Pbm rear lower control arm s14 help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

KC224 · 02-13-2016, 05:17 PM

So I got my Pbm rlca with camber, toe, traction and the drop knuckle. the rlca looks to long even when all the way threaded in. Heim joint is maxed itself out towards subframe. Even under compression I have all arms as short as possible and it looks like I'm at positive camber a tiny bit or zero which is fine I want it zerod but there's no room for any camber adjustment if I wanted any negative. I think because the heim is maxed already.

Solvedd

*!Zar!* · 02-24-2016, 11:25 PM

To go negative on a lower control arm that rod needs to come out.

Thus making the lower arm longer.

That would give you more negative camber.

I don't get what the problem is.

Also, do you have adjustable rear upper control arms?

KC224 · 02-25-2016, 09:34 AM

Yes it has all the Pbm arms in the rear and the problem was the heim joint was maxed out against itself. But I fixed it everything's good now.

02-13-2016, 05:17 PM	#1
KC224 Zilvia Member Join Date: Jul 2011 Location: SCV/sixflags Posts: 165 Trader Rating: (23) Feedback Score: 23 reviews	Pbm rear lower control arm s14 help So I got my Pbm rlca with camber, toe, traction and the drop knuckle. the rlca looks to long even when all the way threaded in. Heim joint is maxed itself out towards subframe. Even under compression I have all arms as short as possible and it looks like I'm at positive camber a tiny bit or zero which is fine I want it zerod but there's no room for any camber adjustment if I wanted any negative. I think because the heim is maxed already. Solvedd Last edited by KC224; 10-21-2016 at 11:53 PM..

02-24-2016, 11:25 PM	#2
!Zar! Premium Member Join Date: Nov 2004 Location: North Korea Posts: 14,576 Trader Rating: (27) Feedback Score: 27 reviews	To go negative on a lower control arm that rod needs to come out. Thus making the lower arm longer. That would give you more negative camber. I don't get what the problem is. Also, do you have adjustable rear upper control arms? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-25-2016, 09:34 AM	#3
KC224 Zilvia Member Join Date: Jul 2011 Location: SCV/sixflags Posts: 165 Trader Rating: (23) Feedback Score: 23 reviews	Yes it has all the Pbm arms in the rear and the problem was the heim joint was maxed out against itself. But I fixed it everything's good now.