Canaduh

To start things off. The car has never give me problems, it's a 1990 s13, and i swapped in a DE motor 2 years ago. Basically, i went to 711 to get a drink, came back out, car wouldn't start. I noticed the fuel pump wasn't priming, so i "hot wired" the fuel pump to make sure it worked, and tried starting the car after i checked to make sure it was getting fuel. Just cranked and cranked.
So at this point i figured something with my ECU was the problem, and had another one laying around. Put the ECU in, and disconnected the "hot wired" fuel pump, and then the fuel pump wouldn't turn on still, but when i hot wired the fuel pump back up, the car started.

So I tore my old ecu apart, (i'll post pictures when i get home) and theres a connection fried, and i looked up the pinout diagram of the ECU and it said it's for the ignition switch. SO my car died again today and it's doing the exact same thing. I'm going to go look at the ECU but im sure it's the same problem.

I don't know where to start. i'm going to check the ignition switch to see if it's shorting out or anything. But if anyone else has any ideas that might help me out, i'd appreciate it a lot.