Will an SR downpipe fit on an S14 KA Manifold? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Aku777 · 04-20-2021, 10:52 AM

Hey, I was wondering if an SR downpipe would fit on an S14 KA Manifold, it really looks like it will. It seems like my s14 stock exhaust manifold exhaust flange sits a bit behind the steering column, just like the SR turbo elbow exhaust flange does.

I contacted Enjuku Racing about their SR Downpipe, but of course they said it will only fit on turbo applications since they wouldn't want to be held accountable so I could get a return on it.

Thank you for any input, I searched on this forum and saw 2 posts on it and just one accurate reply saying that "it'll fit", but I wanted to make sure so I don't waste my money.

spooled240 · 04-20-2021, 02:04 PM

I tried years ago and it didn't work. I do remember it being close enough that it could probably have worked with minimal modification.

Aku777 · 04-20-2021, 02:11 PM

Was it too close to the frame? ISR has a KA-T downpipe which is the sr downpipe except with a 2 inch extension to make it sit lower.

spooled240 · 04-20-2021, 05:30 PM

I remember being able to bolt it on half-assly because the angle of the flanges left a large gap. It might have also been interfering with the chassis also. This was like15 years ago..

Aku777 · 04-20-2021, 09:27 PM

Ah I see, thanks for the input. I may buy the KA-T Downpipe, it's supposed to be 2 inches longer on one end to get more clearance.

Do you still own a 240 by any chance?

spooled240 · 04-23-2021, 08:54 AM

Quote:

Originally Posted by Aku777

Ah I see, thanks for the input. I may buy the KA-T Downpipe, it's supposed to be 2 inches longer on one end to get more clearance.

Do you still own a 240 by any chance?

Yep, still have the s14

srh666 · 04-23-2021, 10:21 AM

All u need to do is cut & index a single 2bolt flange

04-20-2021, 10:52 AM	#1
Aku777 Join Date: Apr 2021 Location: Texas, USA Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Will an SR downpipe fit on an S14 KA Manifold? Hey, I was wondering if an SR downpipe would fit on an S14 KA Manifold, it really looks like it will. It seems like my s14 stock exhaust manifold exhaust flange sits a bit behind the steering column, just like the SR turbo elbow exhaust flange does. I contacted Enjuku Racing about their SR Downpipe, but of course they said it will only fit on turbo applications since they wouldn't want to be held accountable so I could get a return on it. Thank you for any input, I searched on this forum and saw 2 posts on it and just one accurate reply saying that "it'll fit", but I wanted to make sure so I don't waste my money.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-20-2021, 02:04 PM	#2
spooled240 Post Whore! Join Date: Mar 2008 Location: San Diego, CA Posts: 4,138 Trader Rating: (27) Feedback Score: 27 reviews	I tried years ago and it didn't work. I do remember it being close enough that it could probably have worked with minimal modification.

04-20-2021, 02:11 PM	#3
Aku777 Join Date: Apr 2021 Location: Texas, USA Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Was it too close to the frame? ISR has a KA-T downpipe which is the sr downpipe except with a 2 inch extension to make it sit lower.

04-20-2021, 05:30 PM	#4
spooled240 Post Whore! Join Date: Mar 2008 Location: San Diego, CA Posts: 4,138 Trader Rating: (27) Feedback Score: 27 reviews	I remember being able to bolt it on half-assly because the angle of the flanges left a large gap. It might have also been interfering with the chassis also. This was like15 years ago..

04-20-2021, 09:27 PM	#5
Aku777 Join Date: Apr 2021 Location: Texas, USA Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Ah I see, thanks for the input. I may buy the KA-T Downpipe, it's supposed to be 2 inches longer on one end to get more clearance. Do you still own a 240 by any chance?

04-23-2021, 10:21 AM	#7
srh666 Zilvia Member Join Date: Feb 2013 Location: TAMPA fl Posts: 204 Trader Rating: (1) Feedback Score: 1 reviews	All u need to do is cut & index a single 2bolt flange