|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
|
Thread Tools | Display Modes |
|
02-03-2017, 05:55 PM | #1 |
Zilvia Junkie
|
Ka24de sputtering issue
Car randomly started to sputter at high rpms maybe like 4K ish my maf is good and I just got a new o2 sensor I don't know what else could be the problem plugs are about a month old and everything else is new such as ignition coil, dizzy, fuel filter, fuel pump etc. some one help I wanna go sliding (
Sent from my iPhone using Tapatalk |
Sponsored Links |
02-03-2017, 07:39 PM | #3 |
Zilvia Junkie
|
|
02-03-2017, 07:48 PM | #4 |
Leaky Injector
|
I'm not a master tech but from experience to check my spark, fuel and air, you could have a simple vacuum line pinched or split for all you know. A good start would be to check all the stuff you replaced recently
Sent from my SM-G930V using Tapatalk |
02-04-2017, 07:49 PM | #6 |
Zilvia Junkie
|
So I did a little of ecu work today and got it to read code 55 which is (settings OK) and my car is still sputtering. It's not at a certain rpm now it's just sputtering at random I'm thinking it has something to do with fuel? Maybe injectors? Any inputs?
Sent from my iPhone using Tapatalk |
02-04-2017, 08:15 PM | #7 |
Leaky Injector
Join Date: Jun 2005
Location: Eastern Hemisphere
Posts: 123
Trader Rating: (0)
Feedback Score: 0 reviews
|
While the car is running try unplugging injectors 1 @ a time... If you unplug 1 and the sputter/idle doesn't change then you could have a dead injector. If it gets worse, that injector is working fine.
__________________
| 92 S13 Hatch | 92 S13 Coupe | 95 S14.5 | |
02-06-2017, 10:43 AM | #8 | |
Zilvia Junkie
|
Quote:
The idle of the car is fine it's only sputtering when I try to floor it, if I try to ease into it also it's fine just when I try to floor it the car starts to act like I have some sort of anti lag on it and my buddies even said it shot a flame when it was sputtering Sent from my iPhone using Tapatalk |
|
02-06-2017, 10:46 AM | #9 |
Zilvia Junkie
|
I've had this similar problem with the previous motor ( sohc ) and all I did was clean out gunk from top of injectors and it revved all the way up no break ups
Sent from my iPhone using Tapatalk |
02-09-2017, 01:57 PM | #16 |
Leaky Injector
|
Flush the tank, check fuel pump voltage to see if it's any good, check your fuel filter, if the filter did its job then you're gonna need to flush the fuel line and replace the filter again
Sent from my SM-G930V using Tapatalk |
03-27-2017, 02:15 AM | #17 |
Leaky Injector
Join Date: Jul 2014
Location: 562 California
Age: 25
Posts: 54
Trader Rating: (0)
Feedback Score: 0 reviews
|
Bro is your problem still going on I recommend changing all your fuel components check your fuel filter in the engine bay & see if it's filled with that
Sent from my iPhone using Tapatalk |
03-27-2017, 08:04 AM | #18 | |
Zilvia Junkie
|
Quote:
Yea I fixed the issue my injectors were never messed up, turns out the sand substance in my fuel tank was old gas so I took out the fuel tank and scraped off all the sand stuff from the walls and off the baffle then I hosed it down and scrubbed it all down to make sure I got most of it out and finally 4 fuel filters later the car is running fine Sent from my iPhone using Tapatalk |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|