Rod knock? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Enders.S13 · 11-13-2012, 01:23 AM

The motor is a 94 KA and I'm not sure if I have a rod knock or not. The motor sounds fine at idle buts starts making a tapping noise while accelerating. I checked the oil and its not glittery and it doesn't contain metal shavings. I was thinking since I do have a timing chain rattle, maybe it's the chain slapping around? Because it sounds like the sound is coming from the head maybe. Any help would be appreciated.

beems240sx · 11-13-2012, 07:54 AM

pull the valve cover off quick and check. takes 10 minutes to pull it and put it back on. knock will be a deeper sound, search youtube videos of knock and compare. i would not really advise trying to continue to make the noise if it is knock. wouldnt want to damage the crank any further past machinability if it is fixable now.

Mikester · 11-13-2012, 07:57 AM

Could be an exhaust leak. Check your mani & frontpipe. If you think it's the timing chain slapping, take the valve cover off & look... there will be marks (usually) on the inside of it where it is making contact.

Doesn't sound like rod knock to me.

Silentoreo34 · 11-13-2012, 08:14 AM

In for videos

*popcorn*

Enders.S13 · 11-14-2012, 05:55 PM

I'll be posting a video tomorrow. Thanks for the help so far.

11-13-2012, 01:23 AM	#1
Enders.S13 Join Date: Feb 2012 Location: Phoenix, AZ Age: 27 Posts: 40 Trader Rating: (0) Feedback Score: 0 reviews	Rod knock? The motor is a 94 KA and I'm not sure if I have a rod knock or not. The motor sounds fine at idle buts starts making a tapping noise while accelerating. I checked the oil and its not glittery and it doesn't contain metal shavings. I was thinking since I do have a timing chain rattle, maybe it's the chain slapping around? Because it sounds like the sound is coming from the head maybe. Any help would be appreciated.

11-13-2012, 07:54 AM	#2
beems240sx Zilvia FREAK! Join Date: Jun 2008 Location: Phoenix Posts: 1,135 Trader Rating: (10) Feedback Score: 10 reviews	pull the valve cover off quick and check. takes 10 minutes to pull it and put it back on. knock will be a deeper sound, search youtube videos of knock and compare. i would not really advise trying to continue to make the noise if it is knock. wouldnt want to damage the crank any further past machinability if it is fixable now. __________________

11-13-2012, 07:57 AM	#3
Mikester Nissanaholic! Join Date: Jun 2007 Location: Kathleen, GA Age: 50 Posts: 1,941 Trader Rating: (0) Feedback Score: 0 reviews	Could be an exhaust leak. Check your mani & frontpipe. If you think it's the timing chain slapping, take the valve cover off & look... there will be marks (usually) on the inside of it where it is making contact. Doesn't sound like rod knock to me. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-13-2012, 08:14 AM	#4
Silentoreo34 Zilvia Addict Join Date: Dec 2010 Location: Phoenix, AZ Age: 30 Posts: 630 Trader Rating: (28) Feedback Score: 28 reviews	In for videos popcorn

11-14-2012, 05:55 PM	#5
Enders.S13 Join Date: Feb 2012 Location: Phoenix, AZ Age: 27 Posts: 40 Trader Rating: (0) Feedback Score: 0 reviews	I'll be posting a video tomorrow. Thanks for the help so far.