Trans Grinding KA DE - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Driftwire · 08-03-2013, 12:46 PM

My Ka Trans will grind when getting out of a gear or going into a gear and sometimes if im holding the clutch pedal down at a light it will just AHDAKFAHDSASD as if the clutch said "F you" and just drops or something. Sounds like a syncro grind but i dont know what could be wrong. Any1 have any idea? I will try to get a video of the noise when the rain stops..

m_240sx · 08-03-2013, 12:47 PM

Release bearing?

Sent from my HTC6435LVW using Tapatalk 2

Driftwire · 08-03-2013, 01:07 PM

I dont know how to check it

awgdawg · 08-04-2013, 12:07 PM

Could be clutch slave cylinder. My civics was going bad and it would do shit like that. Check the clutch fluid and see if the problem gets better if you pump the clutch a couple times. If the fluids not low it could still be the slave.

Driftwire · 08-07-2013, 01:10 PM

Brand new slave was put on and only has 250 miles on it

sleepyS14se · 08-07-2013, 02:48 PM

Quote:

Originally Posted by Driftwire

My Ka Trans will grind when getting out of a gear or going into a gear and sometimes if im holding the clutch pedal down at a light it will just AHDAKFAHDSASD as if the clutch said "F you" and just drops or something.

this made me lol so hard....ahdhsdgrrkksd sound? LMAO

you may have a bad synchro

*Wookie384* · 08-07-2013, 07:42 PM

Wait so when you hold the clutch pedal down at a light with the trans in gear, it will drop the clutch? Check the slave and master cylinders to see if they are working properly, try bleeding it again. How is the clutch engagement? Is it at the top or bottom? If the slave and master cylinders are good and the clutch engages at the top it just may be the clutch taking a shit.

Driftwire · 08-19-2013, 07:05 AM

Okay its sorted. The flywheel had 2 loose bolts on it. Also put new T/O bearing, clutch and pressure plate all in and she shifts like a buttered biscuit with some gravy. Slippity Slidin. Thanks guys for all the support.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-03-2013, 12:47 PM	#2
m_240sx Join Date: May 2013 Location: W/S nc Age: 35 Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	Release bearing? Sent from my HTC6435LVW using Tapatalk 2

08-04-2013, 12:07 PM	#4
awgdawg Join Date: Jun 2013 Location: Pa Posts: 41 Trader Rating: (0) Feedback Score: 0 reviews	Could be clutch slave cylinder. My civics was going bad and it would do shit like that. Check the clutch fluid and see if the problem gets better if you pump the clutch a couple times. If the fluids not low it could still be the slave.

08-07-2013, 07:42 PM	#7
Wookie384 Premium Member Join Date: May 2007 Location: N. Hollywood / Burbank Age: 36 Posts: 766 Trader Rating: (10) Rides Gallery: Wookie384 Feedback Score: 10 reviews	Wait so when you hold the clutch pedal down at a light with the trans in gear, it will drop the clutch? Check the slave and master cylinders to see if they are working properly, try bleeding it again. How is the clutch engagement? Is it at the top or bottom? If the slave and master cylinders are good and the clutch engages at the top it just may be the clutch taking a shit.