Turbochargers for Zilvia!!! - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

fearlessKouki · 10-12-2012, 10:39 AM

Do you offer steel wheel upgrade (exhaust side) for rb20det turbo?

JFoxx · 10-12-2012, 12:08 PM

Quote:

Originally Posted by turbo2nr

how much for

divided t3 1.06 turbine housing.
using it on a atp3582r

lmk thanks

does the 1.06 even come in a t3? i thought all of those sizes were t4......

[email protected] · 10-12-2012, 12:46 PM

Quote:

Originally Posted by turbo2nr

how much for

divided t3 1.06 turbine housing.
using it on a atp3582r

lmk thanks

New - $375 + Shipping. Thanks

BiG MiKE86 · 10-12-2012, 01:03 PM

Have anything comparable to the Precision 6266 .68a/r T4 V-band? LMK

TrustS13 · 10-12-2012, 01:35 PM

Quote:

Originally Posted by [email protected]

No, to support 400whp you would have to upgrade your compressor wheel and turbine wheel (if you have a GT2560r). Your GT2560r turbine wheel is simply too small for 400whp. Now if you have a GT2860r, different turbine wheel, different story.

Turn around time depends on what we are doing for you. Rebuilds can be 1-4 days. Complete upgrades requiring machining can take up to 1-2 weeks. Depends on our work load too. We have 4 techs building turbos 40 hrs a week. So we are busy. Customer pays for shipping. Return shipping is a fixed $25 in the continental states.
Thanks

So what kind of power and spoolup gains would I notice from just upgrading my wheel to the billet wheel? And with the $650.00 GTX upgrade? I think the wheel upgrade might be more in my budget now, just curious on gains of this, versus yalls 490 hp turbo if I should just snag it. Feel free to PM me if needed. My goals are mid 300s right now. Thanks!

nissanfreak317 · 10-12-2012, 01:54 PM

What are my options if I wanted to upgrade my GT2871R .64 A/R?

[email protected] · 10-12-2012, 02:00 PM

Quote:

Originally Posted by fearlessKouki

Do you offer steel wheel upgrade (exhaust side) for rb20det turbo?

No, but we do machine the turbine housings to fit our Custom Billet 55 or 57 JB Turbos. Price is $695

Quote:

Originally Posted by BiG MiKE86

Have anything comparable to the Precision 6266 .68a/r T4 V-band? LMK

Yes, we have a lot comparable. What engine? What is your whp goal? BB or JB?

Thanks!

[email protected] · 10-12-2012, 02:26 PM

Quote:

Originally Posted by TrustS13

So what kind of power and spoolup gains would I notice from just upgrading my wheel to the billet wheel? And with the $650.00 GTX upgrade? I think the wheel upgrade might be more in my budget now, just curious on gains of this, versus yalls 490 hp turbo if I should just snag it. Feel free to PM me if needed. My goals are mid 300s right now. Thanks!

The drop-in billet wheel upgrade is not a substantial upgrade. The gt2560r is always limited by the turbine wheel size. However, for $350 installed, the upgrade is well worth it. The gt2560r has been known as one of the best fast spool options for these motors, and to get it to spool even faster is sweet!!!

For reference:

Stock GT2560R Cast Compressor Wheel Weighs: 53 grams

PureTurbos Billet GT2560R Drop-In Compressor Wheel Weighs: 41 grams

That's 22.6% LIGHTER!!!

Didn't mention previously: These have a minor 7 degree extended tip too!

Quote:

Originally Posted by nissanfreak317

What are my options if I wanted to upgrade my GT2871R .64 A/R?

Upgrade to Billet 71R wheel:
$295 Wheel
$100 Machining
$100 Install and balance
$495 total

Upgrade to GT3071R (non-billet)
$650 total

Upgrade to GTX3071R Billet
$900 total

Let me know if you have anymore questions.
Thanks

nissanfreak317 · 10-12-2012, 02:29 PM

Quote:

Originally Posted by [email protected]

Upgrade to Billet 71R wheel:
$295 Wheel
$100 Machining
$100 Install and balance
$495 total

Upgrade to GT3071R (non-billet)
$650 total

Upgrade to GTX2871R Billet
$900 total

Let me know if you have anymore questions.
Thanks

What kind of performance gains would there be for upgrading to a Billet 71R wheel?

BiG MiKE86 · 10-12-2012, 02:38 PM

Quote:

Originally Posted by [email protected]

Yes, we have a lot comparable. What engine? What is your whp goal? BB or JB?

Thanks!

Journal Bearing - 2JZ - 450-550rwhp with some room for growth later

[email protected] · 10-12-2012, 02:40 PM

Quote:

Originally Posted by nissanfreak317

What kind of performance gains would there be for upgrading to a Billet 71R wheel?

Sorry, my bad. I meant to say upgrade to GTX3071R for $900
(because you're already starting with a GT2871R)
I edited last post for correction

For CW only billet 71r upgrade, supports over 475 crank hp and spools faster than normal 56 trim GT2871R

Thanks

[email protected] · 10-12-2012, 03:46 PM

Quote:

Originally Posted by BiG MiKE86

Journal Bearing - 2JZ - 450-550rwhp with some room for growth later

AH! We love 2JZ's !

I recommend one of two turbos:

6265PTX (supports up to 770 crank hp)

6765PTX (supports up to 850 crank hp)

Both of these are very fast spooling on a 2JZ.

Retail: $895, PM me for your "special" price

Thanks

richmond82 · 10-12-2012, 03:51 PM

we spoke of a 5557 being the best fit for me yesterday. After payment is received how long until the turbo is built and sent out to me ?

[email protected] · 10-12-2012, 04:01 PM

Quote:

Originally Posted by richmond82

we spoke of a 5557 being the best fit for me yesterday. After payment is received how long until the turbo is built and sent out to me ?

Ya, you talked to Chuck about the Billet 5557. All parts in stock for that turbo. We can ship it same day if you order in the morning. It will go out the next business day if ordered in the afternoon.
Thanks

s13_kcut · 10-12-2012, 09:31 PM

What upgrade can be done to a stock s13 t25?

hellion240sx · 10-12-2012, 10:32 PM

what can you do with this?

IHI RHF5:
Comp. Wheel – 38.5 / 52.15mm
Turbine Wheel – 46.35 / 52.7 mm
Bearing system – Journal Bearing
Cooling System – Water & Oil

1gr8bar10der · 10-13-2012, 06:11 AM

This thread is so much win!

richmond82 · 10-13-2012, 08:52 AM

you guys hit the need spot on. lots of sr guys looking for cost effective (quality) ball bearing billet wheel turbos or upgrades. you guys should be shit ton busy soon !

nism014 · 10-14-2012, 04:02 AM

fuk, I'ma get in trouble with the wife for throwing money your way.

nism014 · 10-14-2012, 04:03 AM

on a serious note. How much would shipping to Hawaii cost me!?

I have a s14 T28 and will probably go with your $350 special for it.

[email protected] · 10-14-2012, 05:48 PM

Quote:

Originally Posted by s13_kcut

What upgrade can be done to a stock s13 t25?

Stock JB S13 T25 options:
Cast CW 60 Trim upgrade, supports 310 crank hp - $250
Billet 60trim CW upgrade, supports 325 hp (not recommended, limited by turbine wheel size) - $450
Cast CW and Turbine upgrade, GT2860 JB specs, supports 360+ hp - $650
Billet 60trim CW and Turbine upgrade, JB, supports 375+ hp - $900

Prices can vary depending on the condition of the turbo sent to us for CW only upgrades. The $650 and $900 options include a new CHRA so condition doesn't matter.

Quote:

Originally Posted by hellion240sx

what can you do with this?

IHI RHF5:
Comp. Wheel – 38.5 / 52.15mm
Turbine Wheel – 46.35 / 52.7 mm
Bearing system – Journal Bearing
Cooling System – Water & Oil

We have 6 different RHF5 Billet Compressor Wheels available.

Inducers ranging from 43mm to 49mm
Exducers ranging from 60mm to 65mm

I recommend the 6 blade 46.5mm inducer, 60mm exducer.
Very light weight for fast spool and supports over 350 crank hp. Your turbine wheel would be the limiting factor.

Billet CW Price - $250
Machine Comp Housing - $100
Install and balance - $100
Total - $450 (assuming your turbo doesn't need a rebuild)

We also have these wheels in standard cast non-billet. Total price installed - $300

Quote:

Originally Posted by nism014

on a serious note. How much would shipping to Hawaii cost me!?

I have a s14 T28 and will probably go with your $350 special for it.

Shipping should be about $35.

Thanks guys!!!

[email protected] · 10-14-2012, 05:49 PM

Quote:

Originally Posted by 1gr8bar10der

This thread is so much win!

Your avatar is so much win!

[email protected] · 10-14-2012, 08:28 PM

Quote:

Originally Posted by hellion240sx

what can you do with this?

IHI RHF5:
Comp. Wheel – 38.5 / 52.15mm
Turbine Wheel – 46.35 / 52.7 mm
Bearing system – Journal Bearing
Cooling System – Water & Oil

Sorry, the last response was assuming you meant a RHF55 or RHF5H which has a 6.1mm shaft for the compressor wheel. We also have 24 different Billet wheels which fit RHF5 with the 5.1mm shaft. Please measure the shaft or give me the part number of the turbo or vehicle application so we can identify which wheels are proper for your turbo.

Thanks

JDM_Tuner · 10-14-2012, 08:44 PM

I can't wait to order my billet wheel upgrade! Everyone hit these guys up, its time to upgrade!

hellion240sx · 10-15-2012, 08:14 AM

Quote:

Originally Posted by [email protected]

Sorry, the last response was assuming you meant a RHF55 or RHF5H which has a 6.1mm shaft for the compressor wheel. We also have 24 different Billet wheels which fit RHF5 with the 5.1mm shaft. Please measure the shaft or give me the part number of the turbo or vehicle application so we can identify which wheels are proper for your turbo.

Thanks

2005 mazdaspeed miata

[email protected] · 10-15-2012, 11:39 AM

Quote:

Originally Posted by hellion240sx

2005 mazdaspeed miata

OK, so you have the 5.1mm shaft size.

We have the drop-in billet wheel for $250. $100 install and balance on a good working turbo (no rebuild included). $350 total.

Or you can go to a bigger upgrade wheel, just add $100 for machining compressor housing.

Thanks

didderson · 10-16-2012, 02:52 PM

They are gorgeous. My gt2871R is fresh, but when it's dead I'll remember your name!
5 axis mill...

Impeller machining on five axis Starrag machiningcenter - YouTube

hellion240sx · 10-16-2012, 07:25 PM

guys i talked to chuck, i believe, And was super helpful. HE told me a lot of info i didn't know. told me what would be best, and not tried to over sell. that's key. i need to call him back have another question to ask him. Easy to talk to. i look forward to doing business with pure turbos

[email protected] · 10-17-2012, 10:21 AM

Quote:

Originally Posted by hellion240sx

guys i talked to chuck, i believe, And was super helpful. HE told me a lot of info i didn't know. told me what would be best, and not tried to over sell. that's key. i need to call him back have another question to ask him. Easy to talk to. i look forward to doing business with pure turbos

Thanks for the positive feedback! Chuck is just as qualified as I am to take care of our valued Zilvia members!

BiG MiKE86 · 10-17-2012, 10:44 AM

Waiting on a price for turbo we discussed over pm's - thanks

10-12-2012, 01:03 PM	#34
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 35 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	Have anything comparable to the Precision 6266 .68a/r T4 V-band? LMK __________________

10-12-2012, 01:54 PM	#36
nissanfreak317 Zilvia Junkie Join Date: Apr 2008 Location: Souderton, PA Age: 35 Posts: 597 Trader Rating: (18) Feedback Score: 18 reviews	What are my options if I wanted to upgrade my GT2871R .64 A/R? __________________ WTB: S13 Silvia front pieces Need: Hood, Fenders, Bumper, Headlights + brackets. Have decent pop-up front to trade with oem hood + vis racing carbon fiber hood if interested.

10-12-2012, 03:51 PM	#43
richmond82 Zilvia Addict Join Date: Apr 2010 Location: oregon Posts: 748 Trader Rating: (29) Feedback Score: 29 reviews	we spoke of a 5557 being the best fit for me yesterday. After payment is received how long until the turbo is built and sent out to me ? __________________ Drake: 95 Swapped S15SR Z32 Swapped TT 1991Vert

10-12-2012, 10:32 PM	#46
hellion240sx Zilvia FREAK! Join Date: Nov 2003 Location: NOLA Age: 40 Posts: 1,509 Trader Rating: (0) Feedback Score: 0 reviews	what can you do with this? IHI RHF5: Comp. Wheel – 38.5 / 52.15mm Turbine Wheel – 46.35 / 52.7 mm Bearing system – Journal Bearing Cooling System – Water & Oil __________________ R.I.P. KAIN. YOU'LL ALWAYS BE BY MY SIDE! 240 addict miata addict

10-13-2012, 08:52 AM	#48
richmond82 Zilvia Addict Join Date: Apr 2010 Location: oregon Posts: 748 Trader Rating: (29) Feedback Score: 29 reviews	you guys hit the need spot on. lots of sr guys looking for cost effective (quality) ball bearing billet wheel turbos or upgrades. you guys should be shit ton busy soon ! __________________ Drake: 95 Swapped S15SR Z32 Swapped TT 1991Vert

10-12-2012, 10:39 AM	#31
fearlessKouki Zilvia Member Join Date: Oct 2010 Location: Ohio Age: 30 Posts: 278 Trader Rating: (2) Feedback Score: 2 reviews	Do you offer steel wheel upgrade (exhaust side) for rb20det turbo?

10-12-2012, 09:31 PM	#45
s13_kcut Join Date: Jul 2010 Location: Oregon Age: 37 Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	What upgrade can be done to a stock s13 t25?

10-13-2012, 06:11 AM	#47
1gr8bar10der Post Whore! Join Date: Aug 2009 Location: Tampa/Bangkok Posts: 3,431 Trader Rating: (77) Feedback Score: 77 reviews	This thread is so much win!

10-14-2012, 04:02 AM	#49
nism014 Zilvia Junkie Join Date: Mar 2007 Location: HI Posts: 405 Trader Rating: (14) Feedback Score: 14 reviews	fuk, I'ma get in trouble with the wife for throwing money your way.

10-14-2012, 04:03 AM	#50
nism014 Zilvia Junkie Join Date: Mar 2007 Location: HI Posts: 405 Trader Rating: (14) Feedback Score: 14 reviews	on a serious note. How much would shipping to Hawaii cost me!? I have a s14 T28 and will probably go with your $350 special for it.

10-14-2012, 08:44 PM	#54
JDM_Tuner Zilvia FREAK! Join Date: Jul 2009 Location: Kansas City, KS Posts: 1,024 Trader Rating: (35) Rides Gallery: JDM_Tuner Feedback Score: 35 reviews	I can't wait to order my billet wheel upgrade! Everyone hit these guys up, its time to upgrade!

10-16-2012, 02:52 PM	#57
didderson Zilvia Member Join Date: Apr 2006 Location: Phila/Lancaster, PA Age: 36 Posts: 291 Trader Rating: (6) Feedback Score: 6 reviews	They are gorgeous. My gt2871R is fresh, but when it's dead I'll remember your name! 5 axis mill... Impeller machining on five axis Starrag machiningcenter - YouTube __________________

10-16-2012, 07:25 PM	#58
hellion240sx Zilvia FREAK! Join Date: Nov 2003 Location: NOLA Age: 40 Posts: 1,509 Trader Rating: (0) Feedback Score: 0 reviews	guys i talked to chuck, i believe, And was super helpful. HE told me a lot of info i didn't know. told me what would be best, and not tried to over sell. that's key. i need to call him back have another question to ask him. Easy to talk to. i look forward to doing business with pure turbos __________________ R.I.P. KAIN. YOU'LL ALWAYS BE BY MY SIDE! 240 addict miata addict

10-17-2012, 10:44 AM	#60
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 35 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	Waiting on a price for turbo we discussed over pm's - thanks __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode