|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
|
Thread Tools | Display Modes |
07-14-2008, 10:08 PM | #1 |
Zilvia Junkie
|
Bogging/Hesitation out of boost
Trying to diagnose this issue as its just kind of annoying right now. Heres all mods basically that could be relevant...
- Nismo 555cc injectors -300zx mafs -Jim wolf retuned ECU - chipped for injectors/maf -Greddy Intake, FMIC, BOV (vented) -3" TBE -HKS Step 2 Cams 264/272 -300zx Throttle Body -Turbo XS Manual Boost Controller Essentially what happens when I drive around in the 2000-2500 RPM range before I hit boost, on partial throttle, is some bogging/hesitation. The car will just feel like it is hesitating and won't feel linear. It will buck a tad too. If I let off the gas and get back on it, it is cleared up usually or if I get on the gas hard and hit a few psi of boost it clears it up significantly. Sometimes it never happens, sometimes it happens every gear but as soon as I get past 2500 the hesitation never exists. Car was run at 10-15 psi and it exists at any boost level. My first guess was that this would be the vented BOV richening the car out and making it bog... am I right in that assumption? I know throwing a wideband on the car would basically tell me if I was right or wrong, but I don't have one of those nor the money for it. Should I get someone to recirc the BOV for me and see if that solves the issue or could it just be a shitty tune? Don't know how good the jim wolf tunes are as I bought the car with it. |
Sponsored Links |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|