|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
|
Thread Tools | Display Modes |
01-06-2013, 12:06 AM | #1 |
Zilvia Addict
Join Date: Jun 2011
Location: Maryville, TN
Age: 29
Posts: 830
Trader Rating: (3)
Feedback Score: 3 reviews
|
Apexi turbo timer help?
I got the Circuit Sports TT harness from FRsport, also I have the pdf manual for the TT.
I was reading through it about the 3 extra wires, the white, black and grey. I know grey goes to the Ebrake switch, black is ground and white, goes to the O2 wire going to the ECU, or so the manual says. I want it to give me A/F ratios. so my question is does the white wire actaully go to the O2 on the ECU, I've read that it taps in to the speed wire and also the tach signal? also that for it to work the ground has to be spliced into the ecu? btw, its a 89 hatch, with an kouki(I believe) s14 sr20det.
__________________
|
Sponsored Links |
01-07-2013, 12:10 AM | #3 |
Zilvia Addict
Join Date: Jun 2011
Location: Maryville, TN
Age: 29
Posts: 830
Trader Rating: (3)
Feedback Score: 3 reviews
|
thanks for the reply, did you ground it to the ecu? as the pic shows the dotted ground saying if you dont use the 02 signal, it was kinda confusing, do I have to do it that way?
__________________
|
01-07-2013, 12:38 AM | #4 |
Zilvia Junkie
|
Yea I tapped into a ground from the ecu and grounded the unit to it. I'm pretty sure it will still work fine if you ground it to the chassis.
__________________
|
01-07-2013, 06:39 PM | #6 |
Man w/ CTSV & a Car Seat
|
You have the PDF instructions and you cant follow it? It says right ground the black wire if NOT using the o2 sensor signal. Since you're using it, then tap it into the ground into the ECU.
|
01-12-2013, 06:16 PM | #7 |
Zilvia Addict
Join Date: Jun 2011
Location: Maryville, TN
Age: 29
Posts: 830
Trader Rating: (3)
Feedback Score: 3 reviews
|
I only hooked up the ground and tapped the grey into the parking brake swtich but now my parking brake light doesnt work and cant get the timer to work...wtf?
__________________
|
01-13-2013, 09:58 PM | #8 |
Zilvia Addict
Join Date: Jun 2011
Location: Maryville, TN
Age: 29
Posts: 830
Trader Rating: (3)
Feedback Score: 3 reviews
|
alright found out my bulb was gone and fix it. but my turbo timer will NOT work, I turn key to the ACC it comes on, ebrake is up, but it wont let me change any of the settings i can only go up or down, or hold it to the left and it say "off"
I have the black wire grounded to ebreke, and the grey spliced with the ebrake switch. wtf am i doing wrong....
__________________
|
01-28-2013, 02:35 AM | #11 |
Zilvia Junkie
|
Are you sure the circuit sports harness isn't wired wrong? It should only turn on with the key in ON position and as long as it detects that ebrake is grounded, you should be able to change settings.
__________________
|
01-30-2013, 12:36 PM | #12 |
Zilvia Addict
Join Date: Jun 2011
Location: Maryville, TN
Age: 29
Posts: 830
Trader Rating: (3)
Feedback Score: 3 reviews
|
how would it be wired wrong? it comes on, everynow and then i will start the car and it will count down. And nope cant get to the settings, with ebrake up or down.
__________________
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|