Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 03-26-2017, 02:35 PM   #1
itsMikey
 
Join Date: Jun 2011
Location: Rancho Cucamonga, Ca
Age: 28
Posts: 33
Trader Rating: (0)
itsMikey is an unknown quantity at this point
Feedback Score: 0 reviews
hesitation/bogging/died and now no start

alright...so the 240 the other day, started hesitating and bogging out all over the place and was idling rough. then it just died.

but now. the ecu's red indicator light isn't lighting up and the car still thinks the key is in the on position (dash on/seat belts retract when door is closed) it just started doing this when i went to go check the codes.

i can smell fuel a little bit on the intake side after i try to start it also...

and of course no start...just cranks

i can hear the fuel pump prime and the alternator tested good.

i'm lost....
itsMikey is offline   Reply With Quote
Sponsored Links
Old 03-26-2017, 03:26 PM   #2
Juantwo3
Zilvia FREAK!
 
Juantwo3's Avatar
 
Join Date: Sep 2011
Location: DTFullerton
Age: 30
Posts: 1,101
Trader Rating: (20)
Juantwo3 is an unknown quantity at this point
Feedback Score: 20 reviews
Disconect the fuel line be sure you are getting fuel

Autozone sells cheap inline spark testers, make sure you have spark, start there.

Alternator has nothing to do with the car starting or not
__________________
GO DUCKS!!!!!!!!!
Juantwo3 is offline   Reply With Quote
Old 03-26-2017, 06:47 PM   #3
itsMikey
 
Join Date: Jun 2011
Location: Rancho Cucamonga, Ca
Age: 28
Posts: 33
Trader Rating: (0)
itsMikey is an unknown quantity at this point
Feedback Score: 0 reviews
checked the fuel line. it's getting to the rail.

i'll look and see about the inline tester

alternator wasn't plugged in causing the wierd gauges and seat belt thing. fixed that.
itsMikey is offline   Reply With Quote
Old 03-27-2017, 02:35 PM   #4
nisileighty
Zilvia FREAK!
 
nisileighty's Avatar
 
Join Date: Feb 2016
Location: Seattle, WA
Posts: 1,215
Trader Rating: (4)
nisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of light
Feedback Score: 4 reviews
Check if the plug under the passenger kick panel on the ECU connector that goes to the cluster is still hooked up. That connector has the cold start wire and the car will not start without it


Sent from my iPhone using Tapatalk
nisileighty is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:02 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™