have to be careful from what you buy on eBay. I try to limit purchases on eBay as much as possible.

The rotors you chose are actually the ABS rotors. If you note, ABS rotors have a thickness of 22mm and non-ABS have a thickness of 19.89mm or ~20mm.
__________________
KiLLeR2001 is offline   Reply With Quote
Old 03-14-2012, 11:44 PM   #6
RandallSharp
Zilvia Member
 
RandallSharp's Avatar
 
Join Date: Oct 2011
Location: Ohio
Age: 29
Posts: 183
Trader Rating: (0)
RandallSharp is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by KiLLeR2001 View Post
It's not that, its just you have to be careful from what you buy on eBay. I try to limit purchases on eBay as much as possible.

The rotors you chose are actually the ABS rotors. If you note, ABS rotors have a thickness of 22mm and non-ABS have a thickness of 19.89mm or ~20mm.
Well what I actually did was do all of my researching on Google and found out the part numbers on RockAuto.com. I've been desperately researching for 3 days to no avail, lol. I figure if they title it a name brand, have sold some, and have a good rating, it's probably legit. I've used eBay a good amount and I've always been satisfied.

As for the ABS thickness, that is something I was not aware of. Truly appreciate the information, I'll look for non-ABS rotors

EDIT: I found these on eBay and I've been researching them. Everyone seems happy with them. Any opinions?

http://www.ebay.com/itm/FRONT-REAR-K...ht_6325wt_1396
__________________
1991 240sx Hatch Daily'd!

Last edited by RandallSharp; 03-15-2012 at 03:38 PM..
RandallSharp is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™