sr20det swap lower harness question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*wangan_cruiser* · 07-10-2009, 02:11 AM

Ive done my research and never found the answer for my question.

as far i read that when u do a swap from s13 to s13 u can use sr lower harness without splicing it will work.

on ka harness has like 4 plugs around the fuse box.

3 on the side and 1 on undearneath.

then i plugged my sr harness it plugs in with those 3 connectors on the side but it is missing the plug from underneath the fuse box.

im already wonderin that plug needs to be connected somwhere but i dont know what should i do with it.

some says u need to splice the transmission clips from sr to ka with their corresponding color match. but im not sure so any help would be appreciated. im currently stuck with this.

thanks

brian3676 · 07-10-2009, 01:14 PM

just use your stock KA one, Take all the sensors out of the KA tranny and take swap then out with the SR tranny sensors then use KA, everything plugs right in

*wangan_cruiser* · 07-10-2009, 01:34 PM

which one to splice?

can u tell me

johngriff · 07-10-2009, 02:03 PM

LENGTH will help you to determine where to splice them in.

Its just the 4th 5th and reverse lights. You can wire them backwards and it will be fine.

At the end of the day all you need is the reverse sensor anyways, so just do that one.

projectRDM · 07-10-2009, 03:19 PM

All you need is VSS and reverse. And if you don't care about reverse lights you don't even need it.

We've talked about this what, for over a decade?

fast-datsun · 07-10-2009, 06:38 PM

Just use the KA harness and switch the SR sensors for the KA sensors you your done

07-10-2009, 02:11 AM	#1
wangan_cruiser kouki man Join Date: Apr 2006 Location: downtown oakland,ca Age: 36 Posts: 3,535 Trader Rating: (36) Feedback Score: 36 reviews	sr20det swap lower harness question Ive done my research and never found the answer for my question. as far i read that when u do a swap from s13 to s13 u can use sr lower harness without splicing it will work. on ka harness has like 4 plugs around the fuse box. 3 on the side and 1 on undearneath. then i plugged my sr harness it plugs in with those 3 connectors on the side but it is missing the plug from underneath the fuse box. im already wonderin that plug needs to be connected somwhere but i dont know what should i do with it. some says u need to splice the transmission clips from sr to ka with their corresponding color match. but im not sure so any help would be appreciated. im currently stuck with this. thanks

07-10-2009, 02:03 PM	#4
johngriff Post Whore! Join Date: Jun 2004 Location: Long Beach, CA Posts: 4,103 Trader Rating: (4) Rides Gallery: johngriff Feedback Score: 4 reviews	LENGTH will help you to determine where to splice them in. Its just the 4th 5th and reverse lights. You can wire them backwards and it will be fine. At the end of the day all you need is the reverse sensor anyways, so just do that one. __________________ [email protected]

07-10-2009, 03:19 PM	#5
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	All you need is VSS and reverse. And if you don't care about reverse lights you don't even need it. We've talked about this what, for over a decade? __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-10-2009, 01:14 PM	#2
brian3676 Zilvia Member Join Date: Oct 2006 Location: portland Age: 33 Posts: 205 Trader Rating: (3) Feedback Score: 3 reviews	just use your stock KA one, Take all the sensors out of the KA tranny and take swap then out with the SR tranny sensors then use KA, everything plugs right in

07-10-2009, 01:34 PM	#3
wangan_cruiser kouki man Join Date: Apr 2006 Location: downtown oakland,ca Age: 36 Posts: 3,535 Trader Rating: (36) Feedback Score: 36 reviews	which one to splice? can u tell me

07-10-2009, 06:38 PM	#6
fast-datsun Leaky Injector Join Date: Aug 2002 Posts: 116 Trader Rating: (0) Feedback Score: 0 reviews	Just use the KA harness and switch the SR sensors for the KA sensors you your done