Sohc cut off 2500rmp - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*s13 @ fullboost* · 10-18-2008, 12:39 PM

So Last night I decided that my fan shroud should come off because my fan was cutting into it. After its off all said and done a took all the lines that used to sit on top of the fan shroud and zip tied them but not tight they can still move around I did it just enough so they wont get hit by that fan and they sit right under the intake. I reassemble everything fire the motor up and It idles for like a couple of seconds and dies so then I give it gas as soon as you get to twenty five it cuts out and will not let me go any higher. Please help need to get to work =/

timlush · 10-18-2008, 01:03 PM

Check the MAFS/wiring.

ChicagoS14 · 10-18-2008, 01:09 PM

Yeah what was stated above, usually if a car dies right away on start up and doesnt want to rev beyond 2500/3000 rpm thats the magic spot of the MAF giving trouble. If you need diagrams to help you diagnose what wires/possible vaccum lines you may need to look over then here it is:

.: Ultimate 240SX Guide :.

Ceepo · 10-18-2008, 01:15 PM

Maf, i had the same problem, or reset the ecu that helped me 2... disconnect the battery terminals over night should do that...

*s13 @ fullboost* · 10-18-2008, 01:38 PM

Thanks guys This shit is bugging me soo badly I know you guys know what I mean every s chassis owner knows what I mean haha

*s13 @ fullboost* · 10-18-2008, 03:13 PM

problem solved =]

10-18-2008, 12:39 PM	#1
s13 @ fullboost Spirit Of Ecstasy Join Date: Dec 2007 Location: Simi Valley, CA Posts: 2,531 Trader Rating: (15) Feedback Score: 15 reviews	Sohc cut off 2500rpm So Last night I decided that my fan shroud should come off because my fan was cutting into it. After its off all said and done a took all the lines that used to sit on top of the fan shroud and zip tied them but not tight they can still move around I did it just enough so they wont get hit by that fan and they sit right under the intake. I reassemble everything fire the motor up and It idles for like a couple of seconds and dies so then I give it gas as soon as you get to twenty five it cuts out and will not let me go any higher. Please help need to get to work =/ __________________ Last edited by s13 @ fullboost; 10-18-2008 at 02:11 PM..

10-18-2008, 01:09 PM	#3
ChicagoS14 Zilvia Addict Join Date: Aug 2004 Location: Chicago Age: 34 Posts: 695 Trader Rating: (6) Feedback Score: 6 reviews	Yeah what was stated above, usually if a car dies right away on start up and doesnt want to rev beyond 2500/3000 rpm thats the magic spot of the MAF giving trouble. If you need diagrams to help you diagnose what wires/possible vaccum lines you may need to look over then here it is: .: Ultimate 240SX Guide :. __________________ 95 240SX 1JZGTE \| SC300 2JZGE daily www.240sxguide.com

10-18-2008, 01:15 PM	#4
Ceepo Nissanaholic! Join Date: Jan 2008 Location: Cedar City, Utah Posts: 2,007 Trader Rating: (9) Rides Gallery: Ceepo Feedback Score: 9 reviews	Maf, i had the same problem, or reset the ecu that helped me 2... disconnect the battery terminals over night should do that... __________________ TW: http://zilvia.net/f/cars-sale/390459...d9s-coils.html

10-18-2008, 01:38 PM	#5
s13 @ fullboost Spirit Of Ecstasy Join Date: Dec 2007 Location: Simi Valley, CA Posts: 2,531 Trader Rating: (15) Feedback Score: 15 reviews	Thanks guys This shit is bugging me soo badly I know you guys know what I mean every s chassis owner knows what I mean haha __________________

10-18-2008, 03:13 PM	#6
s13 @ fullboost Spirit Of Ecstasy Join Date: Dec 2007 Location: Simi Valley, CA Posts: 2,531 Trader Rating: (15) Feedback Score: 15 reviews	problem solved =] __________________

10-18-2008, 01:03 PM	#2
timlush Zilvia FREAK! Join Date: Aug 2005 Location: Louisville, KY Age: 36 Posts: 1,169 Trader Rating: (12) Feedback Score: 12 reviews	Check the MAFS/wiring.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode