s13 wire tuck+fuse & relay boxes re-location - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

mastadon · 05-23-2009, 09:27 AM

god, i just look at that and get a headache. Can't wait to see how this turns out, I'll try and learn from your mistakes (if you make any).

mdbizman87 · 05-28-2009, 01:23 PM

LOL i know right, I work with electrical aspects of cars too and Im just like WTF! I want to do a battery relocation in my S13 and a wire tuck but looks im in deff gunna need some more experience for this or someone who deff knows what their doing lol.

GSXRJJordan · 05-28-2009, 01:46 PM

I keep checking these threads just to see what the "general level of interest" is on this stuff.

As I'm doing my RB25 rebuild/swap, I'm doing a full tuck on the upper harness (already removed all the wires/box/etc from the engine bay) and using a Tyco Mil-Spec bulkhead connector to separate engine-bay from interior halves. I've found that only 33 wires need to actually pass through the firewall

As far as the interior, I've got a 10-circuit fusebox handling my Accessories and a 6-circuit taking care of Ignition-switched duties, all hiding out under my passenger airbag. On the back side of that plate is the relay logic for push-button start and my fuel pump/fan relays. The car has no body harness, only 12 or so wires running back through the car for tail lights/fuel pump/stereo.

Pics in a couple days.

hpipro4 · 05-28-2009, 03:06 PM

almost done with mine.....

hpipro4 · 06-03-2009, 11:05 PM

heres some update.....cant finish cause im waiting for techflex wire sleeves from partexpress.com shipping is way too slow!!!grrrr

tested out electronics everything seems to be workin....music was bumpin...lights...etc..

heres more pics:::

Bobafreak · 06-06-2009, 01:28 AM

To many wires for me. i would have a anxiety attack.

hpipro4 · 06-09-2009, 07:11 PM

so i installed my dcc took me a while to figure out what i did wrong. tips: dont unplug the blue relay, only unplug the black relay!

also tested my s13 digital cluster...well no luck getting the mph....it did once turn on then slowly faded but its gone....

test fitted the obx header fits awesome w/o egr n secondary air!

littledevil661 · 06-09-2009, 08:03 PM

damn lookin good.. wish i had time to do it on mine.. i think imma have to do it the way you did.. looks like you save alot of money reusing plugs .. milspec is to rich for my pocket right now

hpipro4 · 06-09-2009, 08:08 PM

Quote:

Originally Posted by littledevil661

damn lookin good.. wish i had time to do it on mine.. i think imma have to do it the way you did.. looks like you save alot of money reusing plugs .. milspec is to rich for my pocket right now

oh yea i didnt think about using aftermarket connectors....just buy plenty of wire sleeves 1/8", 1/4", 3/8", variety of heat shrinks, 3m electric tape, time and patient...lol

littledevil661 · 06-09-2009, 08:10 PM

Quote:

Originally Posted by hpipro4

oh yea i didnt think about using aftermarket connectors....just buy plenty of wire sleeves 1/8", 1/4", 3/8", variety of heat shrinks, 3m electric tape, time and patient...lol

i have loads of heat shrink and some wire loom left for my last car . just have to find time to do mine..prolly do it when i finish my auto to manual conversion.. not fun

hpipro4 · 06-09-2009, 08:13 PM

Quote:

Originally Posted by littledevil661

i have loads of heat shrink and some wire loom left for my last car . just have to find time to do mine..prolly do it when i finish my auto to manual conversion.. not fun

maybe if you bought a 5spd instead of auto then you would be doing this now!!!lol

D1S13 · 06-09-2009, 08:17 PM

Good job! !

S14Cuhh · 06-09-2009, 08:38 PM

looking good.

GSXRJJordan · 06-09-2009, 08:53 PM

I should be finishing my upper and lower RB25 engine harnesses this week, using mil-spec circular connectors and Maringo power connectors, all wrapped in Techflex sleeve. Spent way too much money lol, but hopefully will be bomb. The rest of the car just needs to be wrapped/heat shrinked (got lazy and didn't want to de-pin all the connectors).

Om1kron · 06-09-2009, 09:44 PM

ahahahah down with de-pinning connectors lol.

hpipro4 · 06-09-2009, 11:38 PM

the finished fuse panels!

littledevil661 · 06-10-2009, 05:33 PM

Quote:

Originally Posted by hpipro4

maybe if you bought a 5spd instead of auto then you would be doing this now!!!lol

lol i tryed but i couldnt find one.. well more like i didnt have alot of cash .. but i did have one lined up and i was going to get it the next day and the kid hit me up saying .. would you be mad if i sold the car .. so i had to get the auto.. but its ok .. i got everything for it now.. just gotta work on it .. but i have some tricks up my sleeve on my build just have to get a camera to start taking pics of it on the rebuild/bodywork/headache

hpipro4 · 06-10-2009, 10:12 PM

Quote:

Originally Posted by littledevil661

lol i tryed but i couldnt find one.. well more like i didnt have alot of cash .. but i did have one lined up and i was going to get it the next day and the kid hit me up saying .. would you be mad if i sold the car .. so i had to get the auto.. but its ok .. i got everything for it now.. just gotta work on it .. but i have some tricks up my sleeve on my build just have to get a camera to start taking pics of it on the rebuild/bodywork/headache

did you atleast did a tuck on the engine harness since you have to swapout ecu and engine harness?? or did u?

littledevil661 · 06-11-2009, 10:44 AM

Quote:

Originally Posted by hpipro4

did you atleast did a tuck on the engine harness since you have to swapout ecu and engine harness?? or did u?

, nope dont have to swap out the ecu or harness. i have a kaDE24 motor not the crap sohc. another reason why i picked up the auto

hpipro4 · 06-11-2009, 12:18 PM

Quote:

Originally Posted by littledevil661

, nope dont have to swap out the ecu or harness. i have a kaDE24 motor not the crap sohc. another reason why i picked up the auto

you mean KA24DE not kade24! lol

littledevil661 · 06-12-2009, 04:32 PM

Quote:

Originally Posted by hpipro4

you mean KA24DE not kade24! lol

lol woops that too.. i was typing halfway asleep.. .. have you fired up the car yet since you redid alot of it and how does your bay look now

hpipro4 · 06-13-2009, 01:58 AM

Quote:

Originally Posted by littledevil661

lol woops that too.. i was typing halfway asleep.. .. have you fired up the car yet since you redid alot of it and how does your bay look now

hahah....no i havent fired up the engine yet!!cross fingers hope it does fire up!!!i need to bolt on my header, slap on my jvt r33 radiator that i modded so it fits, drop in aem short ram then try to fire it up...

jbuckley · 06-13-2009, 02:38 AM

clean.

i disassembled my relay box since i only used a couple out of it and just put them behind the radio where the other relays were located. good hiding spot , they dont really need to be accessible. i minimized my fuse panel and just tucked everything away all nice and pretty.

kind of wish i would have put my fusebox in my center console like my friends car , but didnt want to re run my harness AGAIN. idk i may get bored someday and move it ?

i cut a bunch of the wrong wires at some point and had all kinds of crazy mishaps , but it all is good now

hpipro4 · 06-13-2009, 03:02 AM

Quote:

Originally Posted by jbuckley

clean.

i disassembled my relay box since i only used a couple out of it and just put them behind the radio where the other relays were located. good hiding spot , they dont really need to be accessible. i minimized my fuse panel and just tucked everything away all nice and pretty.

kind of wish i would have put my fusebox in my center console like my friends car , but didnt want to re run my harness AGAIN. idk i may get bored someday and move it ?

i cut a bunch of the wrong wires at some point and had all kinds of crazy mishaps , but it all is good now

tips for you: label it!

jbuckley · 06-13-2009, 03:05 AM

learned the hard way.

benefits : knowing every wire and what and where it goes to by heart.

93nismo · 06-13-2009, 11:38 AM

lol i wish i had the patience to do all this... maybe someday. when im really bored. but then i might not be bored the next day... hmm. decisions decisions. i unno, id probably get lost half way through anyway

hpipro4 · 06-13-2009, 01:27 PM

Quote:

Originally Posted by 93nismo

lol i wish i had the patience to do all this... maybe someday. when im really bored. but then i might not be bored the next day... hmm. decisions decisions. i unno, id probably get lost half way through anyway

hahah thats why i did mine! was bored one day so i started with the engine harness and then decided mine as well do the rest so i did.

i didnt use the wiring diagrams that much but only wires i miss labeled just to make sure it goes where is suppose to go.

even removed wires for cruise control, rear wiper..etc

littledevil661 · 06-13-2009, 09:45 PM

Quote:

Originally Posted by hpipro4

hahah....no i havent fired up the engine yet!!cross fingers hope it does fire up!!!i need to bolt on my header, slap on my jvt r33 radiator that i modded so it fits, drop in aem short ram then try to fire it up...

sweet its coming together like butt cheeks

hpipro4 · 06-16-2009, 03:06 AM

dcc install w/high power smd's

*Wake* · 06-16-2009, 03:33 AM

Quote:

Originally Posted by hpipro4

dcc install w/high power smd's

where did you get those? how did you do it? and do they have other colors?

oh and props on the tuck its coming along nicely, I just got through stripping my eentire interior harness. gets kinda hectic.

05-28-2009, 01:46 PM	#33
GSXRJJordan Post Whore! Join Date: May 2006 Location: << 626 >> Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	I keep checking these threads just to see what the "general level of interest" is on this stuff. As I'm doing my RB25 rebuild/swap, I'm doing a full tuck on the upper harness (already removed all the wires/box/etc from the engine bay) and using a Tyco Mil-Spec bulkhead connector to separate engine-bay from interior halves. I've found that only 33 wires need to actually pass through the firewall As far as the interior, I've got a 10-circuit fusebox handling my Accessories and a 6-circuit taking care of Ignition-switched duties, all hiding out under my passenger airbag. On the back side of that plate is the relay logic for push-button start and my fuel pump/fan relays. The car has no body harness, only 12 or so wires running back through the car for tail lights/fuel pump/stereo. Pics in a couple days. __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

06-06-2009, 01:28 AM	#36
Bobafreak Nissanaholic! Join Date: Jul 2007 Location: 909 Posts: 2,207 Trader Rating: (17) Feedback Score: 17 reviews	To many wires for me. i would have a anxiety attack. __________________ *VIOLENT RUNNING TRIBE* "Love is god, hatin is satin!"

06-09-2009, 08:03 PM	#38
littledevil661 Leaky Injector Join Date: Feb 2009 Location: wack ass palmdale Age: 37 Posts: 124 Trader Rating: (2) Feedback Score: 2 reviews	damn lookin good.. wish i had time to do it on mine.. i think imma have to do it the way you did.. looks like you save alot of money reusing plugs .. milspec is to rich for my pocket right now __________________ Need parts or your car sprayed, PM me for Details

06-09-2009, 08:17 PM	#42
D1S13 Zilvia Addict Join Date: May 2007 Location: phx Posts: 830 Trader Rating: (9) Feedback Score: 9 reviews	Good job! ! __________________ www.teamtopflight.blogspot.com

06-09-2009, 08:53 PM	#44
GSXRJJordan Post Whore! Join Date: May 2006 Location: << 626 >> Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	I should be finishing my upper and lower RB25 engine harnesses this week, using mil-spec circular connectors and Maringo power connectors, all wrapped in Techflex sleeve. Spent way too much money lol, but hopefully will be bomb. The rest of the car just needs to be wrapped/heat shrinked (got lazy and didn't want to de-pin all the connectors). __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

05-23-2009, 09:27 AM	#31
mastadon Leaky Injector Join Date: Dec 2003 Location: usa Posts: 117 Trader Rating: (1) Feedback Score: 1 reviews	god, i just look at that and get a headache. Can't wait to see how this turns out, I'll try and learn from your mistakes (if you make any).

05-28-2009, 01:23 PM	#32
mdbizman87 Join Date: Mar 2008 Location: Maryland Age: 33 Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	LOL i know right, I work with electrical aspects of cars too and Im just like WTF! I want to do a battery relocation in my S13 and a wire tuck but looks im in deff gunna need some more experience for this or someone who deff knows what their doing lol.

05-28-2009, 03:06 PM	#34
hpipro4 Zilvia FREAK! Join Date: Dec 2008 Location: norcal 530 Posts: 1,003 Trader Rating: (71) Feedback Score: 71 reviews	almost done with mine.....

06-03-2009, 11:05 PM	#35
hpipro4 Zilvia FREAK! Join Date: Dec 2008 Location: norcal 530 Posts: 1,003 Trader Rating: (71) Feedback Score: 71 reviews	heres some update.....cant finish cause im waiting for techflex wire sleeves from partexpress.com shipping is way too slow!!!grrrr tested out electronics everything seems to be workin....music was bumpin...lights...etc.. heres more pics:::

06-09-2009, 07:11 PM	#37
hpipro4 Zilvia FREAK! Join Date: Dec 2008 Location: norcal 530 Posts: 1,003 Trader Rating: (71) Feedback Score: 71 reviews	so i installed my dcc took me a while to figure out what i did wrong. tips: dont unplug the blue relay, only unplug the black relay! also tested my s13 digital cluster...well no luck getting the mph....it did once turn on then slowly faded but its gone.... test fitted the obx header fits awesome w/o egr n secondary air!

06-09-2009, 08:38 PM	#43
S14Cuhh Zilvia FREAK! Join Date: Mar 2008 Location: 562 Posts: 1,365 Trader Rating: (23) Feedback Score: 23 reviews	looking good.

06-09-2009, 09:44 PM	#45
Om1kron Post Whore! Join Date: Sep 2004 Location: Simi Valley, CA Age: 40 Posts: 6,879 Trader Rating: (15) Feedback Score: 15 reviews	ahahahah down with de-pinning connectors lol. __________________ Wayne

06-09-2009, 11:38 PM	#46
hpipro4 Zilvia FREAK! Join Date: Dec 2008 Location: norcal 530 Posts: 1,003 Trader Rating: (71) Feedback Score: 71 reviews	the finished fuse panels!

06-13-2009, 02:38 AM	#53
jbuckley BANNED Join Date: Oct 2007 Location: Land of Riche$ Posts: 297 Trader Rating: (4) Feedback Score: 4 reviews	clean. i disassembled my relay box since i only used a couple out of it and just put them behind the radio where the other relays were located. good hiding spot , they dont really need to be accessible. i minimized my fuse panel and just tucked everything away all nice and pretty. kind of wish i would have put my fusebox in my center console like my friends car , but didnt want to re run my harness AGAIN. idk i may get bored someday and move it ? i cut a bunch of the wrong wires at some point and had all kinds of crazy mishaps , but it all is good now

06-13-2009, 03:05 AM	#55
jbuckley BANNED Join Date: Oct 2007 Location: Land of Riche$ Posts: 297 Trader Rating: (4) Feedback Score: 4 reviews	learned the hard way. benefits : knowing every wire and what and where it goes to by heart.

06-13-2009, 11:38 AM	#56
93nismo Zilvia Addict Join Date: Dec 2008 Location: sycamore il Posts: 765 Trader Rating: (14) Feedback Score: 14 reviews	lol i wish i had the patience to do all this... maybe someday. when im really bored. but then i might not be bored the next day... hmm. decisions decisions. i unno, id probably get lost half way through anyway

06-16-2009, 03:06 AM	#59
hpipro4 Zilvia FREAK! Join Date: Dec 2008 Location: norcal 530 Posts: 1,003 Trader Rating: (71) Feedback Score: 71 reviews	dcc install w/high power smd's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode