Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-08-2020, 08:17 PM   #1
jungspike
 
Join Date: Jul 2015
Location: Colorado
Age: 51
Posts: 7
Trader Rating: (0)
jungspike is an unknown quantity at this point
Feedback Score: 0 reviews
SR20det Lean at WOT

Just got done with engine rebuild. Engine runs good accept at WOT it gets lean. Starts out at 11-ish at low RPms and climbs to 15-ish by 3 to 4k. Here is a Datascan of the data. Any ideas?



What we have:
• S13 SR20det Redtop with stock internals
• G28 Turbo
• Wablro 255 high pressure with dedicated 12 gage wires from battery
• MAF from Ebay (Chinese—checked for coronavirus)
• AEM AFR wide band O2
• EGR delete
• Charcoal canister delete (vent to atmosphere)
• No BOV (plan on adding after its running)
• Z32 370 CC injectors (purple and new)
• Z32 fuel filter
• ISR adjustable FPR
• Stock 62 ECU (opened up and confirmed stock)
• Wiring Specialties wiring harness
• Datascan
Electric fans (coming on at 160 deg F--need to adjust)
What we know:
• Timing verified at 15 BTDC (light and Datascan)
• Double checked CAS and mechanical timing
• Boost leak checked (20 psi)
• Compression: good
• Test TPS with Datascan (car off): 0.45 and 4.1 volts
• Vacuum leak: checked (with smoke)
• Fuel pressure jacked up to 70 psi, still leans out
• Checked exhaust leaks
• At Idle:
o Fuel pressure around 41 psi (set to 44 with engine off)
o RPMs: 900
o Vacuum: -20 Hg vacuum
o AAC at 10% when warm
o AFR around 14 to 15
o Alternator Volt: 14 (measured at alternator and battery)
o ECU voltage around 13.0 volts
o TPS showing closed on DataScan/Consult.
jungspike is offline   Reply With Quote
Sponsored Links
 

Bookmarks

Tags
lean, problems, rebuild, tuning


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:15 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™