Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 10-24-2012, 12:53 PM   #1
cb7tuner
Leaky Injector
 
Join Date: Jan 2011
Location: ga
Age: 33
Posts: 51
Trader Rating: (1)
cb7tuner is an unknown quantity at this point
Feedback Score: 1 reviews
RB26 safc in/out settings

About to go pick up a s14 with a RB26 swap in it tomorrow but the owner recently put a n62 z32 maf on it and installed a safc neo when his original maf burnt up. He said the car starts fine but feels boggy while driving. What is the correct in/out setting for the rb26 with n62 maf. Oh if it matters he said it is an r32 rb26 with a single maf
cb7tuner is offline   Reply With Quote
Sponsored Links
Old 10-24-2012, 01:19 PM   #2
fliprayzin240sx
Man w/ CTSV & a Car Seat
 
fliprayzin240sx's Avatar
 
Join Date: Aug 2002
Location: Tampa
Posts: 17,998
Trader Rating: (19)
fliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfection
Feedback Score: 19 reviews
Send a message via AIM to fliprayzin240sx
2/6 is usually the setting for Z Mafs. If that doesnt work, try 2-5, but I'm almost 100% sure its 2/6.
__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!
fliprayzin240sx is offline   Reply With Quote
Old 10-24-2012, 01:42 PM   #3
cb7tuner
Leaky Injector
 
Join Date: Jan 2011
Location: ga
Age: 33
Posts: 51
Trader Rating: (1)
cb7tuner is an unknown quantity at this point
Feedback Score: 1 reviews
thanks man hopefully that will work, i know my SR with n62 maf is 2 IN 6 OUt , just didnt know with it being a 6 cyl RB26 if it would be different
cb7tuner is offline   Reply With Quote
Old 10-24-2012, 02:33 PM   #4
sblack13
Zilvia FREAK!
 
sblack13's Avatar
 
Join Date: May 2005
Location: Seattle
Age: 34
Posts: 1,016
Trader Rating: (10)
sblack13 has much to be proud ofsblack13 has much to be proud ofsblack13 has much to be proud ofsblack13 has much to be proud ofsblack13 has much to be proud ofsblack13 has much to be proud ofsblack13 has much to be proud ofsblack13 has much to be proud ofsblack13 has much to be proud ofsblack13 has much to be proud ofsblack13 has much to be proud of
Feedback Score: 10 reviews
Hi, just to add your 2in5out is usually for S14 motor w/z maf.
sblack13 is offline   Reply With Quote
Old 10-25-2012, 08:34 AM   #5
fliprayzin240sx
Man w/ CTSV & a Car Seat
 
fliprayzin240sx's Avatar
 
Join Date: Aug 2002
Location: Tampa
Posts: 17,998
Trader Rating: (19)
fliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfection
Feedback Score: 19 reviews
Send a message via AIM to fliprayzin240sx
Yah, thats the only thing I'm not 100% about, since its on an RB and its an RB26 at that. The whole 2 stock MAF is what's I'm not sure about but you said this ones already converted to 1 single MAF.

Also, when you set to the same number on both side, thats usually the setting for stock MAFs. So you can set 1/1, 2/2, 3/3, etc for stock MAFs. With that said, I'm curious what it was set to originally with the single MAF conversion...
__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!
fliprayzin240sx is offline   Reply With Quote
Old 10-26-2012, 02:43 PM   #6
steve shadows
Post Whore!
 
steve shadows's Avatar
 
Join Date: Aug 2003
Location: LA and OC
Posts: 8,202
Trader Rating: (5)
steve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfection
Feedback Score: 5 reviews
Send a message via AIM to steve shadows
Quote:
Originally Posted by fliprayzin240sx View Post
Yah, thats the only thing I'm not 100% about, since its on an RB and its an RB26 at that. The whole 2 stock MAF is what's I'm not sure about but you said this ones already converted to 1 single MAF.

Also, when you set to the same number on both side, thats usually the setting for stock MAFs. So you can set 1/1, 2/2, 3/3, etc for stock MAFs. With that said, I'm curious what it was set to originally with the single MAF conversion...
Should be 2-5....but again I hate AFCs...you're better off hitting yourself in the face with a hammer. Invest in the PFC, even a used one, a dusty ugly one from a junk yard or an old front clip, L-Jetro is even better. You'll thank me later...or you won't and you'll have a blown motor in a matter of time. AFCs are crap on Hot Wire Maf Cars. Sorry to be so blunt but passionate about it because I personally lost motors on my cars back in the day (2003) we still ran low 12s but screwing with the input for the MAF signal is not real tuning and is dangerous and throw extra resistance down the line to the ecm too. Just a few words of advice. Sorry if this breaks your heart too.
__________________
Like Me on FaceBook !
steve shadows is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:40 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™