IL FS: Complete S15 SR/6-Spd, Full-Race 3076R, PowerFC, Tial, Blitz, Greddy, Toda, Earls - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Broadfield · 12-22-2010, 12:43 AM

As you may know, I am getting ready to swap in an LS3 over the winter. Considering nothing from this setup will be utilized for the V8 swap, I want to try and sell it as a complete drop-in swap... basically from the FMIC all the way back to the driveshaft and everything in between. This will be great for someone who is planning on an SR swap and is going to do a lot of top notch aftermarket to go along with it. It will save you a lot money in the long run. Drop it in and go, no tuning needed etc.

The fist dollar amount represents what I paid for everything. When I bought the stuff, I bought it for the cheapest I could find it at the time. All items were brand new at the time except for the motor and transmission of course. The dollar amount on the right represents a fair used price of what I would ask if I was parting it out. Keep in mind, all parts are in mint condition, as seen in pics. If I can't sell this thing as an entire package, then I will start to part it out. So these used prices will give you a really good idea of what I will be asking if that time comes.

With the purchase I will be including a brand new Wiring Specialties engine swap harness for your particular chassis. Mine is very specific to my vehicle and it will just be easier on everyone if I include a new one. I will most likely include the fuel pump(R33 GTR) and radiator fans(Spal) since I will probably need to run something different anyway. I didn't bother pricing in the little crap like the Turbo XS manual boost controller, new OEM water pump, oil pump etc. Nor the Gallery Fresh dress up bolts, as I feel those are for appearance purposes only and I don't expect to get anything for them. This setup also has full working A/C with the R134 compressor. It will include the custom lines to work in the S13 chassis.

So just to give you an idea, I have right at $19,000 into this list. Fair market used value comes out to $12,310. I am asking $11,000 as a package deal or OBO. Please post, PM or email me at: [email protected] if you have any questions.

Also, please feel free to post if you have interest in a part or want to call dibs. This will help give me an idea of how much interest I have if it comes down to parting it out. NOTE: I am going to give this about 2 months before I part it. At that time I will contact anyone who has showed interest and post the rest for sale in a new thread(s)

$3500/$2900 S15 engine SOLD 6-speed trans still available; no more than 65,000 miles
$1500/$1000 Apexi Power FC D-Jetro(w/MAP and intake sensors) Tuned for 400whp and 333wtq
$1400/$800 Blitz twin disc clutch/flywheel
$500/$300 Driveshaft Shop aluminum driveshaft SOLD
$950/$450 Greddy FMIC (no piping)
$375/$200 Greddy oil pan (Will not part out, goes with long block) SOLD
$690/$350 Greddy radiator SOLD
$340/$100 Greddy aluminum pulleys SOLD
$50/$20 Greddy 4” intake filter SOLD
$550/$350 Greddy intake manifold SOLD
$550/$400 70mm throttle body N15 SOLD
$120/$75 Tomei N15 throttle body adapter SOLD
$1350/$950 Garrett twin scroll GT3076R .78 A/R (Earls AN lines and fittings are not included, priced separately if you want them) SOLD
$1500/$1000 Full Race twin scroll manifold SOLD
$349/$200 Full Race downpipe SOLD
$220/$130 Blitz downpipe
$99/$40 Full Race dump tube SOLD
$349/$200 Tial 44mm wastegate (Earls AN lines and fittings are not included, priced separately if you want them) SOLD
$219/$130 Tial 50mm BOV (Earls AN lines and fittings are not included, priced separately if you want them) SOLD
$550/$300 PE 850cc injectors SOLD
$400/$250 Splitfire coil packs SOLD
$530/$300 Toda 264 cams (Will not part out, goes with long block) SOLD
$225/$100 Toda valve springs (Will not part out, goes with long block) SOLD
$110/$50 PE Kevlar belts SOLD
$148/$80 Brian Crower titanium retainers (Will not part out, goes with long block) SOLD
$69/$30 Tomei rocker arm stoppers (Will not part out, goes with long block) SOLD
$40/$29 Golden Eagle vacuum box (Earls AN lines and fittings are not included, priced separately if you want them)
$115/$60 Billet oil filter relocate (Earls AN lines and fittings are not included, priced separately if you want them) SOLD
$109/$60 Samco radiator hoses SOLD
$350/$200 Hose techniques couplers and t-bolt clamps SOLD
$30/$15 Custom 4” intake pipe (Does not include Hose Techniques couplers/t-bolts, priced separately if you want them) SOLD
$50/$20 Custom 2-1/4” hot side piping (Does not include Hose Techniques couplers/t-bolts, priced separately if you want them) SOLD
$75/$30 Custom 3” cold side piping (Does not include Hose Techniques couplers/t-bolts, priced separately if you want them) SOLD
$225/$150 T1 crankcase breather box (Earls AN lines and fittings are not included, priced separately if you want them) SOLD
$1100/$600 All custom Earls braided nylon lines w/Earls AN fittings: fuel, pressure, oil, coolant etc. SOLD
??? Gallery Fresh anodized bolts SOLD
$125/$60 Turbo XS High Performance manual boost controller (Earls AN lines and fittings are not included, priced separately if you want them)
$125/$80 Aeromotive fuel pressure regulator w/Earls inline fuel filter (Earls AN lines and fittings are not included, priced separately if you want them) SOLD
$100/$40 Custom short throw shifter w/titanium shift knob (Will not part out, goes with transmission)

The following pictures were taken by Nate Hassler of Modified Magazine:

xpertsnowcarver · 12-22-2010, 12:57 AM

Interested/Dibs on your driveshaft. Please confirm that it is for a 6 Speed to S13 open differential.

Sorry to hear about this part out. Always been a fan.

Edit: What exactly is custom about the short shifter?

I'm also interested in your Greddy Radiator.

NismoMax · 12-22-2010, 01:12 AM

Why couldnt you have put this up in may?!?!

reds13se · 12-22-2010, 03:21 AM

deff interested in the blitz bov....i would be honored to run it.....im curious to see the swap....shits gonna be sick like always!

TriniGT · 12-22-2010, 05:52 AM

Should be interested in injectors, coilpacks, Toda cams, springs and retainer and pulleys. Need to have them all shipped to Trinidad in the Caribbean. Postal code TT. I know prices are good but let me know what package price can be arranged. Would love to take the turbo setup but just don't have the cash now. This setup is awesome.

mxsx25 · 12-22-2010, 08:07 AM

Wow ... your engine bay leaves me speechless

sr20drifter1 · 12-22-2010, 08:27 AM

Dibs on custom oil catch can and Goldeneagle vaccum with earls fitting that go with them.I will also take the OEM cooler tank.

240knockout · 12-22-2010, 08:39 AM

Hey this is Ralph...I sent you an email. Looking to buy as soon as u decide to part.

ss1156ss · 12-22-2010, 08:44 AM

All I can say "Holy Crap..... that is absolutely awesome!!!

GLWS, if I hit 6 numbers tonight I will be giving you a call!!!

Couped_up'd · 12-22-2010, 08:53 AM

I got a new wall paper.

Irresistible · 12-22-2010, 10:14 AM

May I ask what you wrapped your P/s reservoir and half of your BMC in? The gold foil, what exactly is it? I assume it's to keep the fluids cool, but what's the name of the foil? Thanks in advance.

TOMEI GUY-S13 · 12-22-2010, 12:04 PM

wow Broadfield, I just saw the article in Modified mag with your car. I cant believe that your selling the setup. hope the LS works out for ya. Im hopeing that my build gets off the stand and in my car. lol I want you to build the same cluster that you have in the s13. its amazing. anyway good luck man.

felicianod83 · 12-22-2010, 02:45 PM

Oh man with the sell of the S15, Im hearing new Cluster being built by toby !!

s14canyoncity · 12-22-2010, 02:57 PM

wow very nice .... glws

RHDskyline · 12-22-2010, 03:22 PM

Whats all included in the oil filter relocation?

does it include the lines and such?

PM me thanks

burninskulls0911 · 12-23-2010, 11:33 AM

man, you have the nicest looking sr i have ever seen, props to you for the good work.

GLWS

nathanong87 · 12-23-2010, 12:48 PM

wish i was 5 lug

SammyGreen · 12-23-2010, 01:27 PM

Quote:

Originally Posted by Irresistible

May I ask what you wrapped your P/s reservoir and half of your BMC in? The gold foil, what exactly is it? I assume it's to keep the fluids cool, but what's the name of the foil? Thanks in advance.

You can order it through pretty much any auto parts store, its like a thermo wrap that sticks on. I used a lot of it in my STi when I had it works very well to keep heat away.

ANYWAYS... Id def be interesting in taking the Aeromotive Fuel Pressure Reg at time of part out if it happens.

Amazing car btw! Love it.

PerilousActs · 12-23-2010, 01:34 PM

Dibs on the rocker arm stoppers.

whiterps13 · 12-23-2010, 01:49 PM

Quote:

Originally Posted by nathanong87

wish i was 5 lug

Hahahah! Best post ever.

I will vouch for this setup. It is just as clean in person and is absolutely wicked fast.
Somebody buy it and be an instant G.

m2mike · 12-23-2010, 01:51 PM

someone buy this as a package! this motor is too sweet to be parted out!
if this was posted 3 months earlier, i would've bought it

i spent more money then what he's selling for and still can't come close to what he's done to his motor.

road bandit sx · 12-23-2010, 02:02 PM

Does anyone know the HP this set has to the wheels?

kamechikara · 12-23-2010, 02:05 PM

Pulling an install like that is fawkin we todd edd...parting it is fail of the year.

chiboy002 · 12-23-2010, 02:21 PM

Quote:

Originally Posted by Irresistible

May I ask what you wrapped your P/s reservoir and half of your BMC in? The gold foil, what exactly is it? I assume it's to keep the fluids cool, but what's the name of the foil? Thanks in advance.

Mishimoto "Heat Defense" Heat Protective Tape: <font color="#ccoooo">FREE SHIPPING</font>

It's like this, but probably another company?

kyles1988 · 12-23-2010, 02:41 PM

Quote:

Originally Posted by road bandit sx

Does anyone know the HP this set has to the wheels?

400whp
333wtq.

It's in the OP

Broadfield · 12-23-2010, 04:54 PM

Quote:

Originally Posted by kamechikara

Pulling an install like that is fawkin we todd edd...parting it is fail of the year.

It's not getting parted. I have every intention of selling it as a package. I will give it up to two months, then part if necessary.

Broadfield · 12-23-2010, 04:57 PM

Quote:

Originally Posted by reds13se

deff interested in the blitz bov....i would be honored to run it.....im curious to see the swap....shits gonna be sick like always!

I don't have a Blitz BOV???

Quote:

Originally Posted by Irresistible

May I ask what you wrapped your P/s reservoir and half of your BMC in? The gold foil, what exactly is it? I assume it's to keep the fluids cool, but what's the name of the foil? Thanks in advance.

Design Engineering DEI 010393 - DEI Reflect-A-GOLD Heat Barriers - Overview - SummitRacing.com

Quote:

Originally Posted by RHDskyline

Whats all included in the oil filter relocation?

does it include the lines and such?

PM me thanks

The price listed only includes the filter mount and the block adapter. The lines would be extra. I would figure a price for those if the time comes. Right now I just have the relocate lines listed under AN lines. If I part out I will make new threads to list things as small packages. IE: oil filter relocate with the lines. Or breather tank with lines. Etc. I simply listed things how I bought them. I had to make all of the lines custom, so I listed what I spent on the lines and fittings as a whole.

htownsr510 · 12-23-2010, 05:52 PM

Daym u I just bought greddy oil pan and pulleys and payed way more

Josho · 12-23-2010, 09:12 PM

I have never seen this car before!! Its sooo sick dude!

bb4_96 · 12-23-2010, 09:20 PM

blow off valve looks like a tial.

Which pulleys are included for $100? I can only see the water pump pulley. Is the wp pulley overdriven?

Thanks

12-22-2010, 12:43 AM	#1
Broadfield Zilvia.net Advertiser Join Date: Oct 2006 Location: Normal, IL Age: 47 Posts: 2,946 Trader Rating: (163) Feedback Score: 163 reviews	FS: Complete S15 SR/6-Spd, Full-Race 3076R, PowerFC, Tial, Blitz, Greddy, Toda, Earls As you may know, I am getting ready to swap in an LS3 over the winter. Considering nothing from this setup will be utilized for the V8 swap, I want to try and sell it as a complete drop-in swap... basically from the FMIC all the way back to the driveshaft and everything in between. This will be great for someone who is planning on an SR swap and is going to do a lot of top notch aftermarket to go along with it. It will save you a lot money in the long run. Drop it in and go, no tuning needed etc. The fist dollar amount represents what I paid for everything. When I bought the stuff, I bought it for the cheapest I could find it at the time. All items were brand new at the time except for the motor and transmission of course. The dollar amount on the right represents a fair used price of what I would ask if I was parting it out. Keep in mind, all parts are in mint condition, as seen in pics. If I can't sell this thing as an entire package, then I will start to part it out. So these used prices will give you a really good idea of what I will be asking if that time comes. With the purchase I will be including a brand new Wiring Specialties engine swap harness for your particular chassis. Mine is very specific to my vehicle and it will just be easier on everyone if I include a new one. I will most likely include the fuel pump(R33 GTR) and radiator fans(Spal) since I will probably need to run something different anyway. I didn't bother pricing in the little crap like the Turbo XS manual boost controller, new OEM water pump, oil pump etc. Nor the Gallery Fresh dress up bolts, as I feel those are for appearance purposes only and I don't expect to get anything for them. This setup also has full working A/C with the R134 compressor. It will include the custom lines to work in the S13 chassis. So just to give you an idea, I have right at $19,000 into this list. Fair market used value comes out to $12,310. I am asking $11,000 as a package deal or OBO. Please post, PM or email me at: [email protected] if you have any questions. Also, please feel free to post if you have interest in a part or want to call dibs. This will help give me an idea of how much interest I have if it comes down to parting it out. NOTE: I am going to give this about 2 months before I part it. At that time I will contact anyone who has showed interest and post the rest for sale in a new thread(s) $3500/$2900 S15 engine SOLD 6-speed trans still available; no more than 65,000 miles $1500/$1000 Apexi Power FC D-Jetro(w/MAP and intake sensors) Tuned for 400whp and 333wtq $1400/$800 Blitz twin disc clutch/flywheel $500/$300 Driveshaft Shop aluminum driveshaft SOLD $950/$450 Greddy FMIC (no piping) $375/$200 Greddy oil pan (Will not part out, goes with long block) SOLD $690/$350 Greddy radiator SOLD $340/$100 Greddy aluminum pulleys SOLD $50/$20 Greddy 4” intake filter SOLD $550/$350 Greddy intake manifold SOLD $550/$400 70mm throttle body N15 SOLD $120/$75 Tomei N15 throttle body adapter SOLD $1350/$950 Garrett twin scroll GT3076R .78 A/R (Earls AN lines and fittings are not included, priced separately if you want them) SOLD $1500/$1000 Full Race twin scroll manifold SOLD $349/$200 Full Race downpipe SOLD $220/$130 Blitz downpipe $99/$40 Full Race dump tube SOLD $349/$200 Tial 44mm wastegate (Earls AN lines and fittings are not included, priced separately if you want them) SOLD $219/$130 Tial 50mm BOV (Earls AN lines and fittings are not included, priced separately if you want them) SOLD $550/$300 PE 850cc injectors SOLD $400/$250 Splitfire coil packs SOLD $530/$300 Toda 264 cams (Will not part out, goes with long block) SOLD $225/$100 Toda valve springs (Will not part out, goes with long block) SOLD $110/$50 PE Kevlar belts SOLD $148/$80 Brian Crower titanium retainers (Will not part out, goes with long block) SOLD $69/$30 Tomei rocker arm stoppers (Will not part out, goes with long block) SOLD $40/$29 Golden Eagle vacuum box (Earls AN lines and fittings are not included, priced separately if you want them) $115/$60 Billet oil filter relocate (Earls AN lines and fittings are not included, priced separately if you want them) SOLD $109/$60 Samco radiator hoses SOLD $350/$200 Hose techniques couplers and t-bolt clamps SOLD $30/$15 Custom 4” intake pipe (Does not include Hose Techniques couplers/t-bolts, priced separately if you want them) SOLD $50/$20 Custom 2-1/4” hot side piping (Does not include Hose Techniques couplers/t-bolts, priced separately if you want them) SOLD $75/$30 Custom 3” cold side piping (Does not include Hose Techniques couplers/t-bolts, priced separately if you want them) SOLD $225/$150 T1 crankcase breather box (Earls AN lines and fittings are not included, priced separately if you want them) SOLD $1100/$600 All custom Earls braided nylon lines w/Earls AN fittings: fuel, pressure, oil, coolant etc. SOLD ??? Gallery Fresh anodized bolts SOLD $125/$60 Turbo XS High Performance manual boost controller (Earls AN lines and fittings are not included, priced separately if you want them) $125/$80 Aeromotive fuel pressure regulator w/Earls inline fuel filter (Earls AN lines and fittings are not included, priced separately if you want them) SOLD $100/$40 Custom short throw shifter w/titanium shift knob (Will not part out, goes with transmission) The following pictures were taken by Nate Hassler of Modified Magazine: __________________ Follow Along For My Latest Work My Portfolio Please Share Check Out My Builds Last edited by Broadfield; 03-09-2011 at 10:25 PM..

12-22-2010, 12:57 AM	#2
xpertsnowcarver Post Whore! Join Date: Jan 2007 Location: LA, CA Posts: 2,667 Trader Rating: (44) Feedback Score: 44 reviews	Interested/Dibs on your driveshaft. Please confirm that it is for a 6 Speed to S13 open differential. Sorry to hear about this part out. Always been a fan. Edit: What exactly is custom about the short shifter? I'm also interested in your Greddy Radiator. __________________ My YouTube Channel Last edited by xpertsnowcarver; 12-24-2010 at 06:52 PM..

12-22-2010, 01:12 AM	#3
NismoMax Join Date: Jun 2007 Location: New Jersey (not by choice) Age: 37 Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	Why couldnt you have put this up in may?!?! __________________ Kouki = win Zenki

12-22-2010, 08:07 AM	#6
mxsx25 Zilvia Junkie Join Date: Sep 2007 Location: hudson NH Age: 33 Posts: 415 Trader Rating: (0) Feedback Score: 0 reviews	Wow ... your engine bay leaves me speechless __________________

12-22-2010, 08:27 AM	#7
sr20drifter1 Zilvia FREAK! Join Date: Feb 2006 Location: Katanga Posts: 1,008 Trader Rating: (66) Feedback Score: 66 reviews	Oil catch can Dibs on custom oil catch can and Goldeneagle vaccum with earls fitting that go with them.I will also take the OEM cooler tank. __________________ DAOUD AKA KONGO DAVE

12-22-2010, 03:21 AM	#4
reds13se Leaky Injector Join Date: Sep 2009 Location: Fayetteville, NC Age: 29 Posts: 87 Trader Rating: (0) Feedback Score: 0 reviews	deff interested in the blitz bov....i would be honored to run it.....im curious to see the swap....shits gonna be sick like always!

12-22-2010, 05:52 AM	#5
TriniGT Zilvia Addict Join Date: Jun 2005 Location: Trinidad Posts: 981 Trader Rating: (11) Feedback Score: 11 reviews	Should be interested in injectors, coilpacks, Toda cams, springs and retainer and pulleys. Need to have them all shipped to Trinidad in the Caribbean. Postal code TT. I know prices are good but let me know what package price can be arranged. Would love to take the turbo setup but just don't have the cash now. This setup is awesome.

12-22-2010, 08:39 AM	#8
240knockout Zilvia Addict Join Date: Oct 2008 Location: Fort Lauderdale, Fl Age: 33 Posts: 602 Trader Rating: (9) Feedback Score: 9 reviews	Hey this is Ralph...I sent you an email. Looking to buy as soon as u decide to part.

12-22-2010, 08:44 AM	#9
ss1156ss Zilvia Member Join Date: Sep 2010 Location: Clearwater, FL Posts: 297 Trader Rating: (2) Feedback Score: 2 reviews	All I can say "Holy Crap..... that is absolutely awesome!!! GLWS, if I hit 6 numbers tonight I will be giving you a call!!!

12-22-2010, 08:53 AM	#10
Couped_up'd Zilvia FREAK! Join Date: Feb 2009 Location: Candy Mountain Posts: 1,119 Trader Rating: (47) Feedback Score: 47 reviews	I got a new wall paper.

12-22-2010, 10:14 AM	#11
Irresistible Nissanaholic! Join Date: Dec 2009 Location: Chicago, IL Posts: 1,994 Trader Rating: (21) Feedback Score: 21 reviews	May I ask what you wrapped your P/s reservoir and half of your BMC in? The gold foil, what exactly is it? I assume it's to keep the fluids cool, but what's the name of the foil? Thanks in advance. __________________ GLEAM//★☆Street Dancer☆★ IG: streetdncr // tumblr: steve-strtdncr

12-22-2010, 12:04 PM	#12
TOMEI GUY-S13 Banned from the Marketplace Join Date: Nov 2010 Location: Tulsa, Ok Age: 31 Posts: 96 Trader Rating: (1) Feedback Score: 1 reviews	wow Broadfield, I just saw the article in Modified mag with your car. I cant believe that your selling the setup. hope the LS works out for ya. Im hopeing that my build gets off the stand and in my car. lol I want you to build the same cluster that you have in the s13. its amazing. anyway good luck man.

12-22-2010, 02:45 PM	#13
felicianod83 Join Date: Aug 2009 Location: New Jesery Age: 37 Posts: 46 Trader Rating: (1) Feedback Score: 1 reviews	Oh man with the sell of the S15, Im hearing new Cluster being built by toby !!

12-22-2010, 02:57 PM	#14
s14canyoncity Zilvia FREAK! Join Date: Jun 2009 Location: Socal Posts: 1,181 Trader Rating: (50) Feedback Score: 50 reviews	wow very nice .... glws __________________ Nissan S14 Navan Zenki

12-22-2010, 03:22 PM	#15
RHDskyline Zilvia Member Join Date: Jan 2010 Location: Alberta Canada Posts: 175 Trader Rating: (2) Feedback Score: 2 reviews	Whats all included in the oil filter relocation? does it include the lines and such? PM me thanks

12-23-2010, 11:33 AM	#16
burninskulls0911 Zilvia Addict Join Date: May 2008 Location: Jupiter FL Age: 31 Posts: 827 Trader Rating: (7) Feedback Score: 7 reviews	man, you have the nicest looking sr i have ever seen, props to you for the good work. GLWS

12-23-2010, 12:48 PM	#17
nathanong87 Post Whore! Join Date: Jul 2006 Location: maryland Age: 33 Posts: 5,182 Trader Rating: (6) Feedback Score: 6 reviews	wish i was 5 lug __________________ IG @nathanong87 --- Night ★ Life natelife.tumblr.com

12-23-2010, 01:34 PM	#19
PerilousActs Zilvia Junkie Join Date: Feb 2009 Location: Walton, Kentucky Age: 30 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	Dibs on the rocker arm stoppers.

12-23-2010, 01:51 PM	#21
m2mike Zilvia Member Join Date: Oct 2007 Location: Rowland Heights Posts: 190 Trader Rating: (4) Feedback Score: 4 reviews	someone buy this as a package! this motor is too sweet to be parted out! if this was posted 3 months earlier, i would've bought it i spent more money then what he's selling for and still can't come close to what he's done to his motor. __________________ m2mikee.wordpress.com

12-23-2010, 02:02 PM	#22
road bandit sx Join Date: Dec 2009 Location: Brampton Age: 60 Posts: 15 Trader Rating: (0) Feedback Score: 0 reviews	Does anyone know the HP this set has to the wheels?

12-23-2010, 02:05 PM	#23
kamechikara Zilvia Junkie Join Date: Oct 2007 Location: SOCAL Posts: 350 Trader Rating: (2) Feedback Score: 2 reviews	Pulling an install like that is fawkin we todd edd...parting it is fail of the year.

12-23-2010, 05:52 PM	#28
htownsr510 Zilvia Member Join Date: Jan 2010 Location: se houston Age: 39 Posts: 156 Trader Rating: (3) Feedback Score: 3 reviews	Daym u I just bought greddy oil pan and pulleys and payed way more

12-23-2010, 09:12 PM	#29
Josho Zilvia Junkie Join Date: Mar 2010 Location: AL Posts: 310 Trader Rating: (7) Feedback Score: 7 reviews	I have never seen this car before!! Its sooo sick dude!

12-23-2010, 09:20 PM	#30
bb4_96 Zilvia Addict Join Date: Jan 2006 Location: Under my car Posts: 785 Trader Rating: (4) Feedback Score: 4 reviews	blow off valve looks like a tial. Which pulleys are included for $100? I can only see the water pump pulley. Is the wp pulley overdriven? Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode