Extrude honed intake manifold? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

e30gangsta · 10-27-2020, 11:21 AM

Has anyone on here ever sent off a stock sr intake manifold to get extrude honed? Seems like that would be the best option for those of us that want to keep the stock intake manifold to keep that low down tq. Im just wondering if anyone has done this and seen an increased benefit?

PoorMans180SX · 10-27-2020, 11:57 AM

I would love to have some back to back info on it. Typically increasing the diameter of the runners rocks the powerband like a see-saw with the pivot being at peak torque (usually determined by runner length).

I remember it used to be very expensive as well, I should e-mail them for a quote.

e30gangsta · 10-27-2020, 12:51 PM

Let me know what they say if you email them. I just think that's the best option for us street car guys who don't want to run a hypertune/greddy etc.

[email protected] · 10-29-2020, 12:07 AM

Where is this located? Is it in paramount ca?

e30gangsta · 10-29-2020, 06:12 AM

There's multiple companies that extrude hone. Some of them are in ca yes.

PoorMans180SX · 10-29-2020, 06:21 AM

Been doing some research... there seems to be very, very little information about the benefits of this... Along with some disappointing back to back dynos. Pretty concerning considering how long it's been around. "Best kept secret" or flop? Might be a better option to get the Xcessive weld-on plenum that keeps longer runners.

https://www.xcessivemanufacturing.co...et-s13-wi.html

Also, just FYI hypertune plenums have very little bottom end loss from what I've seen. Greddy's just kinda suck, at least for S13 SR, but that's not a popular opinion, hahaha.

RalliartRsX · 10-29-2020, 07:10 AM

Lot of $$$ for not alot of gain. By the time you invest in it, you could buy a properly tuned (runner length and volume) manifold.

Remember, turbo cars do not depend as much on manifold design as NA cars since they are just ramming air in. They more care about volume and having a reservoir to store that volume of air since it is now compressed and you can fit more "air" mass for a specific volume than if you were NA

TL.DR just buy a proper manifold and not waste your time. I don't think (not confirmed) the stock plenum volume is even 2 liters (the size of the engine and the minimal you want chamber volume to be)

PoorMans180SX · 10-29-2020, 07:24 AM

Quote:

Originally Posted by RalliartRsX

Lot of $$$ for not alot of gain. By the time you invest in it, you could buy a properly tuned (runner length and volume) manifold.

Remember, turbo cars do not depend as much on manifold design as NA cars since they are just ramming air in. They more care about volume and having a reservoir to store that volume of air since it is now compressed and you can fit more "air" mass for a specific volume than if you were NA

TL.DR just buy a proper manifold and not waste your time. I don't think (not confirmed) the stock plenum volume is even 2 liters (the size of the engine and the minimal you want chamber volume to be)

Ehhhhhh, gotta be careful with the statements like "do not depend as much". You can still really fuck up your powerband on a turbo car with the wrong intake manifold (Greddy/Freddy/Cheap Chinabay S13 IMHO). There is still pulse tuning and powerband effects from runner length, taper, entrance, and plenum volume.

RalliartRsX · 10-29-2020, 08:03 AM

Oh I absolutely agree! Was more watering down the discussion, as by the time you look into manifold tuning and building, you are spending way more than Extrude hone.......at which point, just plunk down a Hypertune or hit up CPC and have them (well, him) spec it out and manufacture it and remove all the guess work

There is OTS available software if one really wants to dabble in such and is probably above the level of this discussion lol!

*e1_griego* · 10-29-2020, 08:57 AM

The Mazworx intake manifold is purported to be all gain and no loss in the bottom/middle.

I'm installing one relatively soon and will hopefully have some comparison plots.

S14rebuild · 11-07-2020, 02:20 PM

This is why i went from a freddy style intake manifold to a hypertune/JUN intake manifold. Hopen to keep more lowend powerbqnd

e30gangsta · 11-07-2020, 05:45 PM

I wouldn't mind buying a mazwork, hypertune, or plazaman I take manifold. I just wish there was back to back dynos showing which one performed the best, so I could just buy that one lol

10-27-2020, 11:21 AM	#1
e30gangsta Zilvia Junkie Join Date: Oct 2013 Location: Savannah Age: 36 Posts: 562 Trader Rating: (4) Feedback Score: 4 reviews	Extrude honed intake manifold? Has anyone on here ever sent off a stock sr intake manifold to get extrude honed? Seems like that would be the best option for those of us that want to keep the stock intake manifold to keep that low down tq. Im just wondering if anyone has done this and seen an increased benefit? __________________ Need aftermarket parts? PM or DM me competitive pricing! [email protected]

10-27-2020, 11:57 AM	#2
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 33 Posts: 5,431 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	I would love to have some back to back info on it. Typically increasing the diameter of the runners rocks the powerband like a see-saw with the pivot being at peak torque (usually determined by runner length). I remember it used to be very expensive as well, I should e-mail them for a quote. __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

10-27-2020, 12:51 PM	#3
e30gangsta Zilvia Junkie Join Date: Oct 2013 Location: Savannah Age: 36 Posts: 562 Trader Rating: (4) Feedback Score: 4 reviews	Let me know what they say if you email them. I just think that's the best option for us street car guys who don't want to run a hypertune/greddy etc. __________________ Need aftermarket parts? PM or DM me competitive pricing! [email protected]

10-29-2020, 06:12 AM	#5
e30gangsta Zilvia Junkie Join Date: Oct 2013 Location: Savannah Age: 36 Posts: 562 Trader Rating: (4) Feedback Score: 4 reviews	There's multiple companies that extrude hone. Some of them are in ca yes. __________________ Need aftermarket parts? PM or DM me competitive pricing! [email protected]

10-29-2020, 06:21 AM	#6
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 33 Posts: 5,431 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	Been doing some research... there seems to be very, very little information about the benefits of this... Along with some disappointing back to back dynos. Pretty concerning considering how long it's been around. "Best kept secret" or flop? Might be a better option to get the Xcessive weld-on plenum that keeps longer runners. https://www.xcessivemanufacturing.co...et-s13-wi.html Also, just FYI hypertune plenums have very little bottom end loss from what I've seen. Greddy's just kinda suck, at least for S13 SR, but that's not a popular opinion, hahaha. __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

10-29-2020, 12:07 AM	#4
[email protected] Nissanaholic! Join Date: Jul 2008 Location: Zacatecas, Mx; Paramount, Ca Age: 31 Posts: 1,626 Trader Rating: (32) Feedback Score: 32 reviews	Where is this located? Is it in paramount ca?

10-29-2020, 07:10 AM	#7
RalliartRsX Post Whore! Join Date: Apr 2006 Location: Maryland Posts: 4,753 Trader Rating: (32) Feedback Score: 32 reviews	Lot of $$$ for not alot of gain. By the time you invest in it, you could buy a properly tuned (runner length and volume) manifold. Remember, turbo cars do not depend as much on manifold design as NA cars since they are just ramming air in. They more care about volume and having a reservoir to store that volume of air since it is now compressed and you can fit more "air" mass for a specific volume than if you were NA TL.DR just buy a proper manifold and not waste your time. I don't think (not confirmed) the stock plenum volume is even 2 liters (the size of the engine and the minimal you want chamber volume to be)

10-29-2020, 08:03 AM	#9
RalliartRsX Post Whore! Join Date: Apr 2006 Location: Maryland Posts: 4,753 Trader Rating: (32) Feedback Score: 32 reviews	Oh I absolutely agree! Was more watering down the discussion, as by the time you look into manifold tuning and building, you are spending way more than Extrude hone.......at which point, just plunk down a Hypertune or hit up CPC and have them (well, him) spec it out and manufacture it and remove all the guess work There is OTS available software if one really wants to dabble in such and is probably above the level of this discussion lol!

10-29-2020, 08:57 AM	#10
e1_griego Premium Member Join Date: Sep 2004 Location: Independence, Ore. Age: 36 Posts: 2,642 Trader Rating: (24) Feedback Score: 24 reviews	The Mazworx intake manifold is purported to be all gain and no loss in the bottom/middle. I'm installing one relatively soon and will hopefully have some comparison plots.

11-07-2020, 02:20 PM	#11
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,497 Trader Rating: (8) Feedback Score: 8 reviews	This is why i went from a freddy style intake manifold to a hypertune/JUN intake manifold. Hopen to keep more lowend powerbqnd

11-07-2020, 05:45 PM	#12
e30gangsta Zilvia Junkie Join Date: Oct 2013 Location: Savannah Age: 36 Posts: 562 Trader Rating: (4) Feedback Score: 4 reviews	I wouldn't mind buying a mazwork, hypertune, or plazaman I take manifold. I just wish there was back to back dynos showing which one performed the best, so I could just buy that one lol __________________ Need aftermarket parts? PM or DM me competitive pricing! [email protected]

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode