JBB

Hey, question..

I bought the new tomei turbo outlet/elbow from enjuku back on feb 12th. It finally came in yesterday and I was super excited to check it out. It looks sick, very good quality. But, I started cross referencing a photo of the elbow from frsport and it seems that mine is missing welds on the flange that mates to the turbo, in the 3 grooves that allow the studs to fit. I'm using tapatalk at work so I will try attaching all the photos..

Should I be concerned about this? The grooves are bigger than a fingernail. You think this one was rushed/ not qc'ed?ImageUploadedByTapatalk1399468319.527372.jpg


Sent from my iPhone using Tapatalk

JBB

Trying to attach my photos now but keeps timing out
ImageUploadedByTapatalk1399468512.553531.jpg
ImageUploadedByTapatalk1399468535.874762.jpg


Sent from my iPhone using Tapatalk

indomiekid1

i'd ask the ken about that, they have awesome customer service.

Dboyizmlg

That's a nice elbow outlet! I have the early version tomei outlet, it's a bit different from yours.

As to the welds, I would suggest you check up with enjuku.
Quick question did the elbow come in a tomei box?

Driftwire

http://www.tomeiusa.com/_2003web-cat...hikaku08_b.jpg

In this picture it kind of looks like its missing a weld there. but not sure.

__________________

living4surf

the one i have and the other i have seen is missing the weld there also its very tight getting a bolt in there my guess is that with the weld they couldnt get it to sit right

JBB

Yes it came in a tomei box with all the accessories -- 4 stickers, 3 studs, some nuts, o2 sensor adapter, rubber cap for the o2 sensor bung, a hose clamp, tube of something, instructions. May be forgetting something, but I am pretty sure it's legit.

Thanks for the responses. I posted this on enjukus Facebook last night, if I don't hear from them on there I'll give them a call. It's just weird that the picture from frsport shows welds in that one groove. There weren't pictures of the inside grooves though


Sent from my iPhone using Tapatalk

smartoss

Is it welded at all on the inside maybe?

JBB

Enjuku Racing
James, there should be no issue with the turbo outlet from tomei. Look inside the tunnel and see if you notice any cracks or gaps. Tomei has changed the procedure on how they weld the outlets and i can reassure you that you wont have any issues. If there is any issues feel free to give us a call 1.888.SR.20DET. mon-fri and we will be more than happy to help you out.



Sent from my iPhone using Tapatalk

tricky_ab

Tomei had re-enginerred their elbows, so it looks like the new updated ones have FINALLY made it out to the market.

__________________
Instagram

Back for round two... 4 doors this time around...

fliprayzin240sx

Hmm...still weird how they didnt weld it all the way around. Does the elbow sit inside the flange or on top? Can you get a picture of the inside? Curious if it slips inside the flange now so they dont really have to weld it all way around.

__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!

jr_ss

I wouldn't doubt that it's welded on the inside of the flange. Any pictures of the inside of that area?

__________________
My SR20VET

BoostSlideWayz

Seems kinda odd that there is no welds in where the bolt holes are. Seems like that would possibly cause the weld to crack right at those locations if any did crack in the first place it would probably start there.

I don't really question tomei at all because i love their products and quality of them. But its kind of funny because if this were any other company that did the same type of design ( not welding sections like that ) people would probably say have it welded. Or they would say its a crap manifold.

__________________
1994 toyota supra...... n-a D=
1992 nissan 240sx KA24E-T fully Built =D

BossHogg

it would have to be welded on the inside.....or else it would leak lol. It's most likely welded on the inside and been smoothed over. Basic flange welding practice....weld both sides.

__________________

JBB

You all are correct, it's welded on the inside and smoothed over. I'll snap a picture after work today. It really is a nice piece and I didn't even notice that area at first.

I trust tomei and you all saw enjukus response to my inquiry, if there are any issues they will help me out. It should be alright.

I will note however, one of the stud holes is not perfect and I'm going to have to drill it out, ever so slightly, for it to mate up to the turbo. I am a little disappointed about that. I'll take a picture of that as well


Sent from my iPhone using Tapatalk

living4surf

I have bo problem on mine or the other one I have seen on the bolt holes. Mounted perfectly

JBB

ImageUploadedByTapatalk1399582283.849312.jpgImageUploadedByTapatalk1399582303.516546.jpg


Sent from my iPhone using Tapatalk

Michael E

Its fine, supposed to be like that